scholarly journals Cause Analysis and Treatment Measures of Tunnel Diseases in Complex Geological Structure with Gypsum-bearing Rock Layers

2020 ◽  
Vol 570 ◽  
pp. 022003
Author(s):  
Chaoye Song ◽  
Weiguo He ◽  
Hanchen Wang ◽  
Weihao Wu
Keyword(s):  
Geological Structure ◽  
Cause Analysis ◽  
Treatment Measures ◽  
Complex Geological Structure

Review of Matheron’s Kriging Method and its Application at the Estimation of Mineral Deposits

Veritas ◽  
2019 ◽  
Vol 20 (1) ◽  
pp. 59
Author(s):  
Edgar M Marín Ballón ◽  
Hugo Jiménez-Pacheco ◽  
Máximo O. M. Rondón Rondón ◽  
Antonio E. Linares Flores Castro ◽  
Ferly E. Urday Luna
Keyword(s):  
Geological Structure ◽  
Mineral Deposits ◽  
Kriging Method ◽  
Geostatistical Methods ◽  
Recoverable Reserves ◽  
Complex Geological Structure ◽  
The Mean ◽  
Industrial Software ◽  
Strict Stationarity ◽  
Mining Exploration

The Geostatistics provides effective tools for the solution of many problems of engineering in which the location in the space of the variable under study is considered, based on definitions of mathematics that provide the necessary foundation for its application. In particular, the Geostatistics are applied in the spatial estimation of the recoverable reserves of mineral deposits. The geostatistical methods that are used in the estimation of mineral deposits are implemented in industrial software and consider the evaluation of the complex geological structure, but these softwares only display the obtained results with an input data and do not exhibit the concepts thatthey use during the process or the methodology of its application. This happens particularly with the Kriging method, which is based on the assumption of strict stationarity, taking into account changes in the mean and local variations, therefore unreliable. In this study is established to review the Kriging method, its application in the estimation of the recoverable reserves of mining deposits and the relevance of the developed model established particularly in mines ofPeru, which use this method as part of the mining exploration for the evaluation of the feasibility of exploitation.

Mechanics Research on Rock Stress and Deformation of Lancang River Canyon's Large - Scale Dumping Deformation

2013 ◽  
Vol 353-356 ◽  
pp. 318-323
Author(s):  
Song Ye ◽  
Yu Sheng Li ◽  
Qian Guo
Keyword(s):  
Large Scale ◽  
Geological Structure ◽  
Deformation Characteristics ◽  
Deep Part ◽  
Trailing Edge ◽  
Geological Surveys ◽  
Depth Analysis ◽  
Numerical Simulation Methods ◽  
Complex Geological Structure ◽  
Stress And Deformation

This article is based on geological surveys combined with finite element and discrete element numerical simulation methods. In-depth analysis of the complex geological structure, deformation characteristics and stress - deformation problems of dumping rock, we clarify different deformation characteristics of deformable landslide inside, at the bottom and the deep part of trailing edge, and demonstrate the deformation will gradually shift from dumping to shear slip. Potential deformation failure mode will be dumped into the whole sliding - tension, which is controlled by the bottom broken belt, and potential deformation is mainly subject to the bottom fault F207-3 of deformed rock and the dumping broken belt at the deep part of trailing edge.

APPLICATION OF A MULTIDIMENSIONAL DETERMINISTIC-STATISTICAL NUMERICAL CORRELATION MODEL TO REFINE THE STRUCTURE OF THE AS11 HORIZON OF THE ZAPADNO-KAMYNSKOYE FIELD

2021 ◽  
Vol 7 (3) ◽  
pp. 123-135
Author(s):  
Anatoly M. NIKASHKIN ◽  
Alexey A. KLIMOV
Keyword(s):  
Oil And Gas ◽  
Geological Structure ◽  
Correlation Model ◽  
Gas Reservoirs ◽  
Work Related ◽  
Correlation Models ◽  
Complex Geological Structure ◽  
Geophysical Information ◽  
Well Correlation ◽  
Clay Layers

