scholarly journals Experimental analysis of energy absorption behaviour of Al-tube filled with pumice lightweight concrete under axial loading condition

2017 ◽  
Vol 225 ◽  
pp. 012032
Author(s):  
D K Rajak ◽  
P G Deshpande ◽  
L A Kumaraswamidhas
Keyword(s):  
Energy Absorption ◽  
Experimental Analysis ◽  
Loading Condition ◽  
Lightweight Concrete ◽  
Axial Loading

Energy absorption of thin-walled circular tubes with gradient thickness under oblique loads

2020 ◽  
Vol 234 (16) ◽  
pp. 3207-3220 ◽  
Author(s):  
Peng Wang ◽  
Yuan Zhang ◽  
Fan Yang ◽  
Kun Tian ◽  
Qi Zhao ◽  
...  
Keyword(s):  
Finite Element ◽  
Energy Absorption ◽  
Loading Condition ◽  
Axial Loading ◽  
Deformation Mode ◽  
Circular Tubes ◽  
Oblique Loading ◽  
Nonuniform Thickness ◽  
Absorption Performance ◽  
Thin Walled

Introducing nonuniform thickness has shown promising potential in enhancing the energy absorption of thin-walled tubes. However, existing studies were focused on the axial loading, with little attention being paid to the oblique loading condition. In this paper, the energy absorption performance and the deformation modes of the circular tubes with gradient thicknesses under oblique loads are investigated. Finite element simulations and experiments were carried out for both uniform-thick and gradient-thick tubes under the axial and oblique loads, and satisfactory agreement was achieved betweent the numerical and the experimental results. The validated finite element models were used to investigate the effects of the thickness gradient and loading angle on the deforamtion modes and the energy absorption. The results highlight the advantages of the gradient-thickness tubes in improving the energy absorption performance under the oblique loading condition, especially at a larger loading angle. A novel progressive bending deformation mode was observed for the tube with large thickness gradient at a loading angle larger than 15°, which is beneficial for the energy absorption performance.

Crush Response of Polyurethane Foam-Filled Aluminium Tube Subjected to Axial Loading

2014 ◽  
Vol 875-877 ◽  
pp. 534-541 ◽  
Author(s):  
Chawalit Thinvongpituk ◽  
Nirut Onsalung
Keyword(s):  
Energy Absorption ◽  
Polyurethane Foam ◽  
Testing Machine ◽  
Axial Loading ◽  
Asymmetric Mode ◽  
Pu Foam ◽  
Universal Testing ◽  
Collapse Mode ◽  
Empty Tube ◽  
Foam Filled

In this paper, the experimental investigation of polyurethane (PU) foam-filled into circular aluminum tubes subjected to axial crushing was presented. The purpose of this study is to improve the energy absorption of aluminium tube under axial quasi-static load. The aluminium tube was made from the AA6063-T5 aluminium alloy tubes. Each tube was filled with polyurethane foam. The density of foam was varied from 100, 150 and 200 kg/mP3P including with empty tube. The range of diameter/thickness (D/t) ratio of tube was varied from 15-55. The specimen were tested by quasi-static axial load with crush speed of 50 mm/min using the 2,000 kN universal testing machine. The load-displacement curves while testing were recorded for calculation. The mode of collapse of each specimen was analyzed concerning on foam density and the influence of D/t ratio. The results revealed that the tube with foam-filled provided significantly increment of the energy absorption than that of the empty tube. While the density of foam and D/t ratios increase, the tendency of collapse mode is transformed from asymmetric mode to concertina mode.

Attempts to improve energy absorption characteristics of circular metal tubes subjected to axial loading

2010 ◽  
Vol 48 (6) ◽  
pp. 379-390 ◽  
Author(s):  
S. Salehghaffari ◽  
M. Tajdari ◽  
M. Panahi ◽  
F. Mokhtarnezhad
Keyword(s):  
Energy Absorption ◽  
Axial Loading ◽  
Absorption Characteristics

Effect of polymer foam anisotropy on energy absorption during combined shear-compression loading

2017 ◽  
Vol 54 (3) ◽  
pp. 597-613 ◽  
Author(s):  
Yasmine Mosleh ◽  
Kelly Vanden Bosche ◽  
Bart Depreitere ◽  
Jos Vander Sloten ◽  
Ignaas Verpoest ◽  
...  
Keyword(s):  
Energy Absorption ◽  
Transverse Shear ◽  
Axial Loading ◽  
Expanded Polystyrene ◽  
Polystyrene Foam ◽  
Polymer Foam ◽  
Expanded Polystyrene Foam ◽  
Shear Loads ◽  
Loading Direction ◽  
Compression Behaviour

Polymeric foams are extensively used in applications such as packaging, sports goods and sandwich structures. Since in-service loading conditions are often multi-axial, characterisation of foams under multi-axial loading is essential. In this article, quasi-static combined shear-compression behaviour of isotropic expanded polystyrene foam and anisotropic polyethersulfone foam was studied. For this, a testing apparatus which can apply combined compression and transverse shear loads was developed. The results revealed that the shear and compression energy absorption, yield stress and stiffness of foams are dependent on deformation angle. The total energy absorption of the anisotropic polyethersulfone foam is shown to be direction dependent in contrast to isotropic expanded polystyrene. Furthermore, for similar relative density, polyethersulfone foam absorbs more energy than expanded polystyrene foam, regardless of deformation angle. This study highlights the importance of correct positioning of foam cells in anisotropic foams with respect to loading direction to maximise energy absorption capability.

Experimental Analysis of Aluminum Alloy Section Bars and their Mortise and Tenon Joints under Bending Load

2011 ◽  
Vol 415-417 ◽  
pp. 2338-2344
Author(s):  
Xin Shen Huang ◽  
Qun Gao ◽  
Zhi Jian Zong
Keyword(s):  
Mechanical Properties ◽  
Aluminum Alloy ◽  
Energy Absorption ◽  
Experimental Analysis ◽  
Absorption Capacity ◽  
Main Section ◽  
Bending Properties ◽  
Energy Absorption Capacity ◽  
Bending Load ◽  
Mortise And Tenon

Different laid modes of aluminum alloy section bars and their mortise and tenon joints were bending tested, and their mechanical properties were compared, in order to research on the influence that forming a mortise and tenon joint brought to the original bars. Opening a hole laterally and inserting another shorter bar in the hole changed the bending properties and energy absorption capacity of the original bar. In horizontal laid mode, the mortise and tenon joint was weaker than the original bar when bearing bending load, but it was stronger in vertical laid mode. Weld beads of the mortise and tenon joints were strong enough to maintain the structure integrality before the main section bars were destroyed by load.

Sign in / Sign up

Export Citation Format

Share Document