The Aegean Sea

We summarize briefly the main features of a kinematic model of evolution of the Aegean area since 13 Ma. The formation of the Aegean Sea by extensional tectonics is related to the subduction of the Mediterranean floor below the Hellenic arc. We then make a quantitative estimate of vertical movements in the Aegean area, on the basis of geological data, and demonstrate that the outer arc was built since the beginning of this episode of subduction by vertical uplift. The easiest way to explain the uplift is by underplating. Finally, we discuss briefly the dynamics of the subduction - marginal sea formation processes in this continental collision framework.

1995 ◽  
Vol 132 (6) ◽  
pp. 637-650 ◽  
Author(s):  
N. Görür ◽  
A. M. C. Sengör ◽  
M. Sakinü ◽  
R. Akkök ◽  
E. Yiğitbaş ◽  
...  

AbstractThe time of the onset and the nature of the extension in the Aegean area have been problematic owing to the confusion of neotectonic replacement structures with neotectonic revolutionary structures. This paper concerns two rift systems of different ages and orientations in the Gökova region of southwestern Anatolia. The first system has a northwest—southeast trend with a Middle to Upper Miocene infill, whereas the second system is orientated in an east—west direction and filled with Plio-Quaternary rocks. Structural and palaeomagnetic data indicate that the first system originally had a north—south trend, and then bodily rotated anticlockwise to its present orientation before the end of the Miocene. Both the orientations and the structural patterns of these cross-cutting rift systems suggest that they resulted from two different and successive tectonic régimes. Regional geology suggests that the generative régime of the older system was characterized by north—south compression and related to the palaeotectonic evolution of southwestern Anatolia, whereas that of the younger system is characterized by north-south extension and relates to the neotectonic evolution of this region. This inference contradicts, at least in southwestern Anatolia, some recent claims that the extensional tectonics and the related rift formation in the Aegean region began in the early Miocene, with the alleged demise of the compressional palaeotectonics during the late Oligocene, but is consistent with older views that placed the onset of north—south extension into the later middle Miocene. The formation of the Aegean Sea seems to be the result of these two complicated and contrasting, succesive tectonic regimes that have affected this region since middle Miocene times.


1984 ◽  
Vol 121 (6) ◽  
pp. 577-587 ◽  
Author(s):  
P. E. R. Lovelock

AbstractThe structure of the northern part of the Arabian platform is reviewed in the light of hitherto unpublished exploration data and the presently accepted kinematic model of plate motion in the region. The Palmyra and Sinjar zones share a common history of development involving two stages of rifting, one in the Triassic–Jurassic and the other during late Cretaceous to early Tertiary times. Deformation of the Palmyra zone during the Mio-Pliocene is attributed to north–south compression on the eastern block of the Dead Sea transcurrent system which occurred after continental collision in the north in southeast Turkey. The asymmetry of the Palmyra zone is believed to result from northward underthrusting along the southern boundary facilitated by the presence of shallow Triassic evaporites. An important NW-SE cross-plate shear zone has been identified, which can be traced for 600 km and which controls the course of the River Euphrates over long distances in Syria and Iraq. Transcurrent motion along this zone resulted in the formation of narrow grabens during the late Cretaceous which were compressed during the Mio-Pliocene. To a large extent, present day structures in the region result from compressional reactivation of old lineaments within the Arabian plate by the transcurrent motion of the Dead Sea fault zone and subsequent continental collision.


1997 ◽  
Vol 40 (1) ◽  
Author(s):  
G. Drakatos ◽  
G. Karantonis ◽  
G. N. Stavrakakis

The three-dimensional velocity structure of the crust in the Aegean sea and the surrounding regions (34.0º-42.OºN, 19.0ºE-29.0ºE) is investigated by inversion of about 10000 residuals of arrival times of P-wave from local events. The resulting velocity structure shows strong horizontal variations due to the complicated crustal structure and the variations of crustal thickness. The northern part of the region generally shows high velocities. In the inner part of the volcanic arc (Southern Aegean area), relatively low velocities are observed, suggesting a large-scale absorption of seismic energy as confirmed by the low seismicity of the region. A low velocity zone was observed along the subduction zone of the region, up to a depth of 4 km. The existence of such a zone could be due to granitic or other intrusions in the crust during the uplift of the region during Alpidic orogenesis.


