scholarly journals Optical Properties of C−rich (12C, SiC and FeC) Dust Layered Structure of Massive Stars

Author(s):  
wu ruiqing ◽  
Long Mengqiu ◽  
Zhang Xiaojiao ◽  
Wang Yunpeng ◽  
Yao Mengli ◽  
...  

Abstract The composition and structure of interstellar dust are important and complex for the study of the evolution of stars and the interstellar medium (ISM). However, there is a lack of corresponding experimental data and model theories. By theoretical calculations based on ab-initio method, we have predicted and geometry optimized the structures of Carbon-rich (C-rich) dusts, carbon (12C), iron carbide (FeC), silicon carbide (SiC), even silicon (28Si), iron (56Fe), and investigated the optical absorption coefficients and emission coefficients of these materials in 0D (zero−dimensional), 1D, and 2D nanostructures. Comparing the nebular spectra of the supernovae (SN) with the coefficient of dust, we find that the optical absorption coefficient of the 2D 12C, 28Si, 56Fe, SiC and FeC structure corresponds to the absorption peak displayed in the infrared band (5−8) µm of the spectrum at 7554 days after the SN1987A explosion. And it also corresponds to the spectrum of 535 days after the explosion of SN2018bsz, when the wavelength in the range of (0.2−0.8) and (3−10) µm. Nevertheless, 2D SiC and FeC corresponds to the spectrum of 844 days after the explosion of SN2010jl, when the wavelength is within (0.08−10) µm. Therefore, FeC and SiC may be the second type of dust in SN1987A corresponding to infrared band (5−8) µm of dust and may be in the ejecta of SN2010jl and SN2018bsz. The nano−scale C−rich dust size is ∼ 0.1 nm in SN2018bsz, which is 3 orders of magnitude lower than the value of 0.1 µm. In addition, due to the ionization reaction in the supernova remnant (SNR), we also calculated the Infrared Radiation (IR) spectrum of dust cations. We find that the cation of the 2D layered (SiC)2+ has a higher IR spectrum than those of the cation (SiC)1+ and neutral (SiC)0+.

1987 ◽  
Vol 6 (2) ◽  
pp. 173-181 ◽  
Author(s):  
F. Borghese ◽  
P. Denti ◽  
R. Saija ◽  
G. Toscano ◽  
O. I. Sindoni

1991 ◽  
Vol 69 (3-4) ◽  
pp. 317-323 ◽  
Author(s):  
Constantinos Christofides ◽  
Andreas Mandelis ◽  
Albert Engel ◽  
Michel Bisson ◽  
Gord Harling

A photopyroelectric spectrometer with real-time and(or) self-normalization capability was used for both conventional transmission and thermal-wave spectroscopic measurements of amorphous Si thin films, deposited on crystalline Si substrates. Optical-absorption-coefficient spectra were obtained from these measurements and the superior dynamic range of the out-of-phase (quadrature) photopyroelectric signal was established as the preferred measurement method, owing to its zero-background compensation capability. An extension of a photopyroelectric theoretical model was established and successfully tested in the determination of the optical absorption coefficient and the thermal diffusivity of the sample under investigation. Instrumental sensitivity limits of βt ≈ 5 × 10−3 were demonstrated.


1996 ◽  
Vol 426 ◽  
Author(s):  
B. Pashmakov ◽  
H. Fritzsche ◽  
B. Claflin

AbstractThe electrical conductance and optical absorption coefficient of microcrystalline indium oxide (c – In2 O 3-x ) can be changed reversibly by several orders of magnitude by photoreduction and reoxidation. Photoreduction is achieved by exposure to ultraviolet light hv ≥ 3.5eV in vacuum or an inert gas. The effects are similar to those previously observed in amorphous In2 O3-x


Author(s):  
I. F. Кurunov ◽  
A. S. Bliznyukov ◽  
V. N. Titov ◽  
N. V. Logvinov ◽  
D. N. Tikhonov ◽  
...  

Analysis of blast furnaces running experience in Japan, Europe and North America shows, that duration of their operating period determines to a great extent by hearth and bottom lining endurance. Study of structure change of scull and hearth walls and bottom lining at different burden compositions and BF heat conditions will enable to elaborate organization and technical solutions for BF efficiency increasing. Study of hearth scull composition at the level of iron notch and lower at PAO NLMK BF No. 6 after 2nd category overhaul stoppage from 26.08.2016 through 29.09.2016. Lump samples of mass from 10 up to 70 kg were taken with careful visual inspection to exclude oxidized and hydrated pieces. Based on visual inspection of samples as well as petrographic, chemical, X-ray structural and microprobe analysis it was determined, that the scull base comprises products formed during crystallization of heat products. They included a metal, in which a magnetic part (α-iron) is prevailed with iron carbide and graphite inclusions, graphite as a separate phase, slag components with a base of melilite at the level of iron notch and silicates (X-ray amorphous) of variable content of СaO–K2O–Na2O–SiO2–Al2O3system. The quantity of metal and graphite in the hearth walls scull increases from iron notch to the bottom and reaches a value >85 % at the level 300 mm lower than iron notch. Content of titanium compounds in oxide form in all the samples as well as nitrides, carbo-nitrides totally does not exceeds 1–2%. 


1990 ◽  
Vol 117-118 ◽  
pp. 473-476 ◽  
Author(s):  
Makoto Yao ◽  
Wataru Hayami ◽  
Hirohisa Endo

2013 ◽  
Vol 2013 ◽  
pp. 1-4 ◽  
Author(s):  
Hojjatollah K. Salehani ◽  
Maedeh Zakeri

The light absorption of a ZnS quantum dot with a parabolic confinement potential is studied in this paper in the presence of magnetic field perpendicular to dot plane. The Schrodinger equation of a single electron is solved numerically, and energy spectra and wave functions are obtained. Then, the optical absorption coefficients in transition from ground state to different excited states are calculated. The effects the magnetic field and quantum dot width on the optical absorption are investigated. It is found that the optical absorption coefficient has a blue shift by increasing of magnetic field or confinement strength of quantum dot.


Sign in / Sign up

Export Citation Format

Share Document