scholarly journals Production of a bioadsorbent from oil palm kernel shell, and application for pollutants and colour removal in palm oil mill effluent final discharge

2020 ◽  
Vol 736 ◽  
pp. 022045
Author(s):  
Z. Nahrul Hayawin ◽  
M. F. Ibrahim ◽  
H. Kamarudin ◽  
J. Norfaizah ◽  
M. Ropandi ◽  
...  
Keyword(s):  
Palm Oil ◽  
Oil Palm ◽  
Palm Kernel ◽  
Palm Oil Mill Effluent ◽  
Colour Removal ◽  
Palm Kernel Shell ◽  
Palm Oil Mill

Application of Palm Kernel Shell Activated Carbon for the Removal of Pollutant and Color in Palm Oil Mill Effluent Treatment

2016 ◽  
Vol 2 (1) ◽  
pp. 15 ◽  
Author(s):  
NorFaizah Jalani ◽  
AstimarAbdul Aziz ◽  
NoorshamsianaAbdul Wahab ◽  
WanHasamudin Wan Hassan ◽  
NahrulHayawin Zainal
Keyword(s):  
Activated Carbon ◽  
Palm Oil ◽  
Palm Kernel ◽  
Effluent Treatment ◽  
Palm Oil Mill Effluent ◽  
Palm Kernel Shell ◽  
Palm Oil Mill

Effect of Regenerated Cellulose of Ultrafiltration Membranes on POME Treatment

2014 ◽  
Vol 70 (2) ◽  
Author(s):  
Nazatul Shima Azmi ◽  
Khairul Faezah Md. Yunos
Keyword(s):  
Palm Oil ◽  
Palm Kernel ◽  
Solid Particles ◽  
Palm Oil Mill Effluent ◽  
Regenerated Cellulose ◽  
Permeate Flux ◽  
Solution Ph ◽  
Palm Kernel Shell ◽  
Palm Oil Mill ◽  
Adsorption Treatment

Palm oil mill effluent (POME) in palm oil industry has become a big issue of environmental pollution to be solved urgently and critically. This wastewater consists of water, oil, and natural sediments. Hence, in this study, the work was carried out to investigate ultrafiltration process feasibility for treating palm oil mill effluent. Palm kernel shell bioactivated carbon (PKS-AC) adsorbent was used in adsorption treatment (pre-treatment) was used to reduced solid particles in POME. For adsorption treatment, POME was stirred with 0.20 g/L of PKS-AC at 39.94 minute and sediment for one hour. Membrane separation was subsequently applied to further treat the pre-treated POME. In this study, the permeate flux was found to be dependent to pressure applied, solution pH and stirring speed. An optium conditions was achieved at pressure 2 bar, with solution pH 8 using stirring speed 600 rpm. Considerable amount of POME pollutant is also reduced by used membrane for TS, DS, SS, BOD5, COD and turbidity were 625.32 mg/L, 445.32 mg/L, 180 mg/L, 1296 mg/L, 541.76 mg/L, and 16.20 NTU respectively. Thus, this result show that the pollutant in POME was reduced significantly using this technique.

THE EFFECT OF OIL PALM KERNEL SHELL IN PRODUCING DIFFERENT TYPES OF POFA BASED MORTAR

2015 ◽  
Vol 77 (12) ◽  
Author(s):  
Nor Hasanah Abdul Shukor Lim ◽  
Mohd Warid Hussin ◽  
Abdul Rahman Mohd. Sam ◽  
Mostafa Samadi ◽  
Mohamed A. Ismail ◽  
...  
Keyword(s):  
Palm Oil ◽  
Oil Palm ◽  
Palm Kernel ◽  
High Volume ◽  
Strength Development ◽  
Palm Oil Fuel Ash ◽  
Palm Kernel Shell ◽  
Fuel Ash ◽  
Different Types ◽  
Oil Fuel

This paper presents the utilization of palm oil fuel ash and oil palm kernel shell as cement and sand replacement, respectively in the production of palm oil fuel ash based mortar mixes as part of new and innovative materials in the construction industry. The study includes basic properties such as water absorption, density, compressive strength, and microstructure test with regards to variations in the mix design process. In order to get better performance in terms of strength development, the ash used was subjected to heat treatment and grounded to the size of less than 2 µm. High volume of 80% palm oil fuel ash was used as cement replacement, while 25%, 50%, 75%, and 100% of oil palm kernel shell was used as sand replacement. The results indicated that the density of the mortar decreases with increasing volume of oil palm kernel ash as sand replacement. Three different types of mortar were produced with different percentages of oil palm kernel shell, which was high strength, medium strength, and low strength lightweight mortars.

