scholarly journals Numerical Investigation of Pressure Fluctuation and Cavitation inside a Francis Turbine Draft Tube with Air Admission through a Fin

2021 ◽  
Vol 1909 (1) ◽  
pp. 012017
Author(s):  
Ruizhi Zhang ◽  
An Yu ◽  
Michihiro Nishi ◽  
Xianwu Luo
Keyword(s):  
Numerical Investigation ◽  
Pressure Fluctuation ◽  
Draft Tube ◽  
Francis Turbine

scholarly journals State-of-the Art-Powerhouse, Dam Structure, and Turbine Operation and Vibrations

2020 ◽  
Vol 12 (4) ◽  
pp. 1676 ◽  
Author(s):  
Zaher Mundher Yaseen ◽  
Ameen Mohammed Salih Ameen ◽  
Mohammed Suleman Aldlemy ◽  
Mumtaz Ali ◽  
Haitham Abdulmohsin Afan ◽  
...  
Keyword(s):  
Pressure Fluctuation ◽  
Draft Tube ◽  
Hydropower Plant ◽  
Francis Turbine ◽  
Future Research ◽  
Research Directions ◽  
Operation Costs ◽  
Hydropower Plants ◽  
Future Research Directions ◽  
The Relationship

Dam and powerhouse operation sustainability is a major concern from the hydraulic engineering perspective. Powerhouse operation is one of the main sources of vibrations in the dam structure and hydropower plant; thus, the evaluation of turbine performance at different water pressures is important for determining the sustainability of the dam body. Draft tube turbines run under high pressure and suffer from connection problems, such as vibrations and pressure fluctuation. Reducing the pressure fluctuation and minimizing the principal stress caused by undesired components of water in the draft tube turbine are ongoing problems that must be resolved. Here, we conducted a comprehensive review of studies performed on dams, powerhouses, and turbine vibration, focusing on the vibration of two turbine units: Kaplan and Francis turbine units. The survey covered several aspects of dam types (e.g., rock and concrete dams), powerhouse analysis, turbine vibrations, and the relationship between dam and hydropower plant sustainability and operation. The current review covers the related research on the fluid mechanism in turbine units of hydropower plants, providing a perspective on better control of vibrations. Thus, the risks and failures can be better managed and reduced, which in turn will reduce hydropower plant operation costs and simultaneously increase the economical sustainability. Several research gaps were found, and the literature was assessed to provide more insightful details on the studies surveyed. Numerous future research directions are recommended.

Experimental Evidence of Hydroacoustic Pressure Waves in a Francis Turbine Elbow Draft Tube for Low Discharge Conditions

2009 ◽  
Vol 131 (8) ◽  
Author(s):  
Jorge Arpe ◽  
Christophe Nicolet ◽  
François Avellan
Keyword(s):  
Pressure Fluctuation ◽  
Swirling Flow ◽  
Draft Tube ◽  
Flow Direction ◽  
Pressure Fluctuations ◽  
Operating Conditions ◽  
Hydropower Plant ◽  
Francis Turbine ◽  
Scale Model ◽  
Vortex Rope

The complex three-dimensional unsteady flow developing in the draft tube of a Francis turbine is responsible for pressure fluctuations, which could prevent the whole hydropower plant from operating safely. Indeed, the Francis draft tube is subjected to inlet swirling flow, divergent cross section, and the change of flow direction. As a result, in low discharge off-design operating conditions, a cavitation helical vortex, so-called the vortex rope develops in the draft tube and induces pressure fluctuations in the range of 0.2–0.4 times the runner frequency. This paper presents the extensive unsteady wall pressure measurements performed in the elbow draft tube of a high specific speed Francis turbine scale model at low discharge and at usual plant value of the Thoma cavitation number. The investigation is undertaken for operating conditions corresponding to low discharge, i.e., 0.65–0.85 times the design discharge, which exhibits pressure fluctuations at surprisingly high frequency value, between 2 and 4 times the runner rotation frequency. The pressure fluctuation measurements performed with 104 pressure transducers distributed on the draft tube wall, make apparent in the whole draft tube a fundamental frequency value at 2.5 times the runner frequency. Moreover, the modulations between this frequency with the vortex rope precession frequency are pointed out. The phase shift analysis performed for 2.5 times the runner frequency enables the identification of a pressure wave propagation phenomenon and indicates the location of the corresponding pressure fluctuation excitation source in the elbow; hydroacoustic waves propagate from this source both upstream and downstream the draft tube.

Unsteady vortical flow simulation in a Francis turbine with special emphasis on vortex rope behavior and pressure fluctuation alleviation

2017 ◽  
Vol 231 (3) ◽  
pp. 215-226 ◽  
Author(s):  
Xianwu Luo ◽  
An Yu ◽  
Bin Ji ◽  
Yulin Wu ◽  
Yoshinobu Tsujimoto
Keyword(s):  
Pressure Fluctuation ◽  
Swirling Flow ◽  
Draft Tube ◽  
Pressure Fluctuations ◽  
Flow Simulation ◽  
Vortical Flow ◽  
Francis Turbine ◽  
Vortex Rope ◽  
Spiral Vortex ◽  
Baroclinic Torque