One of the primary and significant tasks in the construction of geological models of oil and gas reservoirs and development facilities is the problem of correlation of productive layers. This task, as a rule, is reduced to the identification and areal tracing of presumably even-aged oil and gas strata, horizons, and layers characterized by clear boundaries between sand strata and clay layers overlapping them. The practice of work related to modeling the structure of oil and gas horizons, layers and strata indicates that the correlation is not always unambiguous. The ambiguity is especially noticeable when correlating strata characterized by a clinoform structure, one of the examples is the Achimov strata. The most reliable basis for well correlation is GIS materials and lithological features of the interlayers forming individual layers. Clay interlayers and clay strata separating productive deposits provide valuable information when choosing a correlation model in sedimentary sections. These interlayers are characterized by the greatest consistency in area and are most clearly displayed on geophysical diagrams by the nature of the drawings of GIS curves. However, even in this case, i. e. when using the entire accumulated volume of the most diverse lithological and field-geophysical information, the correlation models of the sections turn out to be different and often even opposite. In this paper, the authors had to face a similar situation when correlating the horizon AS11 of the Zapadno-Kamynskoye field. The paper describes a method for clarifying the position of the chops of the productive horizon of oil and gas deposits using a multidimensional deterministic-statistical numerical model of the correlation of sedimentary strata. The proposed approach allows us to uniquely determine the positions of the chops in the conditions of a complex geological structure of the object, high thin-layered heterogeneity. A concrete example shows the advantages of the proposed approach in comparison with the traditional one.

Comprehensive study of the geological structure Verkhneyakovlev deposits of the Tagul field in the process of justifications for operational drilling

2021 ◽  
pp. 85-97
Author(s):  
A. S. Titenkov ◽  
Yu. N. Utyashev ◽  
A. A. Evdoshchuk ◽  
V. A. Belkina ◽  
D. V. Grandov
Keyword(s):  
Complex Structure ◽  
Geological Structure ◽  
Reservoir Rock ◽  
Rock Properties ◽  
Capital Costs ◽  
Complex Geological Structure ◽  
Well Correlation ◽  
Effective Development ◽  
The Cost ◽  
Available Information

Currently, most of the fields being put into development are characterized by a complex geological structure, both in terms of section and in terms of plan. The solution of all geological tasks, including such important ones as the preparation of exploration projects, operation and effective development management, is impossible without creating models that reflect the main features of the variability of target parameters. The construction of adequate models of objects with a complex structure requires the involvement of all available information. The accuracy of the geological model is mostly determined by the accuracy of the well correlation. Paleosols are a new marker for the complex-built layers of the VAk-2 and VAk-3(1) of the Tagul field, which contributes to the validity of the correlation of the section of these layers. The reliability of the model was also improved by the use of the results of facies analysis. This analysis showed that the sedimentation of the studied objects includes channel and floodplain facies. Reservoir rock properties of these facies differ significantly. The updated model is characterized by a reduction in the oil-bearing area and the amount of reserves. The implementation of the model will optimize the project fund of wells and reduce the cost of well intervention. Economically, this means reducing capital costs and increasing the profitability of the project.

Explosive Fragmentation of Rock Masses with Heterogeneous Structure

2021 ◽  
pp. 135-138
Author(s):  
B.V. Ekvist ◽  
N.G. Barnov
Keyword(s):  
Geological Structure ◽  
Strength Properties ◽  
Open Pit ◽  
Heterogeneous Structure ◽  
Rock Masses ◽  
Variable Delays ◽  
Explosive Fragmentation ◽  
Complex Geological Structure ◽  
Technical Properties

