scholarly journals Kar9p-independent Microtubule Capture at Bud6p Cortical Sites Primes Spindle Polarity before Bud Emergence in Saccharomyces cerevisiae

2002 ◽  
Vol 13 (12) ◽  
pp. 4141-4155 ◽  
Author(s):  
Marisa Segal ◽  
Kerry Bloom ◽  
Steven I. Reed
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Live Cells ◽  
Spindle Orientation ◽  
Cell Cortex ◽  
Yeast Saccharomyces Cerevisiae ◽  
Chromosomal Segregation ◽  
Division Site ◽  
Bud Emergence ◽  
Mother Cells ◽  
Microtubule Capture

Spindle orientation is critical for accurate chromosomal segregation in eukaryotic cells. In the yeast Saccharomyces cerevisiae, orientation of the mitotic spindle is achieved by a program of microtubule–cortex interactions coupled to spindle morphogenesis. We previously implicated Bud6p in directing microtubule capture throughout this program. Herein, we have analyzed cells coexpressing GFP:Bud6 and GFP:Tub1 fusions, providing a kinetic view of Bud6p–microtubule interactions in live cells. Surprisingly, even during the G1 phase, microtubule capture at the recent division site and the incipient bud is dictated by Bud6p. These contacts are eliminated in bud6Δ cells but are proficient inkar9Δ cells. Thus, Bud6p cues microtubule capture, as soon as a new cell polarity axis is established independent of Kar9p. Bud6p increases the duration of interactions and promotes distinct modes of cortical association within the bud and neck regions. In particular, microtubule shrinkage and growth at the cortex rarely occur away from Bud6p sites. These are the interactions selectively impaired at the bud cortex in bud6Δ cells. Finally, interactions away from Bud6p sites within the bud differ from those occurring at the mother cell cortex, pointing to the existence of an independent factor controlling cortical contacts in mother cells after bud emergence.

scholarly journals Interactions among Rax1p, Rax2p, Bud8p, and Bud9p in Marking Cortical Sites for Bipolar Bud-site Selection in Yeast

2004 ◽  
Vol 15 (11) ◽  
pp. 5145-5157 ◽  
Author(s):  
Pil Jung Kang ◽  
Elizabeth Angerman ◽  
Kenichi Nakashima ◽  
John R. Pringle ◽  
Hay-Oak Park
Keyword(s):  
Cell Cortex ◽  
Type I ◽  
Yeast Saccharomyces Cerevisiae ◽  
Daughter Cells ◽  
Division Site ◽  
Distal Pole ◽  
Mother And Daughter ◽  
Mother Cells ◽  
Diploid Cells ◽  
Bud Site

In the budding yeast Saccharomyces cerevisiae, selection of the bud site determines the axis of polarized cell growth and eventual oriented cell division. Bud sites are selected in specific patterns depending on cell type. These patterns appear to depend on distinct types of marker proteins in the cell cortex; in particular, the bipolar budding of diploid cells depends on persistent landmarks at the birth-scar-distal and -proximal poles that involve the proteins Bud8p and Bud9p, respectively. Rax1p and Rax2p also appear to function specifically in bipolar budding, and we report here a further characterization of these proteins and of their interactions with Bud8p and Bud9p. Rax1p and Rax2p both appear to be integral membrane proteins. Although commonly used programs predict different topologies for Rax2p, glycosylation studies indicate that it has a type I orientation, with its long N-terminal domain in the extracytoplasmic space. Analysis of rax1 and rax2 mutant budding patterns indicates that both proteins are involved in selecting bud sites at both the distal and proximal poles of daughter cells as well as near previously used division sites on mother cells. Consistent with this, GFP-tagged Rax1p and Rax2p were both observed at the distal pole as well as at the division site on both mother and daughter cells; localization to the division sites was persistent through multiple cell cycles. Localization of Rax1p and Rax2p was interdependent, and biochemical studies showed that these proteins could be copurified from yeast. Bud8p and Bud9p could also be copurified with Rax1p, and localization studies provided further evidence of interactions. Localization of Rax1p and Rax2p to the bud tip and distal pole depended on Bud8p, and normal localization of Bud8p was partially dependent on Rax1p and Rax2p. Although localization of Rax1p and Rax2p to the division site did not appear to depend on Bud9p, normal localization of Bud9p appeared largely or entirely dependent on Rax1p and Rax2p. Taken together, the results indicate that Rax1p and Rax2p interact closely with each other and with Bud8p and Bud9p in the establishment and/or maintenance of the cortical landmarks for bipolar budding.

scholarly journals Patterns of bud-site selection in the yeast Saccharomyces cerevisiae.