Hydro turbines operating at partial flow conditions usually have vortex ropes in the draft tube that generate large pressure fluctuations. This unsteady flow phenomenon is harmful to the safe operation of hydropower stations. This paper presents numerical simulations of the internal flow in the draft tube of a Francis turbine with particular emphasis on understanding the unsteady characteristics of the vortex rope structure and the underlying mechanisms for the interactions between the air and the vortices. The pressure fluctuations induced by the vortex rope are alleviated by air admission from the main shaft center, with the water-air two phase flow in the entire flow passage of a model turbine simulated based on the homogeneous flow assumption. The results show that aeration with suitable air flow rate can alleviate the pressure fluctuations in the draft tube, and the mechanism improving the flow stability in the draft tube is due to the change of vortex rope structure and distribution by aeration, i.e. a helical vortex rope at a small aeration volume while a cylindrical vortex rope with a large amount of aeration. The preferable vortex rope distribution can suppress the swirl at the smaller flow rates, and is helpful to alleviate the pressure fluctuation in the draft tube. The analysis based on the vorticity transport equation indicates that the vortex has strong stretching and dilation in the vortex rope evolution. The baroclinic torque term does not play a major role in the vortex evolution most of the time, but will much increase for some specific aeration volumes. The present study also depicts that vortex rope is mainly associated with a pair of spiral vortex stretching and dilation sources, and its swirling flow is alleviated little by the baroclinic torque term, whose effect region is only near the draft tube inlet.

Effect of J-Groove on the Suppression of Swirl Flow in a Conical Diffuser

2010 ◽  
Vol 132 (7) ◽  
Author(s):  
Junichi Kurokawa ◽  
Hiroshi Imamura ◽  
Young-Do Choi
Keyword(s):  
Experimental Study ◽  
Pressure Fluctuation ◽  
Draft Tube ◽  
Swirl Flow ◽  
Francis Turbine ◽  
Water Region ◽  
Swirl Intensity ◽  
Conical Diffuser ◽  
Dead Water ◽  
Divergent Angle

The purpose of this study is to examine the validity of J-grooves in controlling and suppressing the swirl flow in a conical diffuser, for draft surge suppression in a Francis turbine, which is caused by the swirl flow from the runner outlet into the draft tube. “J-groove” composed of shallow grooves and mounted parallel to the pressure gradient on the diffuser wall is a very simple passive device to suppress several abnormal phenomena in turbomachinery. The experimental study has been performed using the conical diffuser with a divergent angle of 20 deg. The measured results of the velocity distribution in the diffuser show that a considerable reduction in the swirl intensity is attained by using J-grooves. Besides, the amplitude of pressure fluctuation caused by the rotation of the vortex core around the dead water region near the diffuser inlet is reduced by J-grooves.

Pressure Fluctuation Mitigation in a Francis Turbine With Water Injection: Computational Study

2018 ◽  
Author(s):  
Muhannad Altimemy ◽  
Cosan Daskiran ◽  
Bashar Attiya ◽  
I-Han Liu ◽  
Alparslan Oztekin
Keyword(s):  
Pressure Fluctuation ◽  
Draft Tube ◽  
Computational Study ◽  
Water Injection ◽  
Francis Turbine ◽  
Navier Stokes ◽  
Tube Surface ◽  
Vortex Rope ◽  
Central Vortex ◽  
Dynamics Simulations

Computational fluid dynamics simulations were performed on Francis turbine using Reynolds-averaged Navier-Stokes (RANS) with k-ω SST turbulence model. Simulations were conducted at the turbine’s best efficiency point with a Reynolds number of 2.01 × 107. Water injection was admitted from the runner cone in the stream-wise direction. The aim of this process was to investigate the influence of water injection on the turbine performance and the pressure pulsation. The water injection did not affect the nominal value of the turbine’s power generation. Straight vortex rope was observed at the centerline of the draft tube. Moreover, helix-shaped vortex ropes were obtained near the draft tube surface. The water injection expands the central vortex rope, but it did not suppress or disrupt the helix-shaped peripheral vortex rope near the draft tube surface. The pressure fluctuation became less regular after the water injection, but the fluctuation level remained similar.

Numerical Simulation of Pressure Fluctuation in Draft Tube of Large Francis Turbine

2007 ◽  
Author(s):  
Cuilin Liao ◽  
Fujun Wang ◽  
Xiaoqin Li ◽  
Yuliang Zhu
Keyword(s):  
Pressure Fluctuation ◽  
Swirling Flow ◽  
Transport Model ◽  
Draft Tube ◽  
Numerical Study ◽  
Hydraulic Turbine ◽  
Dominant Frequency ◽  
Numerical Results ◽  
Francis Turbine ◽  
Pressure Amplitude

The pressure fluctuation caused by swirling flow in draft tube is one of the main reasons of vibration in hydraulic turbine. It directly affects the steady operation of hydraulic turbine unit. The pressure fluctuation in draft tube of a large Francis turbine can’t be obtained accurately by similarity law from model test, and prototype test is difficult to carry out and costs too much. Therefore, it is necessary to predict pressure fluctuation in draft tube numerically and provide scientific reference for mitigating and suppressing pressure fluctuation. This paper describes a numerical study of unsteady flow in the draft tube of a large Francis turbine in a Hydropower Station of China by using the Reynolds averaged Navier–Stokes (RANS) approach with a Reynolds stress transport model (RSM), validating the numerical results against experimental data. The numerical results successfully represent the vortex rope. The pressure fluctuation patterns in different parts of the draft tube including the cone, elbow and diffuser are analyzed. The pressure fluctuation in the cone and elbow is relative steady, and it has an obvious dominant frequency which is approximately 0.28 and 0.3 times of the runner rotational frequency. These results show very good agreement with experiments. The largest pressure amplitude appears in the draft tube cone downstream side and the draft elbow inside. The pressure fluctuation in the diffuser is stochastic, and the amplitude is small. Additionally, the pressure distributions on the horizontal computational section of the draft tube are analyzed.

Sign in / Sign up

Export Citation Format

Share Document