scholarly journals Local Arp2/3-dependent actin assembly modulates applied traction force during apCAM adhesion site maturation

2017 ◽  
Vol 28 (1) ◽  
pp. 98-110 ◽  
Author(s):  
Kenneth B. Buck ◽  
Andrew W. Schaefer ◽  
Vincent T. Schoonderwoert ◽  
Matthew S. Creamer ◽  
Eric R. Dufresne ◽  
...  
Keyword(s):  
Growth Cone ◽  
Network Flow ◽  
Traction Force ◽  
Axon Growth ◽  
Immunoglobulin Superfamily ◽  
Retrograde Flow ◽  
Actin Assembly ◽  
Growth Responses ◽  
Mechanical Restraint ◽  
Adhesion Sites

Homophilic binding of immunoglobulin superfamily molecules such as the Aplysia cell adhesion molecule (apCAM) leads to actin filament assembly near nascent adhesion sites. Such actin assembly can generate significant localized forces that have not been characterized in the larger context of axon growth and guidance. We used apCAM-coated bead substrates applied to the surface of neuronal growth cones to characterize the development of forces evoked by varying stiffness of mechanical restraint. Unrestrained bead propulsion matched or exceeded rates of retrograde network flow and was dependent on Arp2/3 complex activity. Analysis of growth cone forces applied to beads at low stiffness of restraint revealed switching between two states: frictional coupling to retrograde flow and Arp2/3-dependent propulsion. Stiff mechanical restraint led to formation of an extensive actin cup matching the geometric profile of the bead target and forward growth cone translocation; pharmacological inhibition of the Arp2/3 complex or Rac attenuated F-actin assembly near bead binding sites, decreased the efficacy of growth responses, and blocked accumulation of signaling molecules associated with nascent adhesions. These studies introduce a new model for regulation of traction force in which local actin assembly forces buffer nascent adhesion sites from the mechanical effects of retrograde flow.

scholarly journals Regulation of axon growth by myosin II–dependent mechanocatalysis of cofilin activity

2019 ◽  
Vol 218 (7) ◽  
pp. 2329-2349 ◽  
Author(s):  
Xiao-Feng Zhang ◽  
Visar Ajeti ◽  
Nicole Tsai ◽  
Arash Fereydooni ◽  
William Burns ◽  
...  
Keyword(s):  
Growth Cone ◽  
Network Flow ◽  
Myosin Ii ◽  
Point Contact ◽  
Traction Force ◽  
Axon Growth ◽  
Network Density ◽  
Actin Network ◽  
Growth Responses ◽  
Contact Density

Serotonin (5-HT) is known to increase the rate of growth cone advance via cofilin-dependent increases in retrograde actin network flow and nonmuscle myosin II activity. We report that myosin II activity is regulated by PKC during 5-HT responses and that PKC activity is necessary for increases in traction force normally associated with these growth responses. 5-HT simultaneously induces cofilin-dependent decreases in actin network density and PKC-dependent increases in point contact density. These reciprocal effects facilitate increases in traction force production in domains exhibiting decreased actin network density. Interestingly, when PKC activity was up-regulated, 5-HT treatments resulted in myosin II hyperactivation accompanied by catastrophic cofilin-dependent decreases in actin filament density, sudden decreases in traction force, and neurite retraction. These results reveal a synergistic relationship between cofilin and myosin II that is spatiotemporally regulated in the growth cone via mechanocatalytic effects to modulate neurite growth.

scholarly journals Growth cone behavior and production of traction force.

1990 ◽  
Vol 111 (5) ◽  
pp. 1949-1957 ◽  
Author(s):  
S R Heidemann ◽  
P Lamoureux ◽  
R E Buxbaum
Keyword(s):  
Growth Cone ◽  
Contractile Activity ◽  
Glass Fibers ◽  
Force Production ◽  
Traction Force ◽  
Dorsal Surface ◽  
Growth Cones ◽  
Retrograde Flow ◽  
Cortical Actin ◽  
Over The Top