1995 ◽  
Vol 129 (3) ◽  
pp. 751-765 ◽  
Author(s):  
J Chant ◽  
J R Pringle
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Time Lapse ◽  
Growth Conditions ◽  
Alpha Cells ◽  
Yeast Saccharomyces Cerevisiae ◽  
Cell Cycles ◽  
Daughter Cells ◽  
Division Site ◽  
Mother Cells ◽  
Bud Site

Cells of the yeast Saccharomyces cerevisiae select bud sites in either of two distinct spatial patterns, known as axial (expressed by a and alpha cells) and bipolar (expressed by a/alpha cells). Fluorescence, time-lapse, and scanning electron microscopy have been used to obtain more precise descriptions of these patterns. From these descriptions, we conclude that in the axial pattern, the new bud forms directly adjacent to the division site in daughter cells and directly adjacent to the immediately preceding division site (bud site) in mother cells, with little influence from earlier sites. Thus, the division site appears to be marked by a spatial signal(s) that specifies the location of the new bud site and is transient in that it only lasts from one budding event to the next. Consistent with this conclusion, starvation and refeeding of axially budding cells results in the formation of new buds at nonaxial sites. In contrast, in bipolar budding cells, both poles are specified persistently as potential bud sites, as shown by the observations that a pole remains competent for budding even after several generations of nonuse and that the poles continue to be used for budding after starvation and refeeding. It appears that the specification of the two poles as potential bud sites occurs before a daughter cell forms its first bud, as a daughter can form this bud near either pole. However, there is a bias towards use of the pole distal to the division site. The strength of this bias varies from strain to strain, is affected by growth conditions, and diminishes in successive cell cycles. The first bud that forms near the distal pole appears to form at the very tip of the cell, whereas the first bud that forms near the pole proximal to the original division site (as marked by the birth scar) is generally somewhat offset from the tip and adjacent to (or overlapping) the birth scar. Subsequent buds can form near either pole and appear almost always to be adjacent either to the birth scar or to a previous bud site. These observations suggest that the distal tip of the cell and each division site carry persistent signals that can direct the selection of a bud site in any subsequent cell cycle.

scholarly journals A Role for the Actin Cytoskeleton of Saccharomyces cerevisiae in Bipolar Bud-Site Selection

1997 ◽  
Vol 136 (1) ◽  
pp. 111-123 ◽  
Author(s):  
Shirley Yang ◽  
Kathryn R. Ayscough ◽  
David G. Drubin
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Actin Cytoskeleton ◽  
Site Selection ◽  
Mitotic Checkpoint ◽  
Cell Cortex ◽  
Spatial Cues ◽  
Genes Encoding ◽  
Mother And Daughter ◽  
Mother Cells ◽  
Bud Site

Saccharomyces cerevisiae cells select bud sites according to one of two predetermined patterns. MATa and MATα cells bud in an axial pattern, and MATa/α cells bud in a bipolar pattern. These budding patterns are thought to depend on the placement of spatial cues at specific sites in the cell cortex. Because cytoskeletal elements play a role in organizing the cytoplasm and establishing distinct plasma membrane domains, they are well suited for positioning bud-site selection cues. Indeed, the septin-containing neck filaments are crucial for establishing the axial budding pattern characteristic of MATa and MATα cells. In this study, we determined the budding patterns of cells carrying mutations in the actin gene or in genes encoding actin-associated proteins: MATa/α cells were defective in the bipolar budding pattern, but MATa and MATα cells still exhibit a normal axial budding pattern. We also observed that MATa/α actin cytoskeleton mutant daughter cells correctly position their first bud at the distal pole of the cell, but mother cells position their buds randomly. The actin cytoskeleton therefore functions in generation of the bipolar budding pattern and is required specifically for proper selection of bud sites in mother MATa/α cells. These observations and the results of double mutant studies support the conclusion that different rules govern bud-site selection in mother and daughter MATa/α cells. A defective bipolar budding pattern did not preclude an sla2-6 mutant from undergoing pseudohyphal growth, highlighting the central role of daughter cell bud-site selection cues in the formation of pseudohyphae. Finally, by examining the budding patterns of mad2-1 mitotic checkpoint mutants treated with benomyl to depolymerize their microtubules, we confirmed and extended previous evidence indicating that microtubules do not function in axial or bipolar bud-site selection.

scholarly journals Spindle dynamics and cell cycle regulation of dynein in the budding yeast, Saccharomyces cerevisiae.

