Heavy Metal, pH, and Total Solid Content of Maple Sap and Syrup Produced in Eastern Canada

1989 ◽  
Vol 72 (4) ◽  
pp. 674-676 ◽  
Author(s):  
Robin A Robinson ◽  
Kenneth S Maclean ◽  
Henry M Macconnell
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Total Solid ◽  
Solid Content ◽  
Eastern Canada ◽  
Total Solid Content ◽  
Total Solids ◽  
Significant Difference ◽  
Solids Content ◽  
Maple Sap

Abstract Maple sap and syrups in eastern Canada were analyzed for pH, total solids, and the heavy metals Cu, Fe, Pb, and Zn. The levels of heavy metals found were within the range normally contained in food and water samples except for Pb. The concentration factor found in reducing sap to syrup did not reflect the same concentration change for the measured parameters. This indicates removal or conversion of heavy metals and organic acids with the sugar sands. There was no statistical difference among provinces with respect to the heavy metal, pH, and total solids content of sap. The only significant difference in syrup occurred with Cu and this appeared to be the result of the processing procedure. As the season progressed, the Cu, Pb, pH, and total solids content of the sap decreased while Zn increased and Fe showed little change. Syrups reflected a similar change. Statistical differences occurred in sap composition among sites within each province.

Composition of beagle dog milk

1960 ◽  
Vol 199 (4) ◽  
pp. 731-732 ◽  
Author(s):  
Jack R. Luick ◽  
Harold R. Parker ◽  
A. C. Andersen
Keyword(s):  
Statistical Study ◽  
Total Solid ◽  
Fat Content ◽  
Solid Content ◽  
Total Solid Content ◽  
Mean Values ◽  
Total Solids ◽  
Beagle Dog ◽  
The Mean

A statistical study has been made of the composition of the major C-containing compounds taken from beagle dog milk during the 3rd through 5th week of lactation. The mean values are as follows: 26% total solids, 13% fat, 3.3% lactose and 9.8% protein. Total solid content was found to vary with fat content according to the equation: % total solids = 15.6 + 0.85 % fat.

scholarly journals Studies on Pollution due to Discharge of Effluent from Pharmaceutical Industries of Dombivali Industrial Belt of Mumbai, India

2013 ◽  
Vol 22 ◽  
pp. 16-23
Author(s):  
P.U. Singare ◽  
S.S. Dhabarde
Keyword(s):  
Heavy Metals ◽  
Chemical Properties ◽  
Total Solid ◽  
Solid Content ◽  
Toxic Heavy Metals ◽  
Total Solid Content ◽  
Physico Chemical ◽  
Specific Discharge ◽  
Pharmaceutical Industries ◽  
One Year

The paper deals with monitoring of pollution arising due to pharmaceutical based industries located along the Dombivali industrial belt of Mumbai, India. The study was carried for the period of one year from June, 2012 to May, 2013 to study the level of toxic heavy metals and the physico-chemical properties of waste water effluents discharged from the above industries. The concentration level of majority of toxic heavy metals like Cu, Cr, Pb, Fe and Zn were found to be maximum of 14.06, 0.57, 0.42, 18.93 and 3.31 ppm respectively in the month of February, while Ni concentration was found to be maximum of 0.43 ppm in the month of June. The pH and BOD values were reported to be maximum of 12.54 and 546 ppm respectively in the month of October. The conductivity and total solid content was found to be maximum of 27400 µmhos/cm and 9401 ppm respectively in the month of June. The cyanide content was maximum of 0.13 ppm in the month of April. The alkalinity, hardness, salinity, chloride, phosphate and COD content was reported maximum of 852, 694, 10.36, 4821, 46.32 and 1271 ppm respectively in the month of February. The DO content was found to be minimum of 3.00 ppm in the month of February. It was observed that the level of many of these toxic heavy metals except Zn and various physico-chemical parameters were above the tolerable limit set for inland surface water. From the results of the present investigation it seems that the time has come to move towards ecosystem specific discharge standards to maintain the health and productivity of natural resources on which the majority of Indians are dependent

