scholarly journals Denuded dwarfs demystified: gas loss from dSph progenitors and implications for the minimum mass of galaxies

2019 ◽  
Vol 486 (2) ◽  
pp. 1964-1984 ◽  
Author(s):  
Nina Ivkovich ◽  
Marshall L McCall
Keyword(s):  
Author(s):  
Ulrich Leuthäusser

In sport climbing, a common method of belaying is to use a static rope brake attached to the belayer’s harness, but the belayer can move freely. This paper investigates the dynamics of a climbing fall with such a belayer. The dynamics are nontrivial because of the belayer’s constraint to be always at or above his initial position. An exact solution for a linear elastic rope is presented. Compared to a fix-point belay, one obtains a considerable force reduction on the belay-chain. However, there is a trade-off of a longer stopping distance of both climber and belayer. In order to calculate the stopping distance, friction between rope and the top carabiner has been taken into account. Closed-form formulas allow for calculating the maximum impact force, as well as the minimum mass of the belayer which is necessary to hold a fall from a certain height.


2021 ◽  
pp. 136943322110262
Author(s):  
Mohammad H Makiabadi ◽  
Mahmoud R Maheri

An enhanced symbiotic organisms search (ESOS) algorithm is developed and presented. Modifications to the basic symbiotic organisms search algorithm are carried out in all three phases of the algorithm with the aim of balancing the exploitation and exploration capabilities of the algorithm. To verify validity and capability of the ESOS algorithm in solving general optimization problems, the CEC2014 set of 22 benchmark functions is first optimized and the results are compared with other metaheuristic algorithms. The ESOS algorithm is then used to optimize the sizing and shape of five benchmark trusses with multiple frequency constraints. The best (minimum) mass, mean mass, standard deviation of the mass, total number of function evaluations, and the values of frequency constraints are then compared with those of a number of other metaheuristic solutions available in the literature. It is shown that the proposed ESOS algorithm is generally more efficient in optimizing the shape and sizing of trusses with dynamic frequency constraints compared to other reported metaheuristic algorithms, including the basic symbiotic organisms search and its other recently proposed improved variants such as the improved symbiotic organisms search algorithm (ISOS) and modified symbiotic organisms search algorithm (MSOS).


Author(s):  
C. Bergmann ◽  
M. I. Jones ◽  
J. Zhao ◽  
A. J. Mustill ◽  
R. Brahm ◽  
...  

Abstract We present 63 new multi-site radial velocity (RV) measurements of the K1III giant HD 76920, which was recently reported to host the most eccentric planet known to orbit an evolved star. We focused our observational efforts on the time around the predicted periastron passage and achieved near-continuous phase coverage of the corresponding RV peak. By combining our RV measurements from four different instruments with previously published ones, we confirm the highly eccentric nature of the system and find an even higher eccentricity of $e=0.8782 \pm 0.0025$ , an orbital period of $415.891^{+0.043}_{-0.039}\,\textrm{d}$ , and a minimum mass of $3.13^{+0.41}_{-0.43}\,\textrm{M}_{\textrm{J}}$ for the planet. The uncertainties in the orbital elements are greatly reduced, especially for the period and eccentricity. We also performed a detailed spectroscopic analysis to derive atmospheric stellar parameters, and thus the fundamental stellar parameters ( $M_*, R_*, L_*$ ), taking into account the parallax from Gaia DR2, and independently determined the stellar mass and radius using asteroseismology. Intriguingly, at periastron, the planet comes to within 2.4 stellar radii of its host star’s surface. However, we find that the planet is not currently experiencing any significant orbital decay and will not be engulfed by the stellar envelope for at least another 50–80 Myr. Finally, while we calculate a relatively high transit probability of 16%, we did not detect a transit in the TESS photometry.


2016 ◽  
Vol 826 (2) ◽  
pp. 148 ◽  
Author(s):  
Andrew Emerick ◽  
Mordecai-Mark Mac Low ◽  
Jana Grcevich ◽  
Andrea Gatto

2015 ◽  
Vol 90 ◽  
pp. 191-201 ◽  
Author(s):  
A. Rashedi ◽  
I. Sridhar ◽  
K.J. Tseng ◽  
N. Srikanth

Processes ◽  
2021 ◽  
Vol 9 (1) ◽  
pp. 111
Author(s):  
Piotr Kopeć ◽  
Beata Niezgoda-Żelasko

