scholarly journals Role of turgor pressure in endocytosis in fission yeast

2014 ◽  
Vol 25 (5) ◽  
pp. 679-687 ◽  
Author(s):  
Roshni Basu ◽  
Emilia Laura Munteanu ◽  
Fred Chang
Keyword(s):  
Cell Wall ◽  
Plasma Membrane ◽  
Fission Yeast ◽  
Turgor Pressure ◽  
Time Lapse ◽  
Actin Assembly ◽  
Latrunculin A ◽  
The Media ◽  
Time Lapse Imaging

Yeast and other walled cells possess high internal turgor pressure that allows them to grow and survive in the environment. This turgor pressure, however, may oppose the invagination of the plasma membrane needed for endocytosis. Here we study the effects of turgor pressure on endocytosis in the fission yeast Schizosaccharomyces pombe by time-lapse imaging of individual endocytic sites. Decreasing effective turgor pressure by addition of sorbitol to the media significantly accelerates early steps in the endocytic process before actin assembly and membrane ingression but does not affect the velocity or depth of ingression of the endocytic pit in wild-type cells. Sorbitol also rescues endocytic ingression defects of certain endocytic mutants and of cells treated with a low dose of the actin inhibitor latrunculin A. Endocytosis proceeds after removal of the cell wall, suggesting that the cell wall does not contribute mechanically to this process. These studies suggest that endocytosis is governed by a mechanical balance between local actin-dependent inward forces and opposing forces from high internal turgor pressure on the plasma membrane.

scholarly journals Assemblies of DivIVA Mark Sites for Hyphal Branching and Can Establish New Zones of Cell Wall Growth in Streptomyces coelicolor

2008 ◽  
Vol 190 (22) ◽  
pp. 7579-7583 ◽  
Author(s):  
Antje Marie Hempel ◽  
Sheng-bing Wang ◽  
Michal Letek ◽  
José A. Gil ◽  
Klas Flärdh
Keyword(s):  
Cell Wall ◽  
Streptomyces Coelicolor ◽  
Time Lapse ◽  
Cell Wall Assembly ◽  
Peptidoglycan Synthesis ◽  
Wall Growth ◽  
Lateral Branches ◽  
Wall Assembly ◽  
Time Lapse Imaging

ABSTRACT Time-lapse imaging of Streptomyces hyphae revealed foci of the essential protein DivIVA at sites where lateral branches will emerge. Overexpression experiments showed that DivIVA foci can trigger establishment of new zones of cell wall assembly, suggesting a key role of DivIVA in directing peptidoglycan synthesis and cell shape in Streptomyces.

scholarly journals EB1 binding provides a diffusion trap mechanism regulating STIM1 localization and Ca2+ signaling

2017 ◽  
Author(s):  
Chi-Lun Chang ◽  
Yu-Ju Chen ◽  
Jen Liou
Keyword(s):  
Endoplasmic Reticulum ◽  
Plasma Membrane ◽  
Live Cell Imaging ◽  
Cell Imaging ◽  
Time Lapse ◽  
Cellular Functions ◽  
Binding Ability ◽  
Spatiotemporal Regulation ◽  
Time Lapse Imaging

AbstractThe endoplasmic reticulum (ER) Ca2+ sensor STIM1 forms oligomers and translocates to ER-plasma membrane (PM) junctions to activate store-operated Ca2+ entry (SOCE) following ER Ca2+ depletion. STIM1 also directly interacts with end binding protein 1 (EB1) at microtubule (MT) plus-ends and resembles comet-like structures during time-lapse imaging. Nevertheless, the role of STIM1-EB1 interaction in regulating SOCE remains unresolved. Using live-cell imaging combined with pharmacological perturbation and a reconstitution approach, we revealed that EB1 binding constitutes a diffusion trap mechanism restricting STIM1 targeting to ER-PM junctions. We further showed that STIM1 oligomers retain EB1 binding ability in ER Ca2+-depleted cells. EB1 binding delayed the translocation of STIM1 oligomers to ER-PM junctions and recaptured STIM1 to prevent excess SOCE and ER Ca2+ overload. Thus, the counterbalance of EB1 binding and PM targeting of STIM1 shapes the kinetics and amplitude of local SOCE in regions with growing MTs, and contributes to precise spatiotemporal regulation of Ca2+ signaling crucial for cellular functions and homeostasis.SummarySTIM1 activates store-operated Ca2+ entry (SOCE) by translocating to endoplasmic reticulum-plasma membrane junctions. Chang et al. revealed that STIM1 localization and SOCE are regulated by a diffusion trap mechanism mediated by STIM1 binding to EB1 at growing microtubule ends.