1995 ◽  
Vol 130 (3) ◽  
pp. 687-700 ◽  
Author(s):  
E Yeh ◽  
R V Skibbens ◽  
J W Cheng ◽  
E D Salmon ◽  
K Bloom
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Nuclear Translocation ◽  
Spindle Pole ◽  
Cell Cortex ◽  
Wild Type ◽  
Immunofluorescent Localization ◽  
Yeast Saccharomyces Cerevisiae ◽  
Spindle Dynamics ◽  
Spindle Elongation ◽  
Anaphase B

We have used time-lapse digital- and video-enhanced differential interference contrast (DE-DIC, VE-DIC) microscopy to study the role of dynein in spindle and nuclear dynamics in the yeast Saccharomyces cerevisiae. The real-time analysis reveals six stages in the spindle cycle. Anaphase B onset appears marked by a rapid phase of spindle elongation, simultaneous with nuclear migration into the daughter cell. The onset and kinetics of rapid spindle elongation are identical in wild type and dynein mutants. In the absence of dynein the nucleus does not migrate as close to the neck as in wild-type cells and initial spindle elongation is confined primarily to the mother cell. Rapid oscillations of the elongating spindle between the mother and bud are observed in wild-type cells, followed by a slower growth phase until the spindle reaches its maximal length. This stage is protracted in the dynein mutants and devoid of oscillatory motion. Thus dynein is required for rapid penetration of the nucleus into the bud and anaphase B spindle dynamics. Genetic analysis reveals that in the absence of a functional central spindle (ndcl), dynein is essential for chromosome movement into the bud. Immunofluorescent localization of dynein-beta-galactosidase fusion proteins reveals that dynein is associated with spindle pole bodies and the cell cortex: with spindle pole body localization dependent on intact microtubules. A kinetic analysis of nuclear movement also revealed that cytokinesis is delayed until nuclear translocation is completed, indicative of a surveillance pathway monitoring nuclear transit into the bud.

scholarly journals Daughter cells of Saccharomyces cerevisiae from old mothers display a reduced life span.

1994 ◽  
Vol 127 (6) ◽  
pp. 1985-1993 ◽  
Author(s):  
B K Kennedy ◽  
N R Austriaco ◽  
L Guarente
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Life Span ◽  
Daughter Cell ◽  
Young Mothers ◽  
Young Mother ◽  
Yeast Saccharomyces Cerevisiae ◽  
Daughter Cells ◽  
Per Se ◽  
Mother Cells ◽  
Maximum Occurrence

The yeast Saccharomyces cerevisiae typically divides asymmetrically to give a large mother cell and a smaller daughter cell. As mother cells become old, they enlarge and produce daughter cells that are larger than daughters derived from young mother cells. We found that occasional daughter cells were indistinguishable in size from their mothers, giving rise to a symmetric division. The frequency of symmetric divisions became greater as mother cells aged and reached a maximum occurrence of 30% in mothers undergoing their last cell division. Symmetric divisions occurred similarly in rad9 and ste12 mutants. Strikingly, daughters from old mothers, whether they arose from symmetric divisions or not, displayed reduced life spans relative to daughters from young mothers. Because daughters from old mothers were larger than daughters from young mothers, we investigated whether an increased size per se shortened life span and found that it did not. These findings are consistent with a model for aging that invokes a senescence substance which accumulates in old mother cells and is inherited by their daughters.

scholarly journals Cell cycle phases in the unequal mother/daughter cell cycles of Saccharomyces cerevisiae.

