vortex rope
Recently Published Documents


TOTAL DOCUMENTS

100
(FIVE YEARS 32)

H-INDEX

15
(FIVE YEARS 3)

Energies ◽  
2021 ◽  
Vol 14 (22) ◽  
pp. 7626
Author(s):  
Tao Guo ◽  
Lihui Xu ◽  
Wenquan Wang

The inter-blade passage vortex, the vortex rope of the draft tube, and the vortex in the guide apparatus are the characteristics of flow instability of the Francis turbine, which may lead to fatigue failure in serious cases. In the current study, in order to accurately capture the transient turbulent characteristics of flow under different conditions and fully understand the flow field and vortex structure, we conduct a simulation that adopts sliding grid technology and the large-eddy simulation (LES) method based on the wall-adapting local eddy viscosity (WALE) model. Using the pressure iso-surface method, the Q criterion, and the latest third-generation Liutex vortex identification method, this study analyzes and compares the inter-blade passage vortex, the vortex rope of the draft tube, and the outflow and vortex in the guide apparatus, focusing on the capture ability of flow field information by various vortex identification methods and the unique vortex structure under the condition of a small opening. The results indicate that the dependence of Liutex on the threshold is small, and the scale range of the flow direction vortex captured by Liutex is wider, but the ability of the spanwise vortex is relatively weak. The smaller the opening, the more disorderly the vortexes generated in each component and the more unstable the flow field. In the draft tube, the original shape of the vortex rope is destroyed due to the interaction between vortexes. Under the condition of a small opening, an inter-blade passage vortex is generated, affecting the efficient and stable operation of the turbine.


Processes ◽  
2021 ◽  
Vol 9 (7) ◽  
pp. 1182
Author(s):  
Seung-Jun Kim ◽  
Yong Cho ◽  
Jin-Hyuk Kim

Under low flow-rate conditions, a Francis turbine exhibits precession of a vortex rope with pressure fluctuations in the draft tube. These undesirable flow phenomena can lead to deterioration of the turbine performance as manifested by torque and power output fluctuations. In order to suppress the rope with precession and a swirl component in the tube, the use of anti-swirl fins was investigated in a previous study. However, vortex rope generation still occurred near the cone of the tube. In this study, unsteady-state Reynolds-averaged Navier–Stokes analyses were conducted with a scale-adaptive simulation shear stress transport turbulence model. This model was used to observe the effects of the injection in the draft tube on the unsteady internal flow and pressure phenomena considering both active and passive suppression methods. The air injection affected the generation and suppression of the vortex rope and swirl component depending on the flow rate of the air. In addition, an injection level of 0.5%Q led to a reduction in the maximum unsteady pressure characteristics.


2021 ◽  
Vol 11 (12) ◽  
pp. 5529
Author(s):  
Aili Shen ◽  
Yimin Chen ◽  
Jianxu Zhou ◽  
Fei Yang ◽  
Hongliang Sun ◽  
...  

To understand the hydraulic vibration characteristics in a traditional hydropower system and identify possible exciting sources that may induce serious hydraulic vibrations in the flow passage, experimental tests and numerical calculations were conducted for different operating conditions. The experimental results show that the pressure fluctuations are mainly related to the vortex rope phenomena in the draft tube, and the dominant frequency of pressure fluctuation is 0.2~0.4 times the runner rotational frequency (fn). The numerical results show all the attenuating factors are negative, which indicates the system itself is stable on the condition that all the hydraulic elements have steady operating performance. The free vibration analyses confirm that the frequency range of the vortex rope in the draft tube partly overlaps the natural frequencies of the hydropower system. Apart from the vortex rope, the runner rotational frequency is another common frequency that is approximately equal to the frequency of the 10th vibration mode. From the vibration mode shapes, it is inferred that a small disturbance in its frequency close or equal to a specific natural frequency of the vibration mode could induce large pressure oscillations in the tail tunnel. In light of the system’s response to different forcing frequencies, the vortex rope formed under off-design conditions and runner rotational frequency is verified to be the potential exciting source of a traditional hydropower system, and the frequency 0.2 fn is much more dangerous than other disturbances to the system.


2021 ◽  
Vol 774 (1) ◽  
pp. 012144
Author(s):  
H Holmström ◽  
J Sundström ◽  
M J Cervantes
Keyword(s):  

Author(s):  
Mohammad Hossein Khozaei ◽  
Arthur Favrel ◽  
Toshitake Masuko ◽  
Naoki Yamaguchi ◽  
Kazuyoshi Miyagawa

Abstract This paper focuses on the generation of twin vortex rope in the draft-tube elbow of a Francis turbine at deep part-load operation through analyzing the results of model tests along with numerical simulations. Model tests, including pressure fluctuations measurements, are conducted over 10 speed factors. By considering the frequency of the pressure fluctuations with respect to the swirl intensity at the runner outlet, the part-load operating range is divided into three regimes, with two clear transitions between each occurring at swirl numbers 0.4 and 1.7. For operating conditions with a swirl number S>0.4, a linear correlation between the frequency of the precessing vortex core and the swirl number is established. During deep part-load regime (S>1.7), low-frequency pressure fluctuations appear. Their frequency feature another linear correlation with the swirl number. Unsteady CFD simulation of the full domain is performed to elucidate the generation mechanisms of the low-frequency fluctuations. By tracking the center of the vortical structures along the draft-tube, generation of three vortices in the elbow responsible for the pressure fluctuations at the lowest frequency is highlighted: the main PVC hits the draft-tube wall in the elbow resulting in its break down into three vortices rotating with half the rotational speed of the PVC. Two of the vortices rotate with opposite angular position, constituting a structure of twin vortices. The periodic rotation of these three vortices in the elbow induces the low-frequency pressure fluctuations.


Sign in / Sign up

Export Citation Format

Share Document