SOME PROPERTIES OF NORMAL CHICK ALLANTOIC FLUID IN RELATION TO INFLUENZA VIRUS HEMAGGLUTINATION

1950 ◽  
Vol 28e (3) ◽  
pp. 113-120 ◽  
Author(s):  
J. R. Polley ◽  
M. M. Burr ◽  
A. L. Gillen
Keyword(s):  
Influenza Virus ◽  
Incubation Time ◽  
Allantoic Fluid ◽  
Total Solid ◽  
Solid Content ◽  
Total Solid Content ◽  
Total Solids ◽  
Hemagglutination Titer ◽  
Decreasing Ph

The pH, oxidation–reduction potential, total solids, nonspecific hemagglutination titer, and the titer of the inhibitor of influenza virus hemagglutination have been determined in the normal allantoic fluid of the chick embryo as the incubation time increased. These determinations were repeated after the allantoic fluid had been stored for 48 hr. at 0 °C. It was found that as the incubation time increased (1) the pH decreased progressively, (2) the Eh remained positive throughout, (3) the total solid content increased, (4) the nonspecific hemagglutination titer remained negligible, (5) the inhibition titer increased rapidly. Storage for 48 hr. at 0 °C. produced no change other than a small rise in the pH. By buffering the allantoic fluid in vivo, it appeared that the increasing inhibition titer was not directly related to the decreasing pH. The inhibition titer of the allantoic fluid was not decreased after dialysis, indicating that it is not affected by the amount of urates in the fluid. Thus it appears that the inhibition titer is related directly to a component of the increasing total solids which is unidentified as yet.

scholarly journals Pollution due to Textile Industries along Dombivali Industrial Belt of Mumbai, India

2013 ◽  
Vol 22 ◽  
pp. 24-31
Author(s):  
P.U. Singare ◽  
S.S. Dhabarde
Keyword(s):  
Heavy Metals ◽  
Concentration Level ◽  
Chemical Properties ◽  
Chloride Content ◽  
Total Solid ◽  
Solid Content ◽  
Toxic Heavy Metals ◽  
Total Solid Content ◽  
Physico Chemical ◽  
Textile Industries

The paper deals with monitoring of pollution arising due to textile based industries located along the Dombivali industrial belt of Mumbai, India. The study was carried for the period of one year from June, 2012 to May, 2013 to study the level of toxic heavy metals and the physico-chemical properties of waste water effluents discharged from the above industries. The concentration level of majority of toxic heavy metals like Cu, Ni, Pb, and Zn were reported to be maximum of 45.58, 2.00, 2.06 and 9.20 ppm respectively in the month of April, while Cr and Fe concentration levels were found to be 2.50 and 55.30 ppm in the month of March. The effluent samples collected in the month of July was reported to show high BOD content of 564 ppm, while COD content was maximum of 2436 ppm in the month of October. The effluent samples collected in the month of January was having very low DO content of 3.21 ppm and high cyanide content of 0.09 ppm. The alkalinity, hardness and chloride content were maximum of 2158, 198 and 2765 ppm respectively in the effluent samples collected in the month of February. The effluents were having high total solid content of 8269 ppm during the month of April, while the salinity and phosphate contents were reported high of 5.64 and 125.70 ppm during the month of May. It was observed that the concentration level of majority of toxic heavy metals and the values of various physico-chemical parameters were above the tolerable limit set for inland surface water. The present experimental data on environmental risk assessment studies due to textile industries may be regarded as an aid towards a better understanding of the problem arising due to such industries. There is a need to convey the message that prevention of adverse health effects and promotion of health are profitable investments for employers and employees as a support to a sustainable development of economics.

scholarly journals Pollution Discharge Scenario of Oil and Surfactants Manufacturing Industries along Dombivali Industrial Belt of Mumbai, India