1984 ◽  
Vol 4 (11) ◽  
pp. 2529-2531 ◽  
Author(s):  
B J Brewer ◽  
E Chlebowicz-Sledziewska ◽  
W L Fangman
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Cell Cycle ◽  
Cycle Phase ◽  
Cell Cycle Time ◽  
Yeast Saccharomyces Cerevisiae ◽  
Cell Cycles ◽  
Daughter Cells ◽  
Mother And Daughter ◽  
Cell Cycle Phases ◽  
Mother Cells

During cell division in the yeast Saccharomyces cerevisiae mother cells produce buds (daughter cells) which are smaller and have longer cell cycles. We performed experiments to compare the lengths of cell cycle phases in mothers and daughters. As anticipated from earlier indirect observations, the longer cell cycle time of daughter cells is accounted for by a longer G1 interval. The S-phase and the G2-phase are of the same duration in mother and daughter cells. An analysis of five isogenic strains shows that cell cycle phase lengths are independent of cell ploidy and mating type.

scholarly journals Cellular morphogenesis in the Saccharomyces cerevisiae cell cycle: localization of the CDC3 gene product and the timing of events at the budding site.

1991 ◽  
Vol 112 (4) ◽  
pp. 535-544 ◽  
Author(s):  
H B Kim ◽  
B K Haarer ◽  
J R Pringle
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Gene Product ◽  
Polyclonal Antibodies ◽  
Electron Microscopic ◽  
Yeast Saccharomyces Cerevisiae ◽  
Cell Biol ◽  
Bud Emergence ◽  
Ring Structures ◽  
Bud Growth ◽  
10 Nm Filaments

Budding cells of the yeast Saccharomyces cerevisiae possess a ring of 10-nm-diameter filaments, of unknown biochemical nature, that lies just inside the plasma membrane in the neck connecting the mother cell to its bud. Electron microscopic observations suggest that these filaments assemble at the budding site coincident with bud emergence and disassemble shortly before cytokinesis (Byers, B. and L. Goetsch. 1976. J. Cell Biol. 69:717-721). Mutants defective in any of four genes (CDC3, CDC10, CDC11, or CDC12) lack these filaments and display a pleiotropic phenotype that involves abnormal bud growth and an inability to complete cytokinesis. We showed previously by immunofluorescence that the CDC12 gene product is probably a constituent of the ring of 10-nm filaments (Haarer, B. and J. Pringle. 1987. Mol. Cell. Biol. 7:3678-3687). We now report the use of fusion proteins to generate polyclonal antibodies specific for the CDC3 gene product. In immunofluorescence experiments, these antibodies decorated the neck regions of wild-type and mutant cells in patterns suggesting that the CDC3 gene product is also a constituent of the ring of 10-nm filaments. We also used the CDC3-specific and CDC12-specific antibodies to investigate the timing of localization of these proteins to the budding site. The results suggest that the CDC3 protein is organized into a ring at the budding site well before bud emergence and remains so organized for some time after cytokinesis. The CDC12 product appears to behave similarly, but may arrive at the budding site closer to the time of bud emergence, and disappear from that site more quickly after cytokinesis, than does the CDC3 product. Examination of mating cells and cells responding to purified mating pheromone revealed novel arrangements of the CDC3 and CDC12 products in the regions of cell wall reorganization. Both proteins were present in normal-looking ring structures at the bases of the first zygotic buds.

scholarly journals Control of Mitotic Spindle Position by the Saccharomyces cerevisiae Formin Bni1p

1999 ◽  
Vol 144 (5) ◽  
pp. 947-961 ◽  
Author(s):  
Laifong Lee ◽  
Saskia K. Klee ◽  
Marie Evangelista ◽  
Charles Boone ◽  
David Pellman
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Mitotic Spindle ◽  
Cortical Microtubule ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Spindle Orientation ◽  
Cell Cortex ◽  
Cortical Actin ◽  
Bud Site ◽  
Spindle Position

Alignment of the mitotic spindle with the axis of cell division is an essential process in Saccharomyces cerevisiae that is mediated by interactions between cytoplasmic microtubules and the cell cortex. We found that a cortical protein, the yeast formin Bni1p, was required for spindle orientation. Two striking abnormalities were observed in bni1Δ cells. First, the initial movement of the spindle pole body (SPB) toward the emerging bud was defective. This phenotype is similar to that previously observed in cells lacking the kinesin Kip3p and, in fact, BNI1 and KIP3 were found to be in the same genetic pathway. Second, abnormal pulling interactions between microtubules and the cortex appeared to cause preanaphase spindles in bni1Δ cells to transit back and forth between the mother and the bud. We therefore propose that Bni1p may localize or alter the function of cortical microtubule-binding sites in the bud. Additionally, we present evidence that other bipolar bud site determinants together with cortical actin are also required for spindle orientation.

scholarly journals Role of astral microtubules and actin in spindle orientation and migration in the budding yeast, Saccharomyces cerevisiae.

