Anti-balling Mechanism on the Non-smooth Surface of Bionic Polycrystalline diamond compact Drill Bits

2021 ◽  
Author(s):  
kuilin huang ◽  
Yingxin Yang ◽  
Gao Li ◽  
Yan Yang ◽  
Lizhe Zeng ◽  
...  
Keyword(s):  
Smooth Surface ◽  
Polycrystalline Diamond ◽  
Drill Bits ◽  
Polycrystalline Diamond Compact

Wear Characteristics of Polycrystalline Diamond Compact Drill Bits in Small Diameter Rock Drilling

1985 ◽  
Vol 107 (4) ◽  
pp. 534-542 ◽  
Author(s):  
C. L. Hough ◽  
B. Das
Keyword(s):  
Small Diameter ◽  
Polycrystalline Diamond ◽  
Wear Test ◽  
Test Results ◽  
Failure Characteristics ◽  
Wear Characteristics ◽  
Drill Bits ◽  
Rotary Speed ◽  
Polycrystalline Diamond Compact ◽  
Single Material

The wear characteristics of polycrystalline diamond compact (PDC) drill bits were investigated in the context of drilling small holes in a hard abrasive medium. An efficient method for measuring wear of the PDC drill bits was developed. The wear test results were grouped or categorized in terms of rotary speed, feed and wear or failure characteristics. Contrary to the three classical wear phases (break-in, uniform wear and rapid breakdown) of the single material cutters, four distinctive wear phases were formed for the PDC cutters: I–break-in, II–diamond wear, III–carbide wear, and IV–rapid breakdown. The characteristics of the wear phases were identified and some suggestions were made to alleviate the wear problem.

Life Models for Small-Diameter Polycrystalline Diamond Compact Bits in Hard Abrasive Media

1986 ◽  
Vol 108 (4) ◽  
pp. 310-314
Author(s):  
C. L. Hough ◽  
B. Das ◽  
T. G. Rozgonyi
Keyword(s):  
Cutting Speed ◽  
Small Diameter ◽  
Polycrystalline Diamond ◽  
Prediction Equation ◽  
Logarithmic Model ◽  
Drill Bits ◽  
Rate Versus ◽  
Rotary Speed ◽  
Bit Life ◽  
Polycrystalline Diamond Compact

Mathematical models for bit life of polycrystalline diamond compact (PDC) drill bits were developed for drilling small holes in hard abrasive media. Based on the wear-out criterion of an average 0.060 in. (1.5 mm) flank wear land, bit life equations were formulated in three forms: bit life versus rotary speed and feed rate, bit life versus rotary speed and penetration rate, and wear rate versus cutting speed and cutter engagement area. The traditional linear-logarithmic model proved inadequate to describe bit life, whereas the quadratic-logarithmic model provided the best bit life prediction equation. Consequently, it would be possible to predict the optimum economical drilling conditions more accurately by employing a quadratic-logarithmic based bit life equation. The equation demonstrated the ability to predict the bit life precisely under different modes of wear.

scholarly journals Application of an innovative ridge-ladder-shaped polycrystalline diamond compact cutter to reduce vibration and improve drilling speed

2020 ◽  
Vol 103 (3) ◽  
pp. 003685042093097
Author(s):  
Dou Xie ◽  
Zhiqiang Huang ◽  
Yuqi Yan ◽  
Yachao Ma ◽  
Yuan Yuan
Keyword(s):  
Oil And Gas ◽  
Polycrystalline Diamond ◽  
Rock Breaking ◽  
Drilling Process ◽  
Drilling Speed ◽  
Stick Slip ◽  
Gas Drilling ◽  
Drill Bits ◽  
Element Simulation ◽  
Polycrystalline Diamond Compact

Polycrystalline diamond compact bits have been widely used in the Oil and Gas drilling industry, despite the fact that they may introduce undesired vibration into the drilling process, for example, stick-slip and bit bounce, which accelerate the failure rate and lead to higher drilling costs. First, we develop an innovative ridge-ladder-shaped polycrystalline diamond compact cutter, which has ridge-shaped cutting faces and multiple cutting edges with stepped distribution, in the hope of reducing vibration and improving drilling speed. Then, the scrape tests of ridge-ladder-shaped and general polycrystalline diamond compact cutters are carried out in a laboratory, indicating that the cutting, lateral, and longitudinal forces on ridge-ladder-shaped polycrystalline diamond compact cutters are smaller and with minor fluctuations. Due to different rock-breaking mechanisms, ridge-ladder-shaped polycrystalline diamond compact cutters have higher cutting efficiency compared to general polycrystalline diamond compact cutters, which is also verified experimentally. Finally, the drilling characteristics of a new polycrystalline diamond compact bit fitted with some ridge-ladder-shaped polycrystalline diamond compact cutters are compared to those of a general polycrystalline diamond compact bit by means of finite element simulation. The results show that introducing ridge-ladder-shaped polycrystalline diamond compact cutters can not only reduce the stick-slip vibration, bit bounce, and backward rotation of drill bits effectively, but also improve their rate of penetration.

Dynamical Analysis of Drill Bit With Ultrasonic Vibration

2015 ◽  
Author(s):  
Dapeng Zhao ◽  
Sigbjørn Sangesland
Keyword(s):  
Ultrasonic Vibration ◽  
Reaction Force ◽  
Polycrystalline Diamond ◽  
Dynamical Analysis ◽  
Contact Friction ◽  
Rock Interaction ◽  
Drill Bits ◽  
Mass Spring Model ◽  
Mass Spring ◽  
Polycrystalline Diamond Compact

Based on the bit-rock interaction laws, a simple nonlinear 2-dofs mass-spring model is developed to analyze the dynamic cutting process with normal ultrasonic vibration excitation. The study presents a single cutter used in Polycrystalline-Diamond-Compact (PDC) drill bits. Using the 4th Runge-Kutta’s algorithm, numerical simulation found that ultrasonic vibration-induced contact deflection and even loss of contact. The contact friction between the rock and wear-flat (wear surface), which relates to the reaction force, is therefore reduced. This will reduce the wear on the cutter and the force needed to cut the rock. This indicates that the average reduction of friction induced by ultrasonic vibration can be explained by decreasing the average normal force on the cutter-rock wear-flat, rather than changing the friction coefficient.

scholarly journals ELECTRICALLY CONDUCTIVE POLYCRYSTALLINE SUPER HARD MATERIAL BASED ON DIAMOND AND n-LAYER GRAPHENES

2018 ◽  
Vol 59 (8) ◽  
pp. 69
Author(s):  
Alexandr A. Shul’zhenko ◽  
Lucyna Jaworska ◽  
Alexandr N. Sokolov ◽  
Vladislav G. Gargin ◽  
Ludmila A. Romanko
Keyword(s):  
Physical Properties ◽  
High Pressures ◽  
Polycrystalline Diamond ◽  
Sharp Decrease ◽  
Hard Material ◽  
Electrically Conductive ◽  
High Pressures And Temperatures ◽  
Polycrystalline Diamond Compact

The electrical and physical properties of the electrically conductive super hard material on the basis of polycrystalline diamond and n-layered graphenes obtained at high pressures and temperatures were studied. It was established that the increase in graphene in a polycrystalline diamond compact leads to a sharp decrease in resistance. Wherein the hardness of the samples is slightly inferior to the hardness of diamond poly crystals obtained without the use of graphene.

Sign in / Sign up

Export Citation Format

Share Document