2013 ◽  
Vol 22 ◽  
pp. 32-39
Author(s):  
P.U. Singare ◽  
S.S. Dhabarde
Keyword(s):  
Waste Water ◽  
Heavy Metals ◽  
Research Work ◽  
Chemical Properties ◽  
Total Solid ◽  
Solid Content ◽  
Manufacturing Industries ◽  
Toxic Heavy Metals ◽  
Total Solid Content ◽  
Physico Chemical

The paper deals with monitoring of pollution arising due to oil and surfactants manufacturing industries located along the Dombivali industrial belt of Mumbai, India. The study was carried for the period of one year from June, 2012 to May, 2013 to study the level of toxic heavy metals and the physico-chemical properties of waste water effluents discharged from the above industries. The maximum concentration of majority of heavy metals like Cu, Ni, Cr, Pb and Fe were recorded as 13.48, 3.90, 13.30, 1.75 and 15.89 ppm respectively, which were above the tolerable limit set for inland surface water. The maximum pH and conductivity values of the industrial waste water effluent were recorded as 10.05 and 27800 µmhos/cm respectively. The majority of physico-chemical parameters like chloride, cyanide, phosphate and total solid content were found to be maximum in the month of March having the respective values of 2340, 0.09, 3 5.2 and 8755 ppm. The effluent samples collected in the month of May was found to have low DO content of 3.33 ppm and high BOD content of 643 ppm. The alkalinity and COD values were reported to be maximum of 1988 and 4410 ppm respectively in the month of February. The hardness and salinity content was reported maximum of 131 and 5.76 ppm during the month of December and June respectively. The results of present research work indicates that time has come to move towards ecosystem specific discharge standards to maintain the health and productivity of natural resources on which the majority of Indians are dependent

scholarly journals Total Solid Content and Compound Properties from Different Collection Time of Hevea brasiliensis Latex

2019 ◽  
Vol 22 (4) ◽  
pp. 104-108
Author(s):  
◽  
Andi Wijaya ◽  
Arief Rachmawan ◽  
Mochlisin Andriyanto
Keyword(s):  
Physical Properties ◽  
Hevea Brasiliensis ◽  
Total Solid ◽  
Solid Content ◽  
Rubber Content ◽  
Rubber Latex ◽  
Total Solid Content ◽  
Significant Difference ◽  
Collection Time

Abstract This study compared the total solid content and compound properties of Hevea rubber latex produced from material collected during different periods. Samples were collected from five trees, with the collection replicated three times with tapping task as replication. Observed parameters included total solid content, vulcanization characteristics, technical and physical properties. The results exhibited that the longer latex flowed, the more total solid content tended to decrease. Results indicate that compound of latex collected 20 minutes (C20), 60 minutes (C60), and 300 minutes (C300) after tapping qualified for SIR 20. Other parameters did not show a significant difference among the three tested compounds. Considering the products requiring high dry rubber content, it is suggested not to blend the late collection with main collected latex.

Supercritical Water Gasification of Scenedesmus Dimorphus µ-algae

2017 ◽  
Vol 15 (4) ◽  
Author(s):  
A. Molino ◽  
T. Marino ◽  
V. Larocca ◽  
P. Casella ◽  
J. Rimauro ◽  
...  
Keyword(s):  
Supercritical Water ◽  
Energy Demand ◽  
Energy Recovery ◽  
Experimental Tests ◽  
Total Solid ◽  
Solid Content ◽  
Total Solid Content ◽  
Syngas Production ◽  
Scenedesmus Dimorphus ◽  
Solids Content

Abstract The aim of the paper is based on the experimental tests of Gasification in supercritical water for humid biomass, Scenedesmus dimorphus. In this work, experimental tests were carried out in order to understand the main parameters of the SCWG process and their influence varying the total solids content, GGE and CGE gas yield and energy recovery. Based on experimental test and considering literature data about energy demand for microalgae growth and energy required for SCWG process it was possible to evaluate that with minimum total solid content necessary for setting-up a self-sustainable process considering the only energy recovery from the condensation of the water outlet the process. At the same time these simulation were repeated considering of use the enthalpy of water in SCW condition for turbine expansion instead heat recovery obtained not only syngas production usable for biofuels synthesis but also power production.

