scholarly journals Bacterial factors influencing adhesion of Pseudomonas aeruginosa strains to a poly(ethylene oxide) brush

Microbiology ◽  
2006 ◽  
Vol 152 (9) ◽  
pp. 2673-2682 ◽  
Author(s):  
Astrid Roosjen ◽  
Henk J. Busscher ◽  
Willem Norde ◽  
Henny C. van der Mei
Keyword(s):  
Pseudomonas Aeruginosa ◽  
Ethylene Oxide ◽  
Cell Surface Hydrophobicity ◽  
Surface Hydrophobicity ◽  
Contact Angles ◽  
Bacterial Strains ◽  
Water Contact ◽  
Poly Ethylene Oxide ◽  
Poly Ethylene ◽  
Brush Coating

Most bacterial strains adhere poorly to poly(ethylene oxide) (PEO)-brush coatings, with the exception of a Pseudomonas aeruginosa strain. The aim of this study was to find factors determining whether P. aeruginosa strains do or do not adhere to a PEO-brush coating in a parallel plate flow chamber. On the basis of their adhesion, a distinction could be made between three adhesive and three non-adhesive strains of P. aeruginosa, while bacterial motilities and zeta potentials were comparable for all six strains. However, water contact angles indicated that the adhesive strains were much more hydrophobic than the non-adhesive strains. Furthermore, only adhesive strains released surfactive extracellular substances, which may be engaged in attractive interactions with the PEO chains. Atomic force microscopy showed that the adhesion energy, measured from the retract curves of a bacterial-coated cantilever from a brush coating, was significantly more negative for adhesive strains than for non-adhesive strains (P<0.001). Through surface thermodynamic and extended-DLVO (Derjaguin, Landau, Verwey, Overbeek) analyses, these stronger adhesion energies could be attributed to acid–base interactions. However, the energies of adhesion of all strains to a brush coating were small when compared with their energies of adhesion to a glass surface. Accordingly, even the adhesive P. aeruginosa strains could be easily removed from a PEO-brush coating by the passage of a liquid–air interface. In conclusion, cell surface hydrophobicity and surfactant release are the main factors involved in adhesion of P. aeruginosa strains to PEO-brush coatings.

Surface Modification of PEOT/PBT Membrane with Silk Fibroin Anchoring and its Potential Application in Artificial Salivary Gland Construct

2012 ◽  
Vol 538-541 ◽  
pp. 52-59
Author(s):  
Jie Zhu ◽  
Ming Shi Li ◽  
Li Qun Wang ◽  
Xiao Lin Zhu
Keyword(s):  
Salivary Gland ◽  
Silk Fibroin ◽  
Potential Application ◽  
Contact Angles ◽  
Water Contact ◽  
Polar Groups ◽  
Poly Ethylene Oxide ◽  
Poly Ethylene ◽  
Surface Modified

We reported the preparation of surface modified poly (ethylene oxide terephthalate) - poly (butylene terephthalate) membrane by the method of silk fibroin anchoring, namely SF/(PEOT/PBT). Its surface properties were characterized by contact angles and XPS and the biocompatibility of the composite membrane was further evaluated by human salivary epithelial cells (HSG cells) growth in vitro. Results revealed that SF/(PEOT/PBT) possessed the low water contact angle (48.0±3.0°) and immobilized a great amount of fibroin (fibroin surface coverage: 26.39 wt%), which attributed to the formation of polar groups such as hydrosulfide group, sulfonic group, carboxyl and carbonyl ones in the process of SO2 plasma treatment. HSG cells growth in vitro indicated that the silk fibroin anchoring could significantly enhance the biocompatibility of PEOT/PBT membrane, which suggested the potential application of fibroin anchoring PEOT/PBT for clinical HSG cells transplantation in the artificial salivary gland construct.