scholarly journals Sterol biosensor reveals LAM-family Ltc1-dependent sterol flow to endosomes upon Arp2/3 inhibition

2020 ◽  
Vol 219 (6) ◽  
Author(s):  
Magdalena Marek ◽  
Vincent Vincenzetti ◽  
Sophie G. Martin
Keyword(s):  
Electron Microscopy ◽  
Plasma Membrane ◽  
Schizosaccharomyces Pombe ◽  
Fission Yeast ◽  
Biological Membranes ◽  
Time Lapse ◽  
Vesicular Trafficking ◽  
Actin Assembly ◽  
Contact Sites ◽  
Family Protein

Sterols are crucial components of biological membranes, which are synthetized in the ER and accumulate in the plasma membrane (PM). Here, by applying a genetically encoded sterol biosensor (D4H), we visualize a sterol flow between PM and endosomes in the fission yeast Schizosaccharomyces pombe. Using time-lapse and correlative light-electron microscopy, we found that inhibition of Arp2/3-dependent F-actin assembly promotes the reversible relocalization of D4H from the PM to internal sterol-rich compartments (STRIC) labeled by synaptobrevin Syb1. Retrograde sterol internalization to STRIC is independent of endocytosis or an intact Golgi, but depends on Ltc1, a LAM/StARkin-family protein localized to ER-PM contact sites. The PM in ltc1Δ cells over-accumulates sterols and upon Arp2/3 inhibition forms extended ER-interacting invaginations, indicating that sterol transfer contributes to PM size homeostasis. Anterograde sterol movement from STRIC is independent of canonical vesicular trafficking but requires Arp2/3, suggesting a novel role for this complex. Thus, transfer routes orthogonal to vesicular trafficking govern the flow of sterols in the cell.

scholarly journals Simulation of the mechanics of actin assembly during endocytosis in yeast

2019 ◽  
Author(s):  
Masoud Nickaeen ◽  
Julien Berro ◽  
Thomas D. Pollard ◽  
Boris M. Slepchenko
Keyword(s):  
Experimental Data ◽  
Plasma Membrane ◽  
Fission Yeast ◽  
Turgor Pressure ◽  
Dendritic Structure ◽  
Yeast Cells ◽  
Continuous Approximation ◽  
Actin Assembly ◽  
Spatially Resolved ◽  
Single Ring

We formulated a spatially resolved model to estimate forces exerted by a polymerizing actin meshwork on an invagination of the plasma membrane during endocytosis in yeast cells. The model is a continuous approximation tightly constrained by experimental data. Simulations of the model produce forces that can overcome resistance of turgor pressure in yeast cells. Strong forces emerge due to the high density of polymerized actin in the vicinity of the invagination and because of entanglement of the meshwork due to its dendritic structure and crosslinking. The model predicts forces orthogonal to the invagination that would result in a flask shape that diminishes the net force due to turgor pressure. Simulations of the model with either two rings of nucleation promoting factors as in fission yeast or a single ring of nucleation promoting factors as in budding yeast produce enough force to elongate the invagination against the turgor pressure.

scholarly journals Actin assembly produces sufficient forces for endocytosis in yeast

2019 ◽  
Vol 30 (16) ◽  
pp. 2014-2024 ◽  
Author(s):  
Masoud Nickaeen ◽  
Julien Berro ◽  
Thomas D. Pollard ◽  
Boris M. Slepchenko
Keyword(s):  
Experimental Data ◽  
Plasma Membrane ◽  
Fission Yeast ◽  
Turgor Pressure ◽  
Dendritic Structure ◽  
Yeast Cells ◽  
Cross Linking ◽  
Actin Assembly ◽  
Spatially Resolved ◽  
Single Ring