APLIKASI PROSES DIGESTASI ANAEROBIK LUMPUR BIOLOGI INSTALASI PENGOLAHAN AIR LIMBAH INDUSTRI KERTAS

2014 ◽  
Vol 4 (02) ◽  
Author(s):  
Rina S. Soetopo ◽  
Sri Purwati ◽  
Henggar Hardiani ◽  
Mukharomah Nur Aini ◽  
Krisna Adhitya Wardhana
Keyword(s):  
Oxygen Demand ◽  
Total Solid ◽  
Pilot Scale ◽  
Organic Content ◽  
Solid Content ◽  
Uasb Reactor ◽  
Anaerobic Sludge ◽  
Organic Loading ◽  
Total Solid Content ◽  
Average Value

A continuous pilot scale study has been conducted to investigate the effectiveness of anaerobic digestion of biological sludge. The sludge has a total solid content of 0.53% - 1.1%, pH of 7.20 to 7.32. Its organic content is about 97 %, The research were conducted in two stages, which are acidification (performed in 3 m3 the Continously Stirred Tank Reactor/CSTR at pH of 5.5 to 6.0) and methanation (performed in 5 m3 the Up Flow Anaerobic Sludge Blanket/UASB reactor at pH 6.5 to 7.0). The retention time (RT) was gradually shortened from 6 days to 1 day for acidification and from 8 days to 2 days for methanation. The results showed that operating the CSTR at the RT of 1 day and the organic loading of 8.23 g Volatile Solid (VS)/m3.day could produce Volatile Fatty Acid (VFA) at an average value of 17.3 g/kg VS.day. Operating the UASB reactor at the RT of 2 days and the organic loading (Chemical Oxygen Demand/COD) of 2.4 kg COD/m3.day could produce biogas at an average value of 66.3 L/day, with an average methane content of 69.9%, methane rate of 0.17 L CH4/g COD reduction or 19.06 L CH4/kg VS. Furthermore, methanation could reduce COD at an average value of 51.2 %, resulting in the effluent average value of COD filtrate and COD total of 210.1 mg/L and 375.2 mg /L, respectively.Keywords: acidification, methanation, CSTR, UASB, biogas ABSTRAKPercobaan digestasi anaerobik lumpur IPAL biologi industri kertas secara kontinyu skala pilot telah dilakukan di industri kertas dengan tujuan mengkaji efektivitas proses digestasi anaerobik dalam mengolah lumpur tersebut. Lumpur yang digunakan memiliki total solids sekitar 0,53% – 1,1%, pH netral (7,20 – 7,32) dengan komponen utama senyawa organik sekitar 97%. Percobaan dilakukan dalam dua tahap yaitu asidifikasi dalam reaktor CSTR berkapasitas 3 m3 pada pH 5,5 – 6,0 dan metanasi dalam reaktor UASB berkapasitas 5 m3 pada pH 6,5 – 7,0. Percobaan dilakukan dengan waktu retensi yang dipersingkat secara bertahap dari 6 hari ke 1 hari untuk proses asidifikasi dan dari 8 hari ke 2 hari untuk proses metanasi. Hasil percobaan menunjukkan bahwa pengoperasian reaktor CSTR dengan waktu retensi 1 hari dan beban organik 8,3 g VS/m3.hari dapat menghasilkan VFA rata-rata 17,3 g/kg VS.hari dengan kisaran 8,36 – 30,59 g/kg VS.hari, sedangkan pengoperasian reaktor UASB pada waktu retensi 2 hari dan beban organik 2,4 kg COD/m3.hari dapat menghasilkan biogas rata-rata 66,3 L/hari dengan kadar metana rata-rata 69,9% atau 0,17 L CH4/g COD reduksi atau 19,06 L CH4/kg VS. Selain itu proses metanasi dapat menurunkan COD terlarut rata-rata 51,2%, dengan konsentrasi efluen COD terlarut  rata-rata 210,1 mg/L dan COD total rata-rata 375,2 mg/L.Kata kunci: asidifikasi, metanasi, CSTR, UASB, biogas

