scholarly journals Cdc50p, a Conserved Endosomal Membrane Protein, Controls Polarized Growth in Saccharomyces cerevisiae

2003 ◽  
Vol 14 (2) ◽  
pp. 730-747 ◽  
Author(s):  
Kenjiro Misu ◽  
Konomi Fujimura-Kamada ◽  
Takashi Ueda ◽  
Akihiko Nakano ◽  
Hiroyuki Katoh ◽  
...  
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Cell Cycle ◽  
Transmembrane Protein ◽  
Small Gtpase ◽  
Temperature Sensitive ◽  
Cortical Actin ◽  
Yeast Saccharomyces Cerevisiae ◽  
Endosomal Membrane ◽  
Actin Cables ◽  
Vacuolar Protein

During the cell cycle of the yeast Saccharomyces cerevisiae, the actin cytoskeleton and the growth of cell surface are polarized, mediating bud emergence, bud growth, and cytokinesis. We identified CDC50 as a multicopy suppressor of the myo3 myo5-360 temperature-sensitive mutant, which is defective in organization of cortical actin patches. The cdc50 null mutant showed cold-sensitive cell cycle arrest with a small bud as reported previously. Cortical actin patches and Myo5p, which are normally localized to polarization sites, were depolarized in the cdc50 mutant. Furthermore, actin cables disappeared, and Bni1p and Gic1p, effectors of the Cdc42p small GTPase, were mislocalized in the cdc50 mutant. As predicted by its amino acid sequence, Cdc50p appears to be a transmembrane protein because it was solubilized from the membranes by detergent treatment. Cdc50p colocalized with Vps21p in endosomal compartments and was also localized to the class E compartment in thevps27 mutant. The cdc50 mutant showed defects in a late stage of endocytosis but not in the internalization step. It showed, however, only modest defects in vacuolar protein sorting. Our results indicate that Cdc50p is a novel endosomal protein that regulates polarized cell growth.

scholarly journals The Role of Actin in Spindle Orientation Changes during the Saccharomyces cerevisiae Cell Cycle

1999 ◽  
Vol 146 (5) ◽  
pp. 1019-1032 ◽  
Author(s):  
Chandra L. Theesfeld ◽  
Javier E. Irazoqui ◽  
Kerry Bloom ◽  
Daniel J. Lew
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Cell Cycle ◽  
Spindle Pole Body ◽  
Spindle Pole ◽  
Spindle Orientation ◽  
Cortical Actin ◽  
Yeast Saccharomyces Cerevisiae ◽  
Daughter Cells ◽  
M Phase ◽  
Actin Cables

In the budding yeast Saccharomyces cerevisiae, the mitotic spindle must align along the mother-bud axis to accurately partition the sister chromatids into daughter cells. Previous studies showed that spindle orientation required both astral microtubules and the actin cytoskeleton. We now report that maintenance of correct spindle orientation does not depend on F-actin during G2/M phase of the cell cycle. Depolymerization of F-actin using Latrunculin-A did not perturb spindle orientation after this stage. Even an early step in spindle orientation, the migration of the spindle pole body (SPB), became actin-independent if it was delayed until late in the cell cycle. Early in the cell cycle, both SPB migration and spindle orientation were very sensitive to perturbation of F-actin. Selective disruption of actin cables using a conditional tropomyosin double-mutant also led to de- fects in spindle orientation, even though cortical actin patches were still polarized. This suggests that actin cables are important for either guiding astral microtubules into the bud or anchoring them in the bud. In addition, F-actin was required early in the cell cycle for the development of the actin-independent spindle orientation capability later in the cell cycle. Finally, neither SPB migration nor the switch from actin-dependent to actin-independent spindle behavior required B-type cyclins.

SRO9, a Multicopy Suppressor of the Bud Gpowth Defect in the Saccharomyces cerevisiae rho3-Deficient Cells, Shows Strong Genetic Interactions With Tropomyosin Genes, Suggesting Its Role in Organization of the Actin Cytoskeleton

Genetics ◽  
1997 ◽  
Vol 147 (3) ◽  
pp. 1003-1016
Author(s):  
Mitsuhiro Kagami ◽  
Akio Toh-e ◽  
Yasushi Matsui
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Actin Cytoskeleton ◽  
Actin Filaments ◽  
Rna Binding ◽  
Small Gtpase ◽  
Growth Defect ◽  
Cortical Actin ◽  
Cytoplasmic Factor ◽  
Multicopy Suppressor ◽  
Actin Cables