We formulated a spatially resolved model to estimate forces exerted by a polymerizing actin meshwork on an invagination of the plasma membrane during endocytosis in yeast cells. The model, which approximates the actin meshwork as a visco-active gel exerting forces on a rigid spherocylinder representing the endocytic invagination, is tightly constrained by experimental data. Simulations of the model produce forces that can overcome resistance of turgor pressure in yeast cells. Strong forces emerge due to the high density of polymerized actin in the vicinity of the invagination and because of entanglement of the meshwork due to its dendritic structure and cross-linking. The model predicts forces orthogonal to the invagination that are consistent with formation of a flask shape, which would diminish the net force due to turgor pressure. Simulations of the model with either two rings of nucleation-promoting factors (NPFs) as in fission yeast or a single ring of NPFs as in budding yeast produce enough force to elongate the invagination against the turgor pressure.

scholarly journals The Cell Biology of Fission Yeast Septation

2016 ◽  
Vol 80 (3) ◽  
pp. 779-791 ◽  
Author(s):  
Juan C. García Cortés ◽  
Mariona Ramos ◽  
Masako Osumi ◽  
Pilar Pérez ◽  
Juan Carlos Ribas
Keyword(s):  
Cell Wall ◽  
Plasma Membrane ◽  
Fission Yeast ◽  
Cell Biology ◽  
Turgor Pressure ◽  
Ring Closure ◽  
Wall Structure ◽  
Local Defect ◽  
Cleavage Furrow ◽  
Fungal Cell

SUMMARYIn animal cells, cytokinesis requires the formation of a cleavage furrow that divides the cell into two daughter cells. Furrow formation is achieved by constriction of an actomyosin ring that invaginates the plasma membrane. However, fungal cells contain a rigid extracellular cell wall surrounding the plasma membrane; thus, fungal cytokinesis also requires the formation of a special septum wall structure between the dividing cells. The septum biosynthesis must be strictly coordinated with the deposition of new plasma membrane material and actomyosin ring closure and must occur in such a way that no breach in the cell wall occurs at any time. Because of the high turgor pressure in the fungal cell, even a minor local defect might lead to cell lysis and death. Here we review our knowledge of the septum structure in the fission yeastSchizosaccharomyces pombeand of the recent advances in our understanding of the relationship between septum biosynthesis and actomyosin ring constriction and how the two collaborate to build a cross-walled septum able to support the high turgor pressure of the cell. In addition, we discuss the importance of the septum biosynthesis for the steady ingression of the cleavage furrow.

scholarly journals Anchoring of actin to the plasma membrane enables tension production in the fission yeast cytokinetic ring

2019 ◽  
Vol 30 (16) ◽  
pp. 2053-2064 ◽  
Author(s):  
Shuyuan Wang ◽  
Ben O’Shaughnessy
Keyword(s):  
Plasma Membrane ◽  
Fission Yeast ◽  
Actin Filaments ◽  
Tensile Force ◽  
Myosin Ii ◽  
Quantitative Evidence ◽  
Explicit Simulation ◽  
Adjacent Segments ◽  
Develop Tension

The cytokinetic ring generates tensile force that drives cell division, but how tension emerges from the relatively disordered ring organization remains unclear. Long ago, a musclelike sliding filament mechanism was proposed, but evidence for sarcomeric order is lacking. Here we present quantitative evidence that in fission yeast, ring tension originates from barbed-end anchoring of actin filaments to the plasma membrane, providing resistance to myosin forces that enables filaments to develop tension. The role of anchoring was highlighted by experiments on isolated fission yeast rings, where sections of ring became unanchored from the membrane and shortened ∼30-fold faster than normal. The dramatically elevated constriction rates are unexplained. Here we present a molecularly explicit simulation of constricting partially anchored rings as studied in these experiments. Simulations accurately reproduced the experimental constriction rates and showed that following anchor release, a segment becomes tensionless and shortens via a novel noncontractile reeling-in mechanism at about the velocity of load-free myosin II. The ends are reeled in by barbed end–anchored actin filaments in adjacent segments. Other actin anchoring schemes failed to constrict rings. Our results quantitatively support a specific organization and anchoring scheme that generate tension in the cytokinetic ring.