The Use of X-Ray Photoelectron Spectroscopy for the Study of Oral Streptococcal Cell Surfaces

1997 ◽  
Vol 11 (4) ◽  
pp. 388-394 ◽  
Author(s):  
H.C. Van Der Mei ◽  
H.J. Busscher
Keyword(s):  
Cell Surface ◽  
Photoelectron Spectroscopy ◽  
Surface Composition ◽  
Cell Surface Hydrophobicity ◽  
Surface Hydrophobicity ◽  
Contact Angles ◽  
Microbial Cell ◽  
Cell Surfaces ◽  
Water Contact ◽  
X Ray

Physicochemical and structural properties of microbial cell surfaces play an important role in their adhesion to surfaces and are determined by the chemical composition of the outermost cell surface. Many traditional methods used to determine microbial cell wall composition require fractionation of the organisms and consequently do not yield information about the composition of the outermost cell surface. X-ray photoelectron spectroscopy (XPS) measures the elemental composition of the outermost cell surfaces of micro-organisms. The technique requires freeze-drying of the organisms, but, nevertheless, elemental surface concentration ratios of oral streptococcal cell surfaces with peritrichously arranged surface structures showed good relationships with physicochemical properties measured under physiological conditions, such as zeta potentials. Isoelectric points ap-peared to be governed by the relative abundance of oxygen- and nitrogen-containing groups on the cell surfaces. Also, the intrinsic microbial cell-surface hydrophobicity by water contact angles related to the cell-surface composition as by XPS and was highest for strains with an elevated isoelectric point. Inclusion of elemental surface compositions for tufted streptococcal strains caused deterioration of the relationships found. Interestingly, hierarchical cluster analysis on the basis of the elemental surface compositions revealed that, of 36 different streptococcal strains, only four S. rattus as well as nine S. mitis strains were located in distinct groups, well separated from the other streptococcal strains, which were all more or less mixed in one group.

The Structure of Radiation Cross-Linked Poly (ethylene oxide) Gels

1971 ◽  
Vol 29 ◽  
pp. 76-77
Author(s):  
C. E. Cluthe ◽  
G. G. Cocks
Keyword(s):  
Molecular Weight ◽  
Ethylene Oxide ◽  
Parallel Plate ◽  
Average Molecular Weight ◽  
Radical Reaction ◽  
Free Radical Reaction ◽  
Nitrogen Gas ◽  
Poly Ethylene Oxide ◽  
Poly Ethylene ◽  
Initial Viscosity

Aqueous solutions of a 1 weight-per cent poly (ethylene oxide) (PEO) were degassed under vacuum, transferred to a parallel plate viscometer under a nitrogen gas blanket, and exposed to Co60 gamma radiation. The Co60 source was rated at 4000 curies, and the dose ratewas 3.8x105 rads/hr. The poly (ethylene oxide) employed in the irradiations had an initial viscosity average molecular weight of 2.1 x 106.The solutions were gelled by a free radical reaction with dosages ranging from 5x104 rads to 4.8x106 rads.

Preparation of Organized Mesoporous Silica from Sodium Metasilicate Solutions in Alkaline Medium Using Nonionic Surfactants

2003 ◽  
Vol 68 (10) ◽  
pp. 2019-2031 ◽  
Author(s):  
Markéta Zukalová ◽  
Jiří Rathouský ◽  
Arnošt Zukal
Keyword(s):  
Mesoporous Silica ◽  
Ethylene Oxide ◽  
Sodium Metasilicate ◽  
Spherical Particles ◽  
Structure Directing Agent ◽  
Inorganic Species ◽  
Poly Ethylene Oxide ◽  
Acidic Conditions ◽  
Poly Ethylene ◽  
Hydrolysis Of

A new procedure has been developed, which is based on homogeneous precipitation of organized mesoporous silica from an aqueous solution of sodium metasilicate and a nonionic poly(ethylene oxide) surfactant serving as a structure-directing agent. The decrease in pH, which induces the polycondensation of silica, is achieved by hydrolysis of ethyl acetate. Owing to the complexation of Na+ cations by poly(ethylene oxide) segments, assembling of the mesostructure appears to occur under electrostatic control by the S0Na+I- pathway, where S0 and I- are surfactant and inorganic species, respectively. As the complexation of Na+ cations causes extended conformation of poly(ethylene oxide) segments, the pore size and pore volume of organized mesoporous silica increase in comparison with materials prepared under neutral or acidic conditions. The assembling of particles can be fully separated from their solidification, which results in the formation of highly regular spherical particles of mesoporous silica.

Sign in / Sign up

Export Citation Format

Share Document