The growth cone must push its substrate rearward via some traction force in order to propel itself forward. To determine which growth cone behaviors produce traction force, we observed chick sensory growth cones under conditions in which force production was accommodated by movement of obstacles in the environment, namely, neurites of other sensory neurons or glass fibers. The movements of these obstacles occurred via three, different, stereotyped growth cone behaviors: (a) filopodial contractions, (b) smooth rearward movement on the dorsal surface of the growth cone, and (c) interactions with ruffling lamellipodia. More than 70% of the obstacle movements were caused by filopodial contractions in which the obstacle attached at the extreme distal end of a filopodium and moved only as the filopodium changed its extension. Filopodial contractions were characterized by frequent changes of obstacle velocity and direction. Contraction of a single filopodium is estimated to exert 50-90 microdyn of force, which can account for the pull exerted by chick sensory growth cones. Importantly, all five cases of growth cones growing over the top of obstacle neurites (i.e., geometry that mimics the usual growth cone/substrate interaction), were of the filopodial contraction type. Some 25% of obstacle movements occurred by a smooth backward movement along the top surface of growth cones. Both the appearance and rate of movements were similar to that reported for retrograde flow of cortical actin near the dorsal growth cone surface. Although these retrograde flow movements also exerted enough force to account for growth cone pulling, we did not observe such movements on ventral growth cone surfaces. Occasionally obstacles were moved by interaction with ruffling lamellipodia. However, we obtained no evidence for attachment of the obstacles to ruffling lamellipodia or for directed obstacle movements by this mechanism. These data suggest that chick sensory growth cones move forward by contractile activity of filopodia, i.e., isometric contraction on a rigid substrate. Our data argue against retrograde flow of actin producing traction force.

scholarly journals RACK1 is required for axon guidance and local translation at growth cone point contacts

2019 ◽  
Author(s):  
Leah Kershner ◽  
Taylor Bumbledare ◽  
Paige Cassidy ◽  
Samantha Bailey ◽  
Kristy Welshhans
Keyword(s):  
Nervous System ◽  
Growth Cone ◽  
Axon Growth ◽  
Growth Cones ◽  
Scaffolding Protein ◽  
Local Translation ◽  
Point Contacts ◽  
Adhesion Sites ◽  
Actin Mrna ◽  
Developing Nervous System

AbstractLocal translation regulates the formation of appropriate connectivity in the developing nervous system. However, the localization and molecular mechanisms underlying this translation within growth cones is not well understood. Receptor for activated C kinase 1 (RACK1) is a multi-functional ribosomal scaffolding protein that interacts with β-actin mRNA. We recently showed that RACK1 localizes to and regulates the formation of point contacts, which are adhesion sites that control growth cone motility. This suggests that local translation occurs at these adhesion sites that are important for axonal pathfinding, but this has not been investigated. Here, we show that RACK1 is required for BDNF-induced local translation of β-actin mRNA in growth cones. Furthermore, the ribosomal binding function of RACK1 regulates point contact formation, and axon growth and guidance. We also find that local translation of β-actin occurs at point contacts. Taken together, we show that adhesions are a targeted site of local translation within growth cones, and RACK1 is critical to the formation of point contacts and appropriate neural development. These data provide further insight into how and where local translation is regulated, and thereby leads to appropriate connectivity formation in the developing nervous system.

The metalloproteinase ADAM10 is required for retinal ganglion cell axon guidance in the developing visual systems

2007 ◽  
Vol 30 (4) ◽  
pp. 77
Author(s):  
Y. Y. Chen ◽  
C. L. Hehr ◽  
K. Atkinson-Leadbeater ◽  
J. C. Hocking ◽  
S. McFarlane
Keyword(s):  
Ganglion Cell ◽  
Axon Guidance ◽  
Retinal Ganglion Cell ◽  
Growth Cone ◽  
Expression Patterns ◽  
Optic Tract ◽  
Axon Growth ◽  
Proteolytic Processing ◽  
Retinal Ganglion

