scholarly journals Methods for the Refolding of Disulfide-Rich Proteins

2017 ◽  
Author(s):  
Christopher N Haggarty-Weir ◽  
Roma Galloway ◽  
William Godfrey
Keyword(s):  
Genetic Manipulation ◽  
Small Scale ◽  
Resonance Spectroscopy ◽  
E Coli ◽  
Enzymatic Function ◽  
Sds Page ◽  
Reduced And Oxidized Glutathione ◽  
Scale Test ◽  
Bacterial Cytoplasm

AbstractEschericia coli remains the workhorse producing recombinant proteins given its ease of handling, access and genetic manipulation using standard laboratory techniques. However, disulfide-rich proteins can be difficult to produce in E. coli, in large part due to the reducing environment of the bacterial cytoplasm. Refolding from insoluble inclusion bodies can be a viable strategy for generating substantial quantities of disulfide-rich protein. For the best chance of successfully refolding a protein, it is vital to carry out a variety of small-scale test refolds under a swathe of conditions including altering the concentration of urea, salts, reduced and oxidized glutathione, temperature, length of refold time and protein dilution factor. Once a protein has undergone refolding it is vital to determine that the final product is natively folded given the chance of soluble misfolded protein. For determination of correct folding, a variety of techniques can be employed, and ideally, numerous should be used together. For proteins that possess enzymatic function the gold standard to assess correct folding is an activity assay. Non-enzymatic proteins can be assessed using a combination of circular dichroism and nuclear magnetic resonance spectroscopy. These techniques should be utilized alongside mass spectrometry, Western blotting and SDS-PAGE.

Concentration determination of chromatin in unstained resin-embedded sections by means of Z-contrast in STEM

1990 ◽  
Vol 48 (2) ◽  
pp. 186-187
Author(s):  
M. Haider ◽  
B. Bohrmann
Keyword(s):  
Energy Loss ◽  
Freeze Substitution ◽  
Biological Macromolecules ◽  
Local Concentration ◽  
E Coli ◽  
Concentration Determination ◽  
Phosphorous Content ◽  
Z Contrast ◽  
Electron Energy Loss

The technique of Z-contrast in STEM offers the possibility to determine the local concentration of macromolecules like lipids, proteins or DNA. Contrast formation depends on the atomic composition of the particular structure. In the case of DNA, its phosphorous content discriminates it from other biological macromolecules. In our studies, sections of E. coli, the dinoflagellate Amphidinium carterae and Euglena spec. cells were used which were obtained by cryofixation followed by freeze-substitution into acetone with 3% glutaraldehyde. The samples were then embedded either in Lowicryl HM20 at low temperature or in Epon at high temperature. Sections were coated on both sides with 30Å carbon.The DF- and the inelastic image have been recorded simultaneously with a Cryo-STEM. This Cryo-STEM is equipped with a highly dispersive Electron Energy Loss Spectrometer. With this instrument pure Z-contrast can be achieved either with a Filtered DF-image divided by the inelastic image or, as is used in this paper, by dividing the conventional DF-image by an inelastic image which has been recorded with an inelastic detector whose response is dependent on the total energy loss of the inelastically scattered electrons.

Co-expression of recombinant single chain variable fragment recognizing blood antigen fused with sumo and chaperones in Escherichia coli

2018 ◽  
Vol 40 (4) ◽  
Author(s):  
Dang Thi Ngoc Ha ◽  
Le Thi Thu Hong ◽  
Truong Nam Hai
Keyword(s):  
Recombinant Antibody ◽  
Blood Type ◽  
Soluble Form ◽  
Supernatant Fraction ◽  
Blood Group Antigens ◽  
Single Chain ◽  
E Coli ◽  
Recombinant Scfv ◽  
Single Chain Variable Fragments

Single chain variable fragments (scFv) have widely been used in research, diagnosis and treatment, but the scFv is considered as difficult protein for expression in E. coli. In previous studies, we expressed a construction of recombinant single chain variable fragments again antigen specific for blood type A (antiA-scFv) individually or fused with Trx or SUMO. However, soluble fraction was low abandant and only approximately 40% when fused with Trx, the other cases were expressed in form of inclusion body. Therefore, it was difficult for purification, refolding and activity assesment. In thispaper, we demonstrated a suitable construction for soluble production of antiA-scFv fused with SUMO (SM/antiA-scFv) in presence of chaparones. Under fermentation with 0.1 mM IPTG at 20oC, the SM/antiA-scFv was entirely expressed in soluble form. Importantly, after cleavage from SUMO with SUMOprotease, antiA-scFv was still maintained in the supernatant fraction. Therefore, it can help ensure bioactivity and is useful for purification process. To the best of our knowledge, this is the first report showing soluble recombinant scFv fused with SUMO in presence of chaperone for determination of blood group antigens. Thus, this result facilitates the optimal study of soluble expression, purification and bioactivity determination of the antiA-scFv recombinant antibody. 