RHO3 encodes a Rho-type small GTPase in the yeast Saccharomyces cerevisiae and is involved in the proper organization of the actin cytoskeleton required for bud growth. SRO9 (YCL37c) was isolated as a multicopy suppressor of a rho3Δ mutation. An Sro9p domain required for function is similar to a domain in the La protein (an RNA-binding protein). Disruption of SRO9 did not affect vegetative growth, even with the simultaneous disruption of an SRO9 homologue, SRO99. However, sro9Δ was synthetically lethal with a disruption of TPM1, which encodes tropomyosin; sro9Δ tpm1Δ cells did not distribute cortical actin patches properly and lysed. We isolated TPM2, the other gene for tropomyosin, as a multicopy suppressor of a tpm1Δ sro9Δ double mutant. Genetic analysis suggests that TPM2 is functionally related to TPM1 and that tropomyosin is important but not essential for cell growth. Overexpression of SRO9 suppressed the growth defect in tpm1Δ tpm2Δ cells, disappearance of cables of actin filaments in both rho3Δ cells and tpm1Δ cells, and temperature sensitivity of actin mutant cells (act1-1 cells), suggesting that Sro9p has a function that overlaps or is related to tropomyosin function. Unlike tropomyosin, Sro9p does not colocalize with actin cables but is diffusely cytoplasmic. These results suggest that Sro9p is a new cytoplasmic factor involved in the organization of actin filaments.

scholarly journals Suppression of the Profilin-Deficient Phenotype by the RHO2 Signaling Pathway in Saccharomyces cerevisiae

Genetics ◽  
2000 ◽  
Vol 156 (2) ◽  
pp. 579-592 ◽  
Author(s):  
Nathaly Marcoux ◽  
Simon Cloutier ◽  
Ewa Zakrzewska ◽  
Pierre-Mathieu Charest ◽  
Yves Bourbonnais ◽  
...  
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Cell Wall ◽  
Signaling Pathway ◽  
Transmembrane Protein ◽  
Cortical Actin ◽  
Uncharacterized Protein ◽  
Actin Organization ◽  
Multicopy Suppressor ◽  
Multicopy Suppressors ◽  
Actin Cables

Abstract Profilin plays an important role in actin organization in all eukaryotic cells through mechanisms that are still poorly understood. We had previously shown that Mid2p, a transmembrane protein and a potential cell wall sensor, is an effective multicopy suppressor of the profilin-deficient phenotype in Saccharomyces cerevisiae. To better understand the role of Mid2p in the organization of the actin cytoskeleton, we isolated five additional multicopy suppressors of pfy1Δ cells that are Rom1p, Rom2p, Rho2p, Smy1p, and the previously uncharacterized protein Syp1p. The problems of caffeine and NaCl sensitivity, growth defects at 30° and 37°, the accumulation of intracellular vesicular structures, and a random budding pattern in pfy1Δ cells are corrected by all the suppressors tested. This is accompanied by a partial repolarization of the cortical actin patches without the formation of visible actin cables. The overexpression of Mid2p, Rom2p, and Syp1p, but not the overexpression of Rho2p and Smy1p, results in an abnormally thick cell wall in wild-type and pfy1Δ cells. Since none of the suppressors, except Rho2p, can correct the phenotype of the pfy1-111/rho2Δ strain, we propose a model in which the suppressors act through the Rho2p signaling pathway to repolarize cortical actin patches.

scholarly journals CDC42 and CDC43, two additional genes involved in budding and the establishment of cell polarity in the yeast Saccharomyces cerevisiae.

1990 ◽  
Vol 111 (1) ◽  
pp. 131-142 ◽  
Author(s):  
A E Adams ◽  
D I Johnson ◽  
R M Longnecker ◽  
B F Sloat ◽  
J R Pringle
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Cell Cycle ◽  
Cell Surface ◽  
Actin Cytoskeleton ◽  
Cell Polarity ◽  
Temperature Sensitive ◽  
Restrictive Temperature ◽  
Mitotic Spindles ◽  
Yeast Saccharomyces Cerevisiae ◽  
Continue Growth

