scholarly journals A review on graft compatibilizer for thermoplastic elastomer blend

2021 ◽  
Vol 2080 (1) ◽  
pp. 012003
Author(s):  
K.K. Nitiyah ◽  
Luqman Musa ◽  
M.S.M. Rasidi ◽  
Shayfull Zamree Abd Rahim ◽  
Rozyanty Rahman ◽  
...  
Keyword(s):  
Lactic Acid ◽  
Natural Rubber ◽  
Thermoplastic Elastomer ◽  
Synthetic Polymers ◽  
The Other ◽  
Poly Lactic Acid ◽  
Melt Blending ◽  
Internal Mixer ◽  
The Impact ◽  
Elastomer Blend

Abstract A biodegradable thermoplastic elastomer (TPE) blend is developed by blending poly (lactic acid) (PLA) and natural rubber (NR) or epoxidized natural rubber (ENR) and it is a sustainable substitution in recent years for synthetic polymers. PLA is high in mechanical strength and compostable, but it is highly stiff and brittle. The incorporation of NR or ENR to PLA increases the impact strength and toughness of PLA. However, the disparity in polarity between PLA and elastomer phase like NR and ENR results in TPE blend being incompatible. Hence, compatibilization is essential to improve its polarity and develop interactions. Compatibilizer that composed of two different polymer is known is graft compatibilizer with the aid of grafting agent. The graft compatibilizers are divided into two categories. The first type is made up of one polymer and grafting agent and, the other one is composed of two polymer groups and grafting agent. These two types of graft compatibilizer can be prepared via two different method such as direct melt blending and solution. Apart from this, the TPE blend is produced via the melt blending technique with mixing machines such as internal mixer and extruder. This article has reviewed the preparation of the graft compatibilizer and blending technique of TPE. Based on the findings, the graft compatibilizers has a significant role in improving miscibility and compatibility across blend composed of different phase.

Mechanical Properties and Phase Morphology of Poly(Lactic Acid)/Acrylonitrile-Butadiene Rubber/Organoclay Nanocomposites Prepared by Melt Blending

2018 ◽  
Vol 775 ◽  
pp. 13-19
Author(s):  
Sirirat Wacharawichanant ◽  
Kasana Chomphunoi ◽  
Chawisa Wisuttrakarn ◽  
Manop Phankokkruad
Keyword(s):  
Mechanical Properties ◽  
Lactic Acid ◽  
Impact Strength ◽  
Phase Morphology ◽  
Poly Lactic Acid ◽  
Butadiene Rubber ◽  
Melt Blending ◽  
Acrylonitrile Butadiene Rubber ◽  
Internal Mixer ◽  
The Impact

This work investigated the mechanical properties and phase morphology of poly(lactic acid) (PLA)/acrylonitrile-butadiene rubber (NBR) blends and nanocomposites, which prepared by melt blending in an internal mixer. The contents of NBR were 5, 10, 15 and 20 wt% and the content of organoclay was 3 phr. The impact test showed that the impact strength of PLA/NBR blends increased with an increase of NBR content and the impact strength of the blends was more than eight times by adding NBR 10 wt% when compared with neat PLA. The tensile test showed that Young’s modulus and tensile strength of PLA/NBR blends and nanocomposites decreased after adding NBR and organoclay. While the strain at break of the NBR blends increased with increasing NBR content. This result is attributed to the rubber phase in NBR in a cause the increment of elongation and elasticity in PLA/NBR blends. The morphology of PLA/NBR blends observed the fractured surface was rougher than that of pure PLA. This observation indicates that the addition of NBR in PLA can change the brittle fracture of PLA to ductile fracture, which has an effect to the strain at break or elongation of PLA. However, the morphology of the PLA/NBR blends were also observed the phase separation of the dispersed NBR phase and PLA matrix phase, and appeared the voids in a polymer matrix. The addition of organoclay had an effect slightly on the morphology of the blends. From X-ray diffraction, results found that PLA/organoclay and PLA/NBR/organoclay nanocomposites showed the intercalated structure, which PLA chains were inserted into the interlayer of clay due to the increase of d-spacing.

scholarly journals The combined plasticization of jute and tung oil anhydride for jute fiber reinforced poly(lactic acid) composites

2021 ◽  
pp. 096739112110576
Author(s):  
Ying Zhou ◽  
Can Chen ◽  
Lan Xie ◽  
Xiaolang Chen ◽  
Guangqiang Xiao ◽  
...  
Keyword(s):  
Lactic Acid ◽  
Physical And Mechanical Properties ◽  
Complex Viscosity ◽  
Poly Lactic Acid ◽  
Melt Blending ◽  
Sem Images ◽  
Pseudoplastic Fluid ◽  
Tung Oil ◽  
Biodegradable Poly ◽  
The Impact