A simple design and operation for the anaerobic treatment of highly concentrated swine waste in the tropics

1995 ◽  
Vol 32 (12) ◽  
pp. 91-97 ◽  
Author(s):  
P. Y. Yang ◽  
M. Kuroshima
Keyword(s):  
Treatment Process ◽  
Total Solid ◽  
Anaerobic Treatment ◽  
Solid Content ◽  
Total Solid Content ◽  
Treatment Processes ◽  
Tropical Conditions ◽  
Biological Reaction ◽  
The Tropics ◽  
Small Producers

In order to develop a simple operation for an anaerobic treatment process for highly concentrated pig wastewater for small producers, a three-stage anaerobic treatment process was investigated. The system provided a series of mixing, homogenization, biological reaction and final stabilization of concentrated pig waste (total solid content of 8–10%). The process provided a stable operational performance, simple operational procedure and well stabilized sludge effluent. It was also found that the system is economically feasible in Hawaii. Compared to the other treatment processes for highly concentrated pig waste, this process is considered as an appropriate alternative for the application of the small producers in land limited and tropical conditions. Also, the present treatment system can be easily developed into a prefabricated package plant which can minimize the on-site labor and building costs.

scholarly journals Heavy metal levels in cattle egrets (Bubulcus ibis) foraging in some abattoirs in Lagos State metropolis

2021 ◽  
Vol 45 (1) ◽  
Author(s):  
Elijah Abakpa Adegbe ◽  
Oluwaseyi Oluwabukola Babajide ◽  
Lois Riyo Maina ◽  
Shola Elijah Adeniji
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Metal Accumulation ◽  
Heavy Metal Contamination ◽  
Heavy Metal Accumulation ◽  
Bubulcus Ibis ◽  
Significant Difference ◽  
Metal Levels ◽  
Lagos State ◽  
The Mean

Abstract Background Heavy metal accumulation in the ecosystem constitutes a potential toxic effect which is hazardous to human health. Increasing environmental pollution has necessitated the use of cattle egrets to evaluate the levels of heavy metal contamination, to establish their use in biomonitoring of heavy metals and to provide data for monitoring pollution in the environment. Results The present study assessed the utilization of Bubulcus ibis in monitoring pollution in five abattoirs, namely Agege, Bariga, Kara, Itire and Idi-Araba, all situated in Lagos State. The concentration of five (5) heavy metals, cadmium (Cd), copper (Cu), nickel (Ni), lead (Pb) and zinc (Zn) was determined in the liver, muscle and feather of Bubulcus ibis using the atomic absorption spectrophotometer. The trend of metal accumulation was in the order: Zn > Cu > Pb > Cd > Ni for all the sampled tissues. The mean tissue concentrations of the metals were significantly different (p < 0.05) among the sites. The highest levels of metal concentration were reported in the liver in all the locations. Mean concentration of Cd in Kara (0.003 ± 0.00058) was significantly (p < 0.05) higher than those found at Agege (0.0013 ± 0.00058) and Idi-Araba (0.001 ± 0.001). A significant difference (p < 0.05) was also observed between the mean concentrations of Cu in Bariga (0.01 ± 0.001) and Idi-Araba (0.003 ± 0.001). Conclusion All the studied heavy metals were present in the liver, muscle and feathers of the cattle egrets. The contamination levels were ascertained from the study which indicated that cattle egrets are useful in biomonitoring studies and the generated data will serve as baseline data which could be compared with data from other locations for monitoring heavy metal pollution.

Sign in / Sign up

Export Citation Format

Share Document