Budding in the yeast Saccharomyces cerevisiae involves a polarized deposition of new cell surface material that is associated with a highly asymmetric disposition of the actin cytoskeleton. Mutants defective in gene CDC24, which are unable to bud or establish cell polarity, have been of great interest with regard to both the mechanisms of cellular morphogenesis and the mechanisms that coordinate cell-cycle events. To gain further insights into these problems, we sought additional mutants with defects in budding. We report here that temperature-sensitive mutants defective in genes CDC42 and CDC43, like cdc24 mutants, fail to bud but continue growth at restrictive temperature, and thus arrest as large unbudded cells. Nearly all of the arrested cells appear to begin nuclear cycles (as judged by the occurrence of DNA replication and the formation and elongation of mitotic spindles), and many go on to complete nuclear division, supporting the hypothesis that the events associated with budding and those of the nuclear cycle represent two independent pathways within the cell cycle. The arrested mutant cells display delocalized cell-surface deposition associated with a loss of asymmetry of the actin cytoskeleton. CDC42 maps distal to the rDNA on chromosome XII and CDC43 maps near lys5 on chromosome VII.

scholarly journals Recombination of Ty elements in yeast can be induced by a double-strand break.

Genetics ◽  
1995 ◽  
Vol 140 (1) ◽  
pp. 67-77 ◽  
Author(s):  
A Parket ◽  
O Inbar ◽  
M Kupiec
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Cell Cycle ◽  
Strand Break ◽  
Double Strand Break ◽  
The Other ◽  
Direct Repeats ◽  
Yeast Saccharomyces Cerevisiae ◽  
Low Frequencies ◽  
Ty Elements ◽  
Main Family

Abstract The Ty retrotransposons are the main family of dispersed repeated sequences in the yeast Saccharomyces cerevisiae. These elements are flanked by a pair of long terminal direct repeats (LTRs). Previous experiments have shown that Ty elements recombine at low frequencies, despite the fact that they are present in 30 copies per genome. This frequency is not highly increased by treatments that cause DNA damage, such as UV irradiation. In this study, we show that it is possible to increase the recombination level of a genetically marked Ty by creating a double-strand break in it. This break is repaired by two competing mechanisms: one of them leaves a single LTR in place of the Ty, and the other is a gene conversion event in which the marked Ty is replaced by an ectopically located one. In a strain in which the marked Ty has only one LTR, the double-strand break is repaired by conversion. We have also measured the efficiency of repair and monitored the progression of the cells through the cell-cycle. We found that in the presence of a double-strand break in the marked Ty, a proportion of the cells is unable to resume growth.

scholarly journals SEN1, a positive effector of tRNA-splicing endonuclease in Saccharomyces cerevisiae.

1992 ◽  
Vol 12 (5) ◽  
pp. 2154-2164 ◽  
Author(s):  
D J DeMarini ◽  
M Winey ◽  
D Ursic ◽  
F Webb ◽  
M R Culbertson
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Amino Acids ◽  
Amino Acid ◽  
Gene Product ◽  
Signal Sequence ◽  
Null Alleles ◽  
Nucleoside Triphosphate ◽  
Temperature Sensitive ◽  
Yeast Saccharomyces Cerevisiae ◽  
Amino Terminal

The SEN1 gene, which is essential for growth in the yeast Saccharomyces cerevisiae, is required for endonucleolytic cleavage of introns from all 10 families of precursor tRNAs. A mutation in SEN1 conferring temperature-sensitive lethality also causes in vivo accumulation of pre-tRNAs and a deficiency of in vitro endonuclease activity. Biochemical evidence suggests that the gene product may be one of several components of a nuclear-localized splicing complex. We have cloned the SEN1 gene and characterized the SEN1 mRNA, the SEN1 gene product, the temperature-sensitive sen1-1 mutation, and three SEN1 null alleles. The SEN1 gene corresponds to a 6,336-bp open reading frame coding for a 2,112-amino-acid protein (molecular mass, 239 kDa). Using antisera directed against the C-terminal end of SEN1, we detect a protein corresponding to the predicted molecular weight of SEN1. The SEN1 protein contains a leucine zipper motif, consensus elements for nucleoside triphosphate binding, and a potential nuclear localization signal sequence. The carboxy-terminal 1,214 amino acids of the SEN1 protein are essential for growth, whereas the amino-terminal 898 amino acids are dispensable. A sequence of approximately 500 amino acids located in the essential region of SEN1 has significant similarity to the yeast UPF1 gene product, which is involved in mRNA turnover, and the mouse Mov-10 gene product, whose function is unknown. The mutation that creates the temperature-sensitive sen1-1 allele is located within this 500-amino-acid region, and it causes a substitution for an amino acid that is conserved in all three proteins.

scholarly journals Osmotic stress and the yeast cytoskeleton: phenotype-specific suppression of an actin mutation.