Author(s):  
Christos Maravelias ◽  
Costas Papaconstantinou

Spatial distribution patterns of black anglerfish, Lophius budegassa were examined in relation to size category, bathymetry, locational covariates, and season. Data were collected during a 2-y period (1998–1999) of quasi-synoptic seasonal sampling using demersal trawl surveys in the Aegean Sea. Generalized additive models (GAMs) were used to test the hypotheses that there was size-related variation in species' habitat associations and that the study area might serve as a nursery ground for black anglerfish. The current results supported these hypotheses. Data are presented that reveal size-dependent aggregation patterns of black anglerfish and an important habitat utilization of the north-eastern Aegean area. The modelled anglerfish abundances showed a strongly non-linear dependence on the explanatory covariates. The different size-classes exhibited significant seasonal effects and preferences for specific regions and distinct water depths. The present results also suggested that 1-y-old fish and potential spawners appeared to concentrate in the vicinity of the same areas. Two main areas of juvenile aggregations were detected in the deeper water regions of the study area on a seabed of around 300 m depth; both emerged in the proximity of the locations of larger fish. The bathymetric distribution of intermediate size anglerfish followed an inverse trend, with fish captured mainly in shallower waters. Results indicated a preferential aggregation of 1-y-old L. budegassa in the study area that is hypothesized to influence the supply of recruits to distant regions of the Aegean Sea.


2017 ◽  
Vol 43 (2) ◽  
pp. 579
Author(s):  
S. Bellas ◽  
H. Keupp

Most of the basal Neogene sediments of Crete Island (South Aegean Sea) were unconformably deposited during synsedimentary extensional tectonics and subsequent transgression on the basement. This work mainly focuses on the marine stratigraphy of south central Crete and specifically on the sedimentary deposits of the Gortys subbasin-area located in the basin of Messara. Four selected profiles north of Gortys ancient ruins (Heraklion Province) are lithostratigraphically presented. Profiles Gortys-1 and -2 (combined to one: 1+2) represent the basal Neogene deposits (older strata-commence of sedimentation) and are interpreted as of fluviatile to lagoonal origin, while profiles Gortys-4 and - 4a are considered the younger, marine development of the Gortys subbasin. Between profiles –4 and –4a are developed evaporites of the Messinian Salinity Crisis (MSC). Profiles are biostratigraphically studied and correlated on the basis of either identified macrofossils or calcareous and siliceous nannofossils. The recorded assemblages range in age from Serravallian-Tortonian to Messinian and Zanclean respectively. The good preservation and abundance of the fossil phytoplankton establishes a well-constrained biostratigraphic framework, which will further contribute to the understanding of the evolution of the Messara sedimentary basin.


2019 ◽  
Vol 39 (4) ◽  
pp. 715-726
Author(s):  
Leiyu Zhang ◽  
Jianfeng Li ◽  
Shuting Ji ◽  
Peng Su ◽  
Chunjing Tao ◽  
...  

Purpose Upper-limb joint kinematics are highly complex and the kinematics of rehabilitation exoskeletons fail to reproduce them, resulting in hyperstaticity and human–machine incompatibility. The purpose of this paper is to design and develop a compatible exoskeleton robot (Co-Exos II) to address these problems. Design/methodology/approach The configuration synthesis of Co-Exos II is completed using advanced mechanism theory. A compatible configuration is selected and four passive joints are introduced into the connecting interfaces based on optimal configuration principles. A Co-Exos II prototype with nine degrees of freedom (DOFs) is developed and still owns a compact structure and volume. A new approach is presented to compensate the vertical glenohumeral (GH) movements. Co-Exos II and the upper arm are simplified as a guide-bar mechanism at the elevating plane. The theoretical displacements of passive joints are calculated by the kinematic model of the shoulder loop. The compatible experiments are completed to measure the kinematics of passive joints. Findings The compatible configuration of the passive joints can effectively reduce the gravity influences of the exoskeleton device and the upper extremities. The passive joints exhibit excellent compensation effect for the GH joint movements by comparing the theoretical and measured results. Passive joints can compensate for most GH movements, especially vertical movements. Originality/value Co-Exos II possesses good human–machine compatibility and wearable comfort for the affected upper limbs. The proposed compensation method is convenient to therapists and stroke patients during the rehabilitation trainings.