The results of optimisation calculations presented in the article are related to longitudinally finned tubes of a heat pump evaporator operating under natural wind-induced flow of outdoor air conditions. The finned surface is characterised by an unusual, wavy fin shape. The article presents the methodology applied to seeking optimal geometric parameters of the finned tube in which thermal calculations were performed by modelling a mixed convection process on the finned surface using the finite volume method. In the case of maximising the heat flow with the minimum mass of the fins, the optimal solution was dominated by the minimum mass of the fins and thus geometric parameters correspond to the number of fins n = 6, fin height h = 0.065 and fin thickness s = 0.0015 m. Optimisation calculations made for maximum efficiency of the exchanger at constant mass indicated that the tube with ten fins (n = 10) with a height of h = 0.11 m and a thickness of s = 0.0018 m allowed maximum heat flow at the assumed mass of the fins in the exchanger tube model. The article proposes a simplified method of determining the optimal geometric parameters of the profile for any mass and maximum thermal efficiency.


2021 ◽  
Vol 23 ◽  
pp. 346-355
Author(s):  
Anatoliy Pavlenko

This work was performed to improve the storage and transportation technology of gas hydrates in nonequilibrium conditions. At atmospheric pressure and positive ambient temperature, they gradually dissociate into gas and water. Simulation of the gas hydrate dissociation will determine optimal conditions for their transportation and storage, as well as minimize gas loss. Thermodynamic parameters of adiabatic processes of forced preservation of pre-cooled gas hydrate blocks with ice layer were determined theoretically and experimentally. Physical and mathematical models of these processes were proposed. The scientific novelty is in establishing quantitative characteristics that describe the gas hydrates thermophysical parameters thermophysical characteristics influence on the heat transfer processes intensity on the interphase surface under conditions of gas hydrates dissociation. Based on the results of experimental studies, approximation dependences for determining the temperature in the depths of a dissociating gas hydrate array have been obtained. Gas hydrates dissociation mathematical model is presented.


Author(s):  
José Alfredo Ramírez Monares ◽  
Jesús Israel Hernández Hernández

The static analysis of the indeterminate three-bar structure is developed using the Castigliano's first theorem, taking the lengths and inclination angles as variables. Some reductions are applied in the resulting set of equations to approximate them to the references models. From now on, the minimum mass optimization model with restrictions is established. Then, the Optimality Criterion linear resizing optimization rule algorithm for the unbounded and bounded design variables is applied in two numerical cases. The analytical and Matlab Optimization Toolbox results are also obtained and they demonstrate the Optimality Criterion linear resizing rule effectiveness in structural optimization with a minimum mass objective and size restrictions.


2020 ◽  
Vol 19 (4) ◽  
pp. 14-29
Author(s):  
A. I. Danilin

We discuss the features of optimal force transfer in a thin-walled structure and use them to develop a method for defining the distribution of material over the structure elements for minimizing its volume. The suggested method works with one or several external loadings and allows one to determine the optimal structure and to recognize the phenomenon of Razani in which a structure with unequal stresses due to several loadings is more light-weight than a fully- stressed one. Using the developed method, we solved the original Razani problem and applied it for the optimization of the wing structure of a novel hypersonic airplane. It is shown that the determined material distribution is 8.78% lighter than that in a conventionally fully-stressed structure.


2021 ◽  
Vol 2021 ◽  
pp. 1-15
Author(s):  
Demin Chen ◽  
Wei Long ◽  
Yanyan Li ◽  
Rui Zhang

The gas loss in sampling is the root of coalbed gas content measurement error. The pressure and particle size have a significant impact on the gas loss. Using the self-developed coal particle pneumatic pipeline transportation experimental system, this study investigated the pressure and particle size changes in the sampling pipeline. It is found that the sampling process can be divided into four stages: no flow field stage, sample outburst stage, stable conveying stage, and tail purging stage. The extreme pressure in the sampling pipeline appears at the sample outburst stage; and the pressure in the pipeline has levelled off after sharp decrease in the stable conveying stage. It is also found that the extreme pressure increases first and then decreases with the increase of particle size. The duration of outburst stage is negatively correlated with particle size, and that of stable conveying stage is positively correlated with particle size. In addition, the results show that the loss rate of 1–3 mm particles is the smallest after the test but that particles less than 1 mm increase by about two times and particles greater than 3 mm decrease by more than three times. The study also shows that the particle size distribution of coal samples is a single peak with left skew distribution, and the gas reverse circulation sampling test does not change the location of the peak but makes it higher and sharper. The single size coal sample is more likely to collide than the mixture. This study can help to advance the understanding of impact factors on gas loss during reverse circulation sampling.


Sign in / Sign up

Export Citation Format

Share Document