1992 ◽  
Vol 118 (3) ◽  
pp. 561-571 ◽  
Author(s):  
S Chowdhury ◽  
K W Smith ◽  
M C Gustin
Keyword(s):  
Osmotic Stress ◽  
Actin Filament ◽  
Physiological Process ◽  
Actin Binding ◽  
Temperature Sensitive ◽  
Filamentous Actin ◽  
Cortical Actin ◽  
Yeast Saccharomyces Cerevisiae ◽  
Rhodamine Phalloidin ◽  
Diploid Cells

In the yeast Saccharomyces cerevisiae, actin filaments function to direct cell growth to the emerging bud. Yeast has a single essential actin gene, ACT1. Diploid cells containing a single copy of ACT1 are osmosensitive (Osms), i.e., they fail to grow in high osmolarity media (D. Shortle, unpublished observations cited by Novick, P., and D. Botstein. 1985. Cell. 40:415-426). This phenotype suggests that an underlying physiological process involving actin is osmosensitive. Here, we demonstrate that this physiological process is a rapid and reversible change in actin filament organization in cells exposed to osmotic stress. Filamentous actin was stained using rhodamine phalloidin. Increasing external osmolarity caused a rapid loss of actin filament cables, followed by a slower redistribution of cortical actin filament patches. In the recovery phase, cables and patches were restored to their original levels and locations. Strains containing an act1-1 mutation are both Osms and temperature-sensitive (Ts) (Novick and Botstein, 1985). To identify genes whose products functionally interact with actin in cellular responses to osmotic stress, we have isolated extragenic suppressors which revert only the Osms but not the Ts phenotype of an act1-1 mutant. These suppressors identify three genes, RAH1-RAH3. Morphological and genetic properties of a dominant suppressor mutation suggest that the product of the wild-type allele, RAH3+, is an actin-binding protein that interacts with actin to allow reassembly of the cytoskeleton following osmotic stress.

Mutations in SPT16/CDC68 suppress cis- and trans-acting mutations that affect promoter function in Saccharomyces cerevisiae

1991 ◽  
Vol 11 (11) ◽  
pp. 5710-5717
Author(s):  
E A Malone ◽  
C D Clark ◽  
A Chiang ◽  
F Winston
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Cell Cycle ◽  
Copy Number ◽  
Cell Cycle Control ◽  
Control Point ◽  
Temperature Sensitive ◽  
Upstream Activating Sequence ◽  
In Trans ◽  
Cis And Trans ◽  
Insertion Mutations

SPT16 was previously identified as a high-copy-number suppressor of delta insertion mutations in the 5' regions of the HIS4 and LYS2 genes of Saccharomyces cerevisiae. We have constructed null mutations in the SPT16 gene and have demonstrated that it is essential for growth. Temperature-sensitive-lethality spt16 alleles have been isolated and shown to be pleiotropic; at a temperature permissive for growth, spt16 mutations suppress delta insertion mutations, a deletion of the SUC2 upstream activating sequence, and mutations in trans-acting genes required for both SUC2 and Ty expression. In addition, SPT16 is identical to CDC68, a gene previously shown to be required for passage through the cell cycle control point START. However, at least some transcriptional effects caused by spt16 mutations are independent of arrest at START. These results and those in the accompanying paper (A. Rowley, R. A. Singer, and G. C. Johnston, Mol. Cell. Biol. 11:5718-5726, 1991) indicate that SPT16/CDC68 is required for normal transcription of many loci in S. cerevisiae.

scholarly journals Replication fork rate and origin activation during the S phase of Saccharomyces cerevisiae.

1980 ◽  
Vol 85 (1) ◽  
pp. 108-115 ◽  
Author(s):  
C J Rivin ◽  
W L Fangman
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Cell Cycle ◽  
Cycle Length ◽  
Replication Fork ◽  
Nitrogen Sources ◽  
S Phase ◽  
Phase Duration ◽  
Yeast Saccharomyces Cerevisiae ◽  
Origin Activation ◽  
Cell Cycle Length

When the growth rate of the yeast Saccharomyces cerevisiae is limited with various nitrogen sources, the duration of the S phase is proportional to cell cycle length over a fourfold range of growth rates (C.J. Rivin and W. L. Fangman, 1980, J. Cell Biol. 85:96-107). Molecular parameters of the S phases of these cells were examined by DNA fiber autoradiography. Changes in replication fork rate account completely for the changes in S-phase duration. No changes in origin-to-origin distances were detected. In addition, it was found that while most adjacent replication origins are activated within a few minutes of each other, new activations occur throughout the S phase.

Sign in / Sign up

Export Citation Format

Share Document