scholarly journals Anchoring of actin to the plasma membrane enables tension production in the fission yeast cytokinetic ring

2019 ◽  
Author(s):  
Shuyuan Wang ◽  
Ben O’Shaughnessy
Keyword(s):  
Plasma Membrane ◽  
Fission Yeast ◽  
Actin Filaments ◽  
Tensile Force ◽  
Myosin Ii ◽  
Quantitative Evidence ◽  
Explicit Simulation ◽  
Adjacent Segments ◽  
Develop Tension

AbstractThe cytokinetic ring generates tensile force that drives cell division, but how tension emerges from the relatively disordered ring organization remains unclear. Long ago a muscle-like sliding filament mechanism was proposed, but evidence for sarcomeric order is lacking. Here we present quantitative evidence that in fission yeast ring tension originates from barbed-end anchoring of actin filaments to the plasma membrane, providing resistance to myosin forces which enables filaments to develop tension. The role of anchoring was highlighted by experiments on isolated fission yeast rings, where sections of ring unanchored from the membrane and shortened ~30-fold faster than normal [Mishra M., et al. (2013) Nat Cell Biol 15(7):853-859]. The dramatically elevated constriction rates are unexplained. Here we present a molecularly explicit simulation of constricting partially anchored rings as studied in these experiments. Simulations accurately reproduced the experimental constriction rates, and showed that following anchor release a segment becomes tensionless and shortens via a novel non-contractile reeling-in mechanism at about the load-free myosin-II velocity. The ends are reeled in by barbed-end-anchored actin filaments in adjacent segments. Other actin anchoring schemes failed to constrict rings. Our results quantitatively support a specific organization and anchoring scheme that generates tension in the cytokinetic ring.

scholarly journals Sterol flow between the plasma membrane and the endosome is regulated by the LAM family protein Ltc1

2019 ◽  
Author(s):  
Magdalena Marek ◽  
Vincent Vincenzetti ◽  
Sophie G. Martin
Keyword(s):  
Plasma Membrane ◽  
Membrane Integrity ◽  
Physiological Role ◽  
Time Lapse ◽  
Vesicular Trafficking ◽  
Protein Oligomerization ◽  
Family Protein ◽  
State Growth ◽  
Eukaryotic Organisms ◽  
Time Lapse Imaging

AbstractSterols are crucial components of biological membranes that help maintain membrane integrity and regulate various processes such as endocytosis, protein oligomerization and signaling. Although synthetized in the ER, sterols are at highest concentrations at the plasma membrane (PM) in all eukaryotic organisms. Here, by applying a genetically encoded sterol biosensor (D4H), we visualize a sterol flow between PM and endosomes in the fission yeast Schizosaccharomyces pombe. While D4H is detected at the PM during steady-state growth, inhibition of Arp2/3-dependent F-actin assembly unexpectedly promotes the reversible re-localization of the probe to internal sterol rich compartments (STRIC), as shown by correlative light-electron microscopy. Time-lapse imaging identifies STRIC as a late secretory, endosomal compartment labelled by the synaptobrevin Syb1. Retrograde sterol internalization to STRIC is independent of endocytosis or an intact Golgi. Instead, it depends on Ltc1, a LAM/StARkin-family protein that localizes to ER-PM contact sites. In ltc1Δ, sterols over-accumulate at the PM, which forms extended ER-interacting invaginations, indicating that sterol transfer by Ltc1 contributes to PM size homeostasis. Anterograde sterol movement from STRIC is independent of canonical vesicular trafficking components but requires Arp2/3 activity, suggesting a novel physiological role for this complex. Thus, transfer routes orthogonal to vesicular trafficking govern the retrograde and anterograde flow of sterols in the cell.

Sign in / Sign up

Export Citation Format

Share Document