Background: The growth cone interprets cues in its environment in order to reach its target. We want to identify molecules that regulate growth cone behaviour in the developing embryo. We investigated the role of A disintegrin and metalloproteinase 10 (ADAM10) in axon guidance in the developing visual system of African frog, Xenopus laevis. Methods: We first examined the expression patterns of adam10 mRNA by in situ hybridization. We then exposed the developing optic tract to an ADAM10 inhibitor, GI254023X, in vivo. Lastly, we inhibited ADAM10 function in diencephalic neuroepithelial cells (through which retinal ganglion cell (RGC) axons extend) or RGCs by electroporating or transfecting an ADAM10 dominant negative (dn-adam10). Results: We show that adam10 mRNA is expressed in the dorsal neuroepithelium over the time RGC axons extend towards their target, the optic tectum. Second, pharmacological inhibition of ADAM10 in an in vivo exposed brain preparation causes the failure of RGC axons to recognize their target at low concentrations (0.5, 1 μM), and the failure of the axons to make a caudal turn in the mid-diencephalon at higher concentration (5 μM). Thus, ADAM10 function is required for RGC axon guidance at two key guidance decisions. Finally, molecular inhibition of ADAM10 function by electroporating dn-adam10 in the brain neuroepithelium causes defects in RGC axon target recognition (57%) and/or defects in caudal turn (12%), as seen with the pharmacological inhibitor. In contrast, molecular inhibition of ADAM10 within the RGC axons has no effect. Conclusions: These data argue strongly that ADAM10 acts cell non-autonomously within the neuroepithelium to regulate the guidance of RGC axons. This study shows for the first time that a metalloproteinase acts in a cell non-autonomous fashion to direct vertebrate axon growth. It will provide important insights into candidate molecules that could be used to reform nerve connections if destroyed because of injury or disease. References Hattori M, Osterfield M, Flanagan JG. Regulated cleavage of a contact-mediated axon repellent. Science 2000; 289(5483):1360-5. Janes PW, Saha N, Barton WA, Kolev MV, Wimmer-Kleikamp SH, Nievergall E, Blobel CP, Himanen JP, Lackmann M, Nikolov DB. Adam meets Eph: an ADAM substrate recognition module acts as a molecular switch for ephrin cleavage in trans. Cell 2005; 123(2):291-304. Pan D, Rubin GM. Kuzbanian controls proteolytic processing of Notch and mediates lateral inhibition during Drosophila and vertebrate neurogenesis. Cell 1997; 90(2):271-80.

Semaphorin3A regulates axon growth independently of growth cone repulsion via modulation of TrkA signaling

2008 ◽  
Vol 20 (3) ◽  
pp. 467-479 ◽  
Author(s):  
A. Ben-Zvi ◽  
L. Ben-Gigi ◽  
Z. Yagil ◽  
O. Lerman ◽  
O. Behar
Keyword(s):  
Growth Cone ◽  
Axon Growth

scholarly journals Regulated Actin Cytoskeleton Assembly at Filopodium Tips Controls Their Extension and Retraction

1999 ◽  
Vol 146 (5) ◽  
pp. 1097-1106 ◽  
Author(s):  
Aneil Mallavarapu ◽  
Tim Mitchison
Keyword(s):  
Actin Cytoskeleton ◽  
Growth Cone ◽  
Actin Filaments ◽  
Neuroblastoma Cell ◽  
Initial Step ◽  
Growth Cones ◽  
Neuroblastoma Cell Line ◽  
Dominant Factor ◽  
Retrograde Flow ◽  
Assembly Rate

The extension and retraction of filopodia in response to extracellular cues is thought to be an important initial step that determines the direction of growth cone advance. We sought to understand how the dynamic behavior of the actin cytoskeleton is regulated to produce extension or retraction. By observing the movement of fiduciary marks on actin filaments in growth cones of a neuroblastoma cell line, we found that filopodium extension and retraction are governed by a balance between the rate of actin cytoskeleton assembly at the tip and retrograde flow. Both assembly and flow rate can vary with time in a single filopodium and between filopodia in a single growth cone. Regulation of assembly rate is the dominant factor in controlling filopodia behavior in our system.

scholarly journals Grip and slip of L1-CAM on adhesive substrates direct growth cone haptotaxis

2018 ◽  
Vol 115 (11) ◽  
pp. 2764-2769 ◽  
Author(s):  
Kouki Abe ◽  
Hiroko Katsuno ◽  
Michinori Toriyama ◽  
Kentarou Baba ◽  
Tomoyuki Mori ◽  
...  
Keyword(s):  
Cell Migration ◽  
Growth Cone ◽  
Cell Adhesion Molecule ◽  
Chemical Cues ◽  
Traction Force ◽  
Human Patient ◽  
Direct Growth ◽  
Direct Cell ◽  
Conventional Cell ◽  
Directional Cell Migration