In this work, novel plasticizing biodegradable poly (lactic acid) (PLA) composites were prepared by melt blending of jute and tung oil anhydride (TOA), and the physical and mechanical properties of PLA/jute/TOA composites were tested and characterized. The impact strength of PLA/jute/TOA composites significantly increases with increasing the content of TOA. The SEM images of fracture surface of PLA/jute/TOA composites become rough after the incorporation of TOA. In addition, TOA changes the crystallization temperature and decomposition process of PLA/jute/TOA composites. With increasing the amount of TOA, the value of storage modulus (E′) of PLA/jute/TOA composites gradually increases. The complex viscosity (η*) values for all samples reduce obviously with increasing the frequency, which means that the pure PLA and PLA/jute/TOA composites is typical pseudoplastic fluid. This is attributed to the formation of crosslinking, which restricts the deformation of the composites.

Toughness enhancement of poly(lactic acid) by melt blending with natural rubber

2011 ◽  
pp. n/a-n/a ◽  
Author(s):  
Ruedee Jaratrotkamjorn ◽  
Chuanpit Khaokong ◽  
Varaporn Tanrattanakul
Keyword(s):  
Lactic Acid ◽  
Natural Rubber ◽  
Poly Lactic Acid ◽  
Melt Blending ◽  
Toughness Enhancement

scholarly journals Poly(Lactic Acid)/Natural Rubber Blends

2017 ◽  
Vol 885 ◽  
pp. 298-302 ◽  
Author(s):  
Sándor Hajba ◽  
Tamás Tábi
Keyword(s):  
Lactic Acid ◽  
Natural Rubber ◽  
Poly Lactic Acid ◽  
Flexural Properties ◽  
Application Field ◽  
Rubber Blends ◽  
The One ◽  
Internal Mixer

Nowadays biopolymers are in the focus of many research and Poly (lactic acid) (PLA) is the one of the candidates of this field. The rigid behavior of PLA limits its application field, thus it is mostly used for rigid packing. Our research aim is to increase PLA ductility while keeping the biodegradability as much as possible. In our study, PLA was melt mixed in an internal mixer with 5, 10, 20 and 30 wt% natural rubber. It was possible to increase the toughness to a three time higher value compared to neat PLA while the tensile and flexural properties only decreased maximum 30%.

Comparison of Morphology and Mechanical Properties of Polyoxymethylene/Cellulose and Poly(Lactic Acid)/Cellulose Composites

2018 ◽  
Vol 916 ◽  
pp. 19-23 ◽  
Author(s):  
Sirirat Wacharawichanant ◽  
Nisarat Wimonsupakit ◽  
Sasithorn Kuhaudomlap
Keyword(s):  
Mechanical Properties ◽  
Lactic Acid ◽  
Microscopy Study ◽  
Electron Microscopy Study ◽  
Poly Lactic Acid ◽  
Melt Mixing ◽  
Cellulose Composites ◽  
Internal Mixer ◽  
The Impact ◽  
Morphology And Mechanical Properties

The objective of this study is to fabricate the polyoxymethylene (POM)/microcrystalline cellulose (MCC) and poly(lactic acid) (PLA)/MCC composites, and to compare the effect of MCC on the morphology and mechanical properties of POM and PLA. The polymer composites were prepared by melt mixing in an internal mixer and molded by compression molding. The MCC concentrations were 1, 3, 5, 7, 10, 15 and 10% by weight. From scanning electron microscopy study observes the fracture surface of POM and PLA composites is much rough and the roughness increases with increasing MCC content. This observation indicates MCC induces the ductile fracture characteristic of POM and PLA. The addition of MCC can improve the impact strength of PLA composite and improve Young’s modulus of both POM and PLA composites. While the tensile strength and strain at break decrease after adding MCC. In summary, MCC can enhance the morphology and mechanical properties of PLA composites is better than POM composites.

Properties of Poly(Lactic Acid) Blended with Natural Rubber-Graft- Poly(Acrylic Acid)

2020 ◽  
Vol 845 ◽  
pp. 45-50
Author(s):  
Thamolwan Udomkitpanya ◽  
Kawee Srikulkit
Keyword(s):  
Mechanical Properties ◽  
Lactic Acid ◽  
Acrylic Acid ◽  
Natural Rubber ◽  
Impact Testing ◽  
Poly Lactic Acid ◽  
Scanning Calorimetry ◽  
Ft Ir ◽  
Internal Mixer ◽  
Poly Acrylic Acid

Poly(acrylic acid) (PAA) was grafted onto natural rubber (NR) to improve the compatibility of NR and poly(lactic acid) (PLA). Polymer blend between PLA and NR-g-PAA was prepared by an internal mixer. Fourier-transform infrared spectroscopy (FT-IR), tensile testing, impact testing, thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) were employed to determine the functional group, mechanical properties and thermal properties of blends, respectively. Results showed that the addition of NR-g-PAA significantly improved the elongation, impact strength and thermal stability of blends. The P70N30 was the optimum composition to obtain improved mechanical properties of PLA.

