scholarly journals Analysis on effect of using different tool pin profile and mechanical properties by friction stir welding on dissimilar aluminium alloys Al6061 and Al7075

2018 ◽  
Vol 402 ◽  
pp. 012099
Author(s):  
M Krishna ◽  
K C Udaiyakumar ◽  
D K Mohan Kumar ◽  
H Mohammed Ali
Keyword(s):  
Mechanical Properties ◽  
Friction Stir Welding ◽  
Aluminium Alloys ◽  
Friction Stir ◽  
Tool Pin Profile ◽  
Tool Pin

Effect of Tool pin Profile and Axial Force on Tensile Behavior in Friction Stir Welding of Dissimilar Aluminum Alloys

2011 ◽  
Vol 415-417 ◽  
pp. 1140-1146 ◽  
Author(s):  
R. Palanivel ◽  
P. Koshy Mathews ◽  
M. Balakrishnan ◽  
I. Dinaharan ◽  
N. Murugan
Keyword(s):  
Tensile Strength ◽  
Friction Stir Welding ◽  
Axial Force ◽  
Aluminium Alloys ◽  
Welding Process ◽  
Fusion Welding ◽  
Friction Stir ◽  
Tool Pin Profile ◽  
Dissimilar Aluminum Alloys ◽  
Tool Pin

Aluminium alloys generally has low weldability by traditional fusion welding process. The development of the Friction Stir Welding (FSW) has provided an alternative improved way of producing aluminium joints, in a faster and reliable manner. FSW process has several advantages, in particular the possibility to weld dissimilar aluminium alloys. This study focuses on the behavior of tensile strength of dissimilar joints of AA6351-T6 alloy to AA5083-H111 alloy produced by friction stir welding was analysed. Five different tool pin profile such as Straight Square (SS), Tapered Square (TS), Straight Hexagon (SH), Straight Octagon (SO) and Tapered Octagon (TO) with three different axial force (1tonne, 1.5tonne, 2 tonne) have been used to weld the joints. The effect of pin profiles and axial force on tensile properties and material flow behaviour of the joint was analyzed and it was found that the straight square pin profile with 1.5 tonne produced better tensile strength then other tool pin profile and axial force.

Effects of friction stir welding on corrosion and mechanical properties of AA6063 in sea water

2021 ◽  
pp. 095440622199554
Author(s):  
Laxmana Raju Salavaravu ◽  
Lingaraju Dumpala
Keyword(s):  
Mechanical Properties ◽  
Electron Microscope ◽  
Friction Stir Welding ◽  
Corrosion Rate ◽  
Rotational Speed ◽  
Traverse Speed ◽  
Tool Rotational Speed ◽  
Friction Stir ◽  
Tool Pin Profile ◽  
Tool Pin

Submerged friction stir welding (FSW) is used to improve the weld zones mechanical properties in the present study. This research aims to obtain the optimized process parameters used to fabricate the AA6063 Submerged FSW joint. In the Submerged FSW process, the most important influential factors are tool rotational speed, traverse speed, and pin profile in a seawater environment. The different workpieces are friction stir welded while submerged in seawater at different tool rotational speeds, traverse speeds, and tool pin profiles such as square pin, cylindrical taper pin, and threaded pin. The produced weldments were tested for the mechanical properties of higher tensile strength, microhardness, corrosion rate, and the microstructure of weldments was characterized by using a scanning electron microscope, transmission electron microscope, and X-ray diffractometer. The corrosion rate is investigated by using an electrochemical analyzer by potential dynamic polarization open-circuit technique. For this investigation, The Taguchi method with the L9 orthogonal array design of experimentation is adopted. The maximum UTS was acquired in the weld joint fabricated with 1250 r/min of tool rotational speed, 45 mm/min traverse speed, and a square tool pin. The stirred zone is tested for microhardness. High hardness is achieved with high tool rotational speed and low traverse speed with a square tool pin profile. The corrosion rate is also decreased with high tool rotational speed, low traverse speed, and a square tool pin profile.

scholarly journals Effect of Tool Geometry and Welding Speed on Mechanical Properties and Microstructure of Friction Stir Welded Joints of Aluminium Alloys AA6082-T6

2014 ◽  
Vol 61 (3) ◽  
pp. 455-468
Author(s):  
Hiralal Subhash Patil ◽  
Sanjay N. Soman
Keyword(s):  
Mechanical Properties ◽  
Welding Speed ◽  
Welded Joints ◽  
Aluminium Alloys ◽  
Tensile Tests ◽  
Tool Geometry ◽  
Welding Parameters ◽  
Friction Stir ◽  
Tool Pin Profile ◽  
Tool Pin

Abstract Friction stir welding is a solid state innovative joining technique, widely being used for joining aluminium alloys in aerospace, marine automotive and many other applications of commercial importance. The welding parameters and tool pin profile play a major role in deciding the weld quality. In this paper, an attempt has been made to understand the influences of welding speed and pin profile of the tool on friction stir welded joints of AA6082-T6 alloy. Three different tool pin profiles (tapered cylindrical four flutes, triangular and hexagonal) have been used to fabricate the joints at different welding speeds in the range of 30 to 74 mm/min. Microhardness (HV) and tensile tests performed at room temperature were used to evaluate the mechanical properties of the joints. In order to analyse the microstructural evolution of the material, the weld’s cross-sections were observed optically and SEM observations were made of the fracture surfaces. From this investigation it is found that the hexagonal tool pin profile produces mechanically sound and metallurgically defect free welds compared to other tool pin profiles.