scholarly journals Pengembangan Potensi Energi Alternatif Dengan Pemanfaatan Limbah Cair Kelapa Sawit Sebagai Sumber Energi Baru Terbarukan Di Kabupaten Kotawaringin Timur

2016 ◽  
Vol 14 (2) ◽  
pp. 96 ◽  
Author(s):  
Yulian Mara Alkusma ◽  
Hermawan Hermawan ◽  
H Hadiyanto
Keyword(s):  
Renewable Energy ◽  
Chemical Oxygen Demand ◽  
Palm Oil ◽  
Oil Palm ◽  
Liquid Waste ◽  
Oxygen Demand ◽  
Electrical Energy ◽  
Palm Oil Mill Effluent ◽  
Environmental Disaster ◽  
Palm Oil Mill

ABSTRAKEnergi  memiliki  peranan penting dalam proses pembangunan yang pada akhirnya untuk mencapai tujuan sosial,  ekonomi  dan  lingkungan  untuk  serta  merupakan  pendukung bagi kegiatan  ekonomi  nasional. Sumber energi terbarukan yang berasal dari pemanfaatan biogas limbah cair kelapa sawit dapat menghasilkan energi listrik yang saat ini banyak bergantung pada generator diesel dengan biaya yang mahal.Limbah cair kelapa sawit (Palm Oil Mill Effluent atau POME) adalah limbah cair yang berminyak dan tidak beracun, berasal dari proses pengolahan minyak kelapa sawit, namun limbah cair tersebut dapat menyebabkan bencana lingkungan apabila tidak dimanfaatkan dan dibuang di kolam terbuka karena akan melepaskan sejumlah besar gas metana dan gas berbahaya lainnya ke udara yang menyebabkan terjadinya emisi gas rumah kaca. Tingginya kandungan Chemical Oxygen Demand (COD) sebesar 50.000-70.000 mg/l dalam limbah cair kelapa sawit memberikan potensi untuk dapat di konversi menjadi listrik dengan menangkap biogas (gas metana) yang dihasilkan melalui serangkaian tahapan proses pemurnian. Di Kabupaten Kotawaringin Timur terdapat 36 Pabrik Pengolahan Kelapa Sawit yang total kapasitas pabriknya adalah sebesar 2.115 TBS/jam, menghasilkan limbah cair sebesar 1.269 ton limbah cari/jam dan mampu menghasilkan 42.300 m3 biogas.Kata kunci:  Renewable Energy, Plam Oil Mill Effluent, Chemical Oxygen Demand, Biogass, Methane. ABSTRACTEnergy has an important role in the development process and ultimately to achieve the objectives of social, economic and environment for as well as an environmental support for national economic activity. Renewable energy source derived from wastewater biogas utilization of oil palm can produce electrical energy which is currently heavily dependent on diesel generators at a cost that mahal.Limbah liquid palm oil (Palm Oil Mill Effluent, or POME) is the wastewater that is greasy and non-toxic, derived from the processing of palm oil, but the liquid waste could cause environmental disaster if not used and disposed of in open ponds because it will release large amounts of methane and other harmful gases into the air that cause greenhouse gas emissions. The high content of Chemical Oxygen Demand (COD) of 50000-70000 mg / l in the liquid waste palm oil provides the potential to be converted into electricity by capturing the biogas (methane gas) produced through a series of stages of the purification process. In East Kotawaringin there are 36 palm oil processing factory that total factory capacity is of 2,115 TBS / hour, producing 1,269 tons of liquid waste wastewater / h and is capable of producing 42,300 m3 of biogas.Keywords:  Renewable Energy, Plam Oil Mill Effluent, Chemical Oxygen Demand, Biogass, MethaneCara sitasi: Alkusma, Y.M., Hermawan, dan Hadiyanto. (2016). Pengembangan Potensi Energi Alternatif dengan Pemanfaatan Limbah Cair Kelapa Sawit sebagai Sumber Energi Baru Terbarukan di Kabupaten Kotawaringin Timur. Jurnal Ilmu Lingkungan,14(2),96-102, doi:10.14710/jil.14.2.96-102

Sign in / Sign up

Export Citation Format

Share Document