1992 ◽  
Vol 119 (3) ◽  
pp. 583-593 ◽  
Author(s):  
R E Palmer ◽  
D S Sullivan ◽  
T Huffaker ◽  
D Koshland
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Chromosome Segregation ◽  
Mother Cell ◽  
Fold Increase ◽  
Spindle Pole ◽  
Spindle Orientation ◽  
Temperature Sensitive ◽  
Chromosome Movement ◽  
Yeast Saccharomyces Cerevisiae ◽  
Cytoskeletal Elements

In the yeast Saccharomyces cerevisiae, before the onset of anaphase, the spindle apparatus is always positioned with one spindle pole at, or through, the neck between the mother cell and the growing bud. This spindle orientation enables proper chromosome segregation to occur during anaphase, allowing one replicated genome to be segregated into the bud and the other to remain in the mother cell. In this study, we synchronized a population of cells before the onset of anaphase such that > 90% of the cells in the population had spindles with the correct orientation, and then disrupted specific cytoskeletal elements using temperature-sensitive mutations. Disruption of either the astral microtubules or actin function resulted in improper spindle orientation in approximately 40-50% of the cells. When cells with disrupted astral microtubules or actin function entered into anaphase, there was a 100-200-fold increase in the frequency of binucleated cell bodies. Thus, the maintenance of proper spindle orientation by these cytoskeletal elements was essential for proper chromosome segregation. These data are consistent with the model that proper spindle orientation is maintained by directly or indirectly tethering the astral microtubules to the actin cytoskeleton. After nuclear migration, but before anaphase, bulk chromosome movement occurs within the nucleus apparently because the chromosomes are attached to a mobile spindle. The frequency and magnitude of bulk chromosome movement is greatly diminished by disruption of the astral microtubules but not by disruption of the nonkinetochore spindle microtubules. These results suggest that astral microtubules are not only important for spindle orientation before anaphase, but they also mediate force on the spindle, generating spindle displacement and in turn chromosome movement. Potential roles for this force in spindle assembly and orientation are discussed.

scholarly journals Genetic analysis of the bipolar pattern of bud site selection in the yeast Saccharomyces cerevisiae.

1996 ◽  
Vol 16 (4) ◽  
pp. 1857-1870 ◽  
Author(s):  
J E Zahner ◽  
H A Harkins ◽  
J R Pringle
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Genetic Interaction ◽  
Previous Analysis ◽  
Intracellular Localization ◽  
Proximal Pole ◽  
Yeast Saccharomyces Cerevisiae ◽  
Novel Gene ◽  
Division Site ◽  
Genes Encoding ◽  
Bud Site

Previous analysis of the bipolar budding pattern of Saccharomyces cerevisiae has suggested that it depends on persistent positional signals that mark the region of the division site and the tip of the distal pole on a newborn daughter cell, as well as each previous division site on a mother cell. In an attempt to identify genes encoding components of these signals or proteins involved in positioning or responding to them, we identified 11 mutants with defects in bipolar but not in axial budding. Five mutants displaying a bipolar budding-specific randomization of budding pattern had mutations in four previously known genes (BUD2, BUD5, SPA2, and BNI1) and one novel gene (BUD6), respectively. As Bud2p and Bud5p are known to be required for both the axial and bipolar budding patterns, the alleles identified here probably encode proteins that have lost their ability to interact with the bipolar positional signals but have retained their ability to interact with the distinct positional signal used in axial budding. The function of Spa2p is not known, but previous work has shown that its intracellular localization is similar to that postulated for the bipolar positional signals. BNI1 was originally identified on the basis of genetic interaction with CDC12, which encodes one of the neck-filament-associated septin proteins, suggesting that these proteins may be involved in positioning the bipolar signals. One mutant with a heterogeneous budding pattern defines a second novel gene (BUD7). Two mutants budding almost exclusively from the proximal pole carry mutations in a fourth novel gene (BUD9). A bud8 bud9 double mutant also buds almost exclusively from the proximal pole, suggesting that Bud9p is involved in positioning the proximal pole signal rather than being itself a component of this signal.

Sign in / Sign up

Export Citation Format

Share Document