A method to optimize drilling and blasting parameters with account of the physical and technical properties of rocks within the blasted block is proposed to improve the quality of blasting in open pit mines characterized by complex geological settings. The results of laboratory tests are provided that confirm improvement in the quality of rock sample crushing by blasting charges with variable delays and locations, depending on the strength properties of the samples, relative to blasting charges with unchanged parameters. The proposed method can be used in combination with GPR surveys of the rock mass. Explosive fragmentation of the rock masses with complex structures is characterized with a number of features caused by changes in the strength properties within the blasted block. In order to optimize the fragmentation efficiency of rock masses with complex geological structure, it is required to assess physical and technical properties of rocks and to determine their location and variations of the strength properties within the blasted block. It is possible to quickly assess the physical and technical properties of the blasted rocks using the surface georadar method. The outcome of this method is georeferencing of the reoradar data to the location and properties of the rocks to be blasted, along with the methodology of applying the georadar surveys, selection of the areal assembly type depending on the size and properties of detected jointing, and economic justification of applying this method. The novelty consists in linking the georadar data on the rocks to be blasted with drilling and blasting parameters.

scholarly journals INFLUENCE OF PARAMETERS OF EXPLOSIVE DESTRUCTION OF MINING BLOCKS OF COMPLEX GEOLOGICAL STRUCTURE ON THE PREPARATION OF THE MINING MASS FOR PROCESSING

2018 ◽  
pp. 68-74
Author(s):  
К.V. Babii
Keyword(s):  
Particle Size ◽  
Rock Mass ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Iron Ore ◽  
Geological Structure ◽  
Contact Zones ◽  
Complex Geological Structure ◽  
A Charge ◽  
Explosive Destruction

Purpose: to investigate the influence of the parameters of explosive destruction of mining blocks of complex geological structure on the production processes of mining and processing of iron ore. Determine the stability of the escarpment slopes during excavation of rocks in ore mining blocks with barren layers. Results. The analysis of geophysical methods for studying the structure of deposits. It is proposed to use the magnetic susceptibility method for well logging. The structure of mining blocks of a complex geological structure with contact zones "ore - host rocks" was investigated. It has been proven that for the effective use of equipment for the pre-enrichment of ore in a quarry there are conditions: the regulation of the granulometric composition of the rock mass and the reduction of ore splices with overburden rocks. It is proposed to use a charge design of an explosive with inert gaps or a charge section of a cumulative action in the explosive destruction of rocks with contact zones. The influence of parameters of explosive destruction of mining blocks of complex geological structure on the formation of technological complexes of ore beneficiation in quarries is established. The dependence of the factor of stability of slopes of slopes during excavation of rocks, depending on the geological parameters. Scientific novelty. The regularities of changes in the parameters of the ore mass flow (medium piece and oversize) are established depending on the diameter of the drilling-blast wells, which allows you to adjust the particle size distribution. Practical significance. Based on the established patterns and improvement of the design of well charges, their influence on the quality of the blown-up rock mass in the ledges of a complex geological structure has been substantiated, which makes it possible to form the corresponding technological complexes of ore dressing in quarries. The result is a significant increase in the productivity of the technological equipment of the mining enterprise and the profitability of iron ore mining. Key words: quarry, ledge, complex geological structure, downhole charge structures, particle size distribution.

scholarly journals Productivity Criteria for Complex Reservoirs Based on the Study of Deep-Adsorbed Gases

2021 ◽  
Vol 133 (2) ◽  
pp. 27-30
Author(s):  
D. A. Kobylinskiy ◽  
Keyword(s):  
Research Method ◽  
Oil And Gas ◽  
Geological Structure ◽  
Core Material ◽  
Test Results ◽  
The West ◽  
Gas Field ◽  
The Core ◽  
Oil And Gas Field ◽  
Complex Geological Structure

The work is devoted to the development of geochemical criteria for determining the nature of saturation for deep-adsorbed gases in the core. As the object of investigation used the core material selected in the fields in the Nadym-Pyrskoy oil and gas field. In each sample, 72 components were determined, namely, hydrocarbons of different material groups: normal, branched, polycyclic, and aromatic compounds from butane to dodecane. With respect to the quantitative distribution and correlation among the components, qualitative geochemical indicators of sediment productivity have been developed. The saturation character established by the criteria of deep-adsorbed gases was confirmed by the test results. In this regard, this research method significantly increases the effectiveness of diagnostics of prospective deposits, the application of which is relevant in the territory of the West Siberian oil and gas basin, especially when studying deep-submerged deposits of complex geological structure.

Sign in / Sign up

Export Citation Format

Share Document