Crystallization Behavior of Poly(lactic acid) Nucleated by a Hydrazide Compound

2013 ◽  
Vol 710 ◽  
pp. 85-88 ◽  
Author(s):  
Cheng Lang Li ◽  
Qiang Dou
Keyword(s):  
Differential Scanning Calorimetry ◽  
Lactic Acid ◽  
Crystallization Behavior ◽  
Polarized Light ◽  
Nucleating Agent ◽  
Poly Lactic Acid ◽  
Melt Blending ◽  
Scanning Calorimetry ◽  
Internal Mixer ◽  
Melting And Crystallization

A hydrazide compound (N-4) was used as a nucleating agent to induce the crystallization of poly (lactic acid) (PLA). PLA/N-4 samples were prepared by melt blending in an internal mixer. The melting and crystallization behavior and spherulitic morphology of the samples doped with different contents of N-4 were investigated by means of differential scanning calorimetry (DSC) and polarized light microscopy (PLM). It is found that the crystallization temperature and crystallinity increased but the spherulitic size of PLA decreased for the nucleated samples. It is indicated that N-4 is an effective nucleating agent for PLA.

scholarly journals Dynamic mechanical properties and morphology characteristics of rubber-toughened poly(lactic acid)

2019 ◽  
Vol 90 ◽  
pp. 01001
Author(s):  
Mohd Shaiful Zaidi Mat Desa ◽  
Azman Hassan ◽  
Agus Arsad ◽  
Masleeyati Yusop
Keyword(s):  
Lactic Acid ◽  
Natural Rubber ◽  
Storage Modulus ◽  
Dynamic Mechanical Properties ◽  
Poly Lactic Acid ◽  
Rubber Blends ◽  
Blending Method ◽  
Twin Screw ◽  
Lower Temperature ◽  
The Impact

This study investigates the effect of natural rubber (NR), epoxidised natural rubber (ENR), and core-shell rubber (CSR) as toughening agents for poly(lactic acid) (PLA). PLA/rubber blends were prepared by using melt blending method in a twin-screw extruder, with the content of rubbers was fixed at 5 wt. %. All PLA/rubber blends exhibited lower storage modulus compared to neat PLA. Two-stage storage modulus (E’) was also observed, where the first stage occurred at lower temperature corresponded to the glass transition temperature (Tg) of rubber components, whereas the second E’ corresponded to the Tg of PLA. The impact fracture surface of PLA/rubber blends also exhibited phase-separated morphology where the spherical-shaped rubber particles were clearly present in the PLA matrix.

Improvement of Poly(Lactic Acid) Properties by Ethylene-Octene Copolymer and Organoclay

2020 ◽  
Vol 1009 ◽  
pp. 43-48
Author(s):  
Sirirat Wacharawichanant ◽  
Paweena Hanjai ◽  
Sanya Khongaio ◽  
Manop Phankokkruad
Keyword(s):  
Lactic Acid ◽  
Domain Size ◽  
Poly Lactic Acid ◽  
Mechanical And Thermal Properties ◽  
Melt Mixing ◽  
Before And After ◽  
Ethylene Octene Copolymer ◽  
Surface Modified ◽  
Internal Mixer ◽  
The Impact

The work studied the morphological, mechanical and thermal properties of poly(lactic acid) (PLA)/ethylene-octene copolymer (EOC) blends before and after adding the montmorillonite clay surface modified with 25-30% of octadecylamine (clay-ODA). The PLA/EOC blends and composites were prepared by melt mixing in an internal mixer. The EOC contents were 5, 10, 20, 30 wt% and clay-ODA contents were 1 and 3 phr. The morphology analysis showed that the addition of clay-ODA could improve the miscibility of PLA and EOC phases due to the domain size of dispersed EOC phase decreased with increasing clay-ODA content. X-ray diffraction revealed the formation of intercalated/exfoliated structure in PLA/clay-ODA and PLA blend composites. The mechanical properties showed that the impact strength of PLA/EOC blends dramatically increased with increasing EOC content up to 10 wt%. The strain at break of PLA blends increased with increasing EOC content. Moreover, the incorporation of clay-ODA increased significantly Young’s modulus of PLA and PLA/EOC blends with increasing clay-ODA content. The thermal stability of PLA/EOC blends improved with the addition of a small amount of clay-ODA.

Sign in / Sign up

Export Citation Format

Share Document