Chemical cues presented on the adhesive substrate direct cell migration, a process termed haptotaxis. To migrate, cells must generate traction forces upon the substrate. However, how cells probe substrate-bound cues and generate directional forces for migration remains unclear. Here, we show that the cell adhesion molecule (CAM) L1-CAM is involved in laminin-induced haptotaxis of axonal growth cones. L1-CAM underwent grip and slip on the substrate. The ratio of the grip state was higher on laminin than on the control substrate polylysine; this was accompanied by an increase in the traction force upon laminin. Our data suggest that the directional force for laminin-induced growth cone haptotaxis is generated by the grip and slip of L1-CAM on the substrates, which occur asymmetrically under the growth cone. This mechanism is distinct from the conventional cell signaling models for directional cell migration. We further show that this mechanism is disrupted in a human patient with L1-CAM syndrome, suffering corpus callosum agenesis and corticospinal tract hypoplasia.

scholarly journals L1-dependent neuritogenesis involves ankyrinB that mediates L1-CAM coupling with retrograde actin flow

2003 ◽  
Vol 163 (5) ◽  
pp. 1077-1088 ◽  
Author(s):  
Kazunari Nishimura ◽  
Fumie Yoshihara ◽  
Takuro Tojima ◽  
Noriko Ooashi ◽  
Woohyun Yoon ◽  
...  
Keyword(s):  
Cell Adhesion Molecule ◽  
Traction Force ◽  
Neurite Growth ◽  
Growth Cones ◽  
Retrograde Flow ◽  
Actin Network ◽  
Filamentous Actin ◽  
Neurite Elongation ◽  
Neurite Initiation ◽  
Cell Adhesion Molecule L1

The cell adhesion molecule L1 (L1-CAM) plays critical roles in neurite growth. Its cytoplasmic domain (L1CD) binds to ankyrins that associate with the spectrin–actin network. This paper demonstrates that L1-CAM interactions with ankyrinB (but not with ankyrinG) are involved in the initial formation of neurites. In the membranous protrusions surrounding the soma before neuritogenesis, filamentous actin (F-actin) and ankyrinB continuously move toward the soma (retrograde flow). Bead-tracking experiments show that ankyrinB mediates L1-CAM coupling with retrograde F-actin flow in these perisomatic structures. Ligation of the L1-CAM ectodomain by an immobile substrate induces L1CD–ankyrinB binding and the formation of stationary ankyrinB clusters. Neurite initiation preferentially occurs at the site of these clusters. In contrast, ankyrinB is involved neither in L1-CAM coupling with F-actin flow in growth cones nor in L1-based neurite elongation. Our results indicate that ankyrinB promotes neurite initiation by acting as a component of the clutch module that transmits traction force generated by F-actin flow to the extracellular substrate via L1-CAM.

scholarly journals Transmission of growth cone traction force through apCAM–cytoskeletal linkages is regulated by Src family tyrosine kinase activity

2001 ◽  
Vol 155 (3) ◽  
pp. 427-438 ◽  
Author(s):  
Daniel M. Suter ◽  
Paul Forscher
Keyword(s):  
Tyrosine Kinase ◽  
Growth Cone ◽  
Kinase Activity ◽  
Kinase Inhibitors ◽  
Traction Force ◽  
Tyrosine Kinase Activity ◽  
Cellular Mechanisms ◽  
Traction Forces ◽  
Kinase Activation ◽  
Neuronal Growth Cone

Tyrosine kinase activity is known to be important in neuronal growth cone guidance. However, underlying cellular mechanisms are largely unclear. Here, we report how Src family tyrosine kinase activity controls apCAM-mediated growth cone steering by regulating the transmission of traction forces through receptor–cytoskeletal linkages. Increased levels of tyrosine phosphorylation were detected at sites where beads coated with apCAM ligands were physically restrained to induce growth cone steering, but not at unrestrained bead binding sites. Interestingly, the rate and level of phosphotyrosine buildup near restrained beads were decreased by the myosin inhibitor 2,3-butanedione-2-monoxime, suggesting that tension promotes tyrosine kinase activation. While not affecting retrograde F-actin flow rates, genistein and the Src family selective tyrosine kinase inhibitors PP1 and PP2 strongly reduced the growth cone's ability to apply traction forces through apCAM–cytoskeletal linkages, assessed using the restrained bead interaction assay. Furthermore, increased levels of an activated Src family kinase were detected at restrained bead sites during growth cone steering events. Our results suggest a mechanism by which growth cones select pathways by sampling both the molecular nature of the substrate and its ability to withstand the application of traction forces.

Sign in / Sign up

Export Citation Format

Share Document