Effect of friction stir welding tool profiles on mechanical properties of dissimilar welded aluminum alloy plates

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Bhanodaya Kiran Babu Nadikudi
Keyword(s):  
Mechanical Properties ◽  
Friction Stir Welding ◽  
Aluminium Alloy ◽  
Tensile Properties ◽  
Aluminium Alloys ◽  
Testing Machine ◽  
Weld Zone ◽  
Content Type ◽  
Friction Stir ◽  
Tool Pin

PurposeThe main purpose of the present work is to study the effect of tool pin profiles on mechanical properties of welded plates made with two different aluminium alloy plates.Design/methodology/approachThe welded plates were fabricated with the three different kinds of pin profiled tools such as taper cylindrical, taper threaded cylindrical and stepped cylindrical pin profiles. Tensile properties of welded plates were evaluated using tensile testing machine at room temperature. Microstructures studies were carried out using scanning electron microscope.FindingsTensile properties were improved with the use of taper threaded cylindrical pin tool in friction stir welding process when compared with taper cylindrical and stepped cylindrical pin tools. This is due to refinement of grains and mixing of plasticized material occurred with generation of sufficient heat with the taper threaded pin tool. Through these studies, it was confirmed that friction stir welding can be used to weld Al6061 and Al2014 aluminium alloy plates.Research limitations/implicationsIn the present study, the friction stir welding is performed with constant process parameters such as tool rotational speed of 900 rpm, transverse speed of 24 mm/min and tilt angle of 1°.Practical implicationsAluminium alloys are widely using in automotive and aerospace industries due to holding a high strength to weight property. These aluminium alloy blanks can be developed with friction stir welding method with better properties.Originality/valueVery limited work had been carried out on friction stir welding of aluminium alloys of Al 6061 and Al2014 with different tool pin profiles. Furthermore, this work analyzed with tensile properties of welded plates correlated with weld zone microstructures.

Optimization of friction stir welding parameters of dissimilar aluminium alloys 6061 and 5083 by using response surface methodology

2021 ◽  
pp. 095440622110058
Author(s):  
Sanjeev Verma ◽  
Vinod Kumar
Keyword(s):  
Tensile Strength ◽  
Friction Stir Welding ◽  
Tilt Angle ◽  
Feed Rate ◽  
Aluminium Alloys ◽  
Welded Joint ◽  
Welding Parameters ◽  
Friction Stir ◽  
Industrial Sectors ◽  
Tool Pin

Aluminium and its alloys are lightweight, corrosion-resistant, affordable and high-strength material and find wide applications in shipbuilding, automotive, constructions, aerospace and other industrial sectors. In applications like aerospace, marine and automotive industries, there is a need to join components made of different aluminium alloys, viz. AA6061 and AA5083. In this study friction stir welding (FSW) is used to join dissimilar plates made of AA6061-T6 and AA5083-O. The effect of varying tool pin profile, tool rotation speed, tool feed rate and tilt angle of the tool has been investigated on the tensile strength and percentage elongation of the welded joints. Box-Behkan design, with four input parameters and three levels of each parameter has been employed to decide the set of experimental runs. The regression models have been developed to investigate the influence of welding variables on the tensile strength and elongation of the welded joint. It is revealed that with the increase in welding parameters like tool rpm, tool feed rate and tilt angle of the tool, both the mechanical properties increase, reach a maximum level, followed by a decrease with further increase in the value of parameters. Amongst different types of tool pin profiles used, the FSW tool having straight cylindrical (SC) pin profile is found to yield the maximum strength and elongation of the welded joint for different combinations of welding parameters. Multiple response optimization indicates that the maximum UTS (135.83 MPa) and TE (4.35%) are obtained for the welded joint fabricated using FSW tool having SC pin profile, tilted at 1.11° and operating at tool speed and feed rate of 1568 rpm and 39.53 mm/min., respectively.

The Use of Bobbin Tools for Friction Stir Welding of Aluminium Alloys

2010 ◽  
Vol 638-642 ◽  
pp. 1179-1184 ◽  
Author(s):  
Philip L. Threadgill ◽  
M.M.Z. Ahmed ◽  
Jonathan P. Martin ◽  
Jonathan G. Perrett ◽  
Bradley P. Wynne
Keyword(s):  
Mechanical Properties ◽  
Grain Size ◽  
Friction Stir Welding ◽  
Cross Section ◽  
Axial Force ◽  
Aluminium Alloys ◽  
Processing Parameters ◽  
Machine Design ◽  
Friction Stir ◽  
Triangular Zone

The use of a double sided friction stir welding tool (known as a bobbin tool) has the advantage of giving a processed zone in the workpiece which is more or less rectangular in cross section, as opposed the triangular zone which is more typically found when conventional friction stir welding tool designs are used. In addition, the net axial force on the workpiece is almost zero, which has significant beneficial implications in machine design and cost. However, the response of these tools in generating fine microstructures in the nugget area has not been established. The paper presents detailed metallographic analyses of microstructures produced in 25mm AA6082-T6 aluminium wrought alloy, and examines grain size, texture and mechanical properties as a function of processing parameters and tool design, and offers comparison with data from welds made with conventional tools.

Sign in / Sign up

Export Citation Format

Share Document