2020 ◽  
Author(s):  
Christoph Glotzbach ◽  
Paul Eizenhoefer ◽  
Jonas Kley ◽  
Todd A. Ehlers

<p>Changes in the deep lithosphere (e.g., slab break-off or a switch in subduction polarity) potentially result in orogen-wide structural reorientations and changes in the pace and location of exhumation and Earth surface processes. In this project we combine bedrock thermochronology and balanced cross sections with thermo-kinematic modelling to reconstruct the cooling and exhumation history along geophysical profiles crossing the Central and Eastern Alps. Available thermochronological data together with new apatite and zircon (U-Th)/He ages taken along the NFP-20E, TRANSALP and EASI profile is used to test and improve existing across-strike, orogen-wide balanced cross sections. This ‘structural thermochronology’ method yields reliable information about the structural and kinematic evolution of the Alps since continental collision. As an example, thermochronological data along TRANSALP can be fitted with a kinematic model suggested by balanced cross sections and both datasets suggest a general shift from pro- to retro-wedge deformation, potentially related to a switch in subduction polarity.</p>


Ocean Science ◽  
2011 ◽  
Vol 7 (5) ◽  
pp. 671-683 ◽  
Author(s):  
L. Perivoliotis ◽  
G. Krokos ◽  
K. Nittis ◽  
G. Korres

Abstract. As part of the integrated ECOOP (European Coastal Sea Operational observing and Forecasting System) project, HCMR upgraded the already existing standalone Oil Spill Forecasting System for the Aegean Sea, initially developed for the Greek Operational Oceanography System (POSEIDON), into an active element of the European Decision Support System (EuroDeSS). The system is accessible through a user friendly web interface where the case scenarios can be fed into the oil spill drift model component, while the synthetic output contains detailed information about the distribution of oil spill particles and the oil spill budget and it is provided both in text based ECOOP common output format and as a series of sequential graphics. The main development steps that were necessary for this transition were the modification of the forcing input data module in order to allow the import of other system products which are usually provided in standard formats such as NetCDF and the transformation of the model's calculation routines to allow use of current, density and diffusivities data in z instead of sigma coordinates. During the implementation of the Aegean DeSS, the system was used in operational mode in order to support the Greek marine authorities in handling a real accident that took place in North Aegean area. Furthermore, the introduction of common input and output files by all the partners of EuroDeSS extended the system's interoperability thus facilitating data exchanges and comparison experiments.


2017 ◽  
Vol 47 (2) ◽  
pp. 647 ◽  
Author(s):  
D. Sakellariou ◽  
J. Mascle ◽  
V. Lykousis

Recently acquired offshore seismic and swath bathymetry data from the Hellenic Arc, the Ionian Sea and the South and North Aegean Sea, including the Hellenic Volcanic Arc and the Cyclades plateau, along with geological and tectonic data from Plio-Quaternary basins exposed on the Hellenic Arc indicate that strike slip tectonics has played a major role in the southwestward extension of the Aegean crustal block, the development of the offshore neotectonic basins and the spatial distribution of the volcanic activity along the Volcanic Arc. Transtensional deformation, accommodated by (sinistral or dextral) strike slip zones and related extensional structures, prevail throughout Plio-Quaternary, since the North Anatolian Fault broke westwards into the North Aegean. Incipient collision of the Hellenic Forearc south of Crete with the Libyan promontory and consequent lateral escape tectonics led to the segmentation of the Hellenic Arc in distinct blocks, which move southwestwards independently from each other and are bounded by strike slip faults.


Sign in / Sign up

Export Citation Format

Share Document