Study of Multiaspect and Multistatic Sonar Systems Using a Small-Scale Test Bed

2010 ◽  
Author(s):  
Jon La Follett ◽  
John Stroud ◽  
Pat Malvoso ◽  
Joseph Lopes ◽  
Raymond Lim ◽  
...  
Keyword(s):  
Small Scale ◽  
Test Bed ◽  
Sonar Systems ◽  
Scale Test

Identification of N-Substituted Triazolo-azetidines as Novel Antibacterials using pDualrep2 HTS Platform

2019 ◽  
Vol 22 (5) ◽  
pp. 346-354
Author(s):  
Yan A. Ivanenkov ◽  
Renat S. Yamidanov ◽  
Ilya A. Osterman ◽  
Petr V. Sergiev ◽  
Vladimir A. Aladinskiy ◽  
...  
Keyword(s):  
Antibacterial Activity ◽  
Large Scale ◽  
Underlying Mechanism ◽  
Luciferase Assay ◽  
Reporter System ◽  
E Coli ◽  
Starting Point ◽  
High Concentrations ◽  
Mic Value

Aim and Objective: Antibiotic resistance is a serious constraint to the development of new effective antibacterials. Therefore, the discovery of the new antibacterials remains one of the main challenges in modern medicinal chemistry. This study was undertaken to identify novel molecules with antibacterial activity. Materials and Methods: Using our unique double-reporter system, in-house large-scale HTS campaign was conducted for the identification of antibacterial potency of small-molecule compounds. The construction allows us to visually assess the underlying mechanism of action. After the initial HTS and rescreen procedure, luciferase assay, C14-test, determination of MIC value and PrestoBlue test were carried out. Results: HTS rounds and rescreen campaign have revealed the antibacterial activity of a series of Nsubstituted triazolo-azetidines and their isosteric derivatives that has not been reported previously. Primary hit-molecule demonstrated a MIC value of 12.5 µg/mL against E. coli Δ tolC with signs of translation blockage and no SOS-response. Translation inhibition (26%, luciferase assay) was achieved at high concentrations up to 160 µg/mL, while no activity was found using C14-test. The compound did not demonstrate cytotoxicity in the PrestoBlue assay against a panel of eukaryotic cells. Within a series of direct structural analogues bearing the same or bioisosteric scaffold, compound 2 was found to have an improved antibacterial potency (MIC=6.25 µg/mL) close to Erythromycin (MIC=2.5-5 µg/mL) against the same strain. In contrast to the parent hit, this compound was more active and selective, and provided a robust IP position. Conclusion: N-substituted triazolo-azetidine scaffold may be used as a versatile starting point for the development of novel active and selective antibacterial compounds.

Enhanced Biocatalytic Activity of Recombinant Lipase Immobilized on Gold Nanoparticles

2019 ◽  
Vol 20 (6) ◽  
pp. 497-505 ◽  
Author(s):  
Abeer M. Abd El-Aziz ◽  
Mohamed A. Shaker ◽  
Mona I. Shaaban
Keyword(s):  
Gold Nanoparticles ◽  
Lipolytic Activity ◽  
Market Demand ◽  
Biotechnological Applications ◽  
Lipase Gene ◽  
Expression Plasmid ◽  
E Coli ◽  
Nickel Affinity Chromatography ◽  
Recombinant Production ◽  
Sds Page

Background: Bacterial lipases especially Pseudomonas lipases are extensively used for different biotechnological applications. Objectives: With the better understanding and progressive needs for improving its activity in accordance with the growing market demand, we aimed in this study to improve the recombinant production and biocatalytic activity of lipases via surface conjugation on gold nanoparticles. Methods: The full length coding sequences of lipase gene (lipA), lipase specific foldase gene (lipf) and dual cassette (lipAf) gene were amplified from the genomic DNA of Pseudomonas aeruginosa PA14 and cloned into the bacterial expression vector pRSET-B. Recombinant lipases were expressed in E. coli BL-21 (DE3) pLysS then purified using nickel affinity chromatography and the protein identity was confirmed using SDS-PAGE and Western blot analysis. The purified recombinant lipases were immobilized through surface conjugation with gold nanoparticles and enzymatic activity was colorimetrically quantified. Results: Here, two single expression plasmid systems pRSET-B-lipA and pRSET-B-lipf and one dual cassette expression plasmid system pRSET-B-lipAf were successfully constructed. The lipolytic activities of recombinant lipases LipA, Lipf and LipAf were 4870, 426 and 6740 IUmg-1, respectively. However, upon immobilization of these recombinant lipases on prepared gold nanoparticles (GNPs), the activities were 7417, 822 and 13035 IUmg-1, for LipA-GNPs, Lipf-GNPs and LipAf-GNPs, respectively. The activities after immobilization have been increased 1.52 and 1.93 -fold for LipA and LipAf, respectively. Conclusion: The lipolytic activity of recombinant lipases in the bioconjugate was significantly increased relative to the free recombinant enzyme where immobilization had made the enzyme attain its optimum performance.

Characterization of Glycoprotein Fraction from Carp Pituitaries Isolated Using Concanavalin A as the Affinity Ligand

1998 ◽  
Vol 63 (3) ◽  
pp. 434-440 ◽  
Author(s):  
Irena Hulová ◽  
Jana Barthová ◽  
Helena Ryšlavá ◽  
Václav Kašička
Keyword(s):  
Concanavalin A ◽  
Reversed Phase ◽  
Amino Acid Sequences ◽  
Gel Chromatography ◽  
Affinity Ligand ◽  
Sds Page ◽  
Terminal Amino ◽  
Α And Β Subunits

Glycoproteins that have affinity to Concanavalin A were isolated from the acetone-dried pituitaries of common carp (Cyprinus carpio L.). Two fractions of glycoproteins were separated using gel chromatography on Superdex 75HR. The fraction with lower molecular weight (30 000) corresponding to the carp gonadotropin cGtH II was composed of two subunits as determined using SDS-PAGE. This protein fraction was further divided into four components using reversed-phase HPLC. Two fractions were pure α and β subunits of cGtH II as follows from immunodetection and from determination of N-terminal amino acid sequences. The other two were a mixture of α and β subunits as was also revealed by N-terminal analysis. Capillary electrophoresis was also used for characterization of isolated glycoproteins.

scholarly journals Optical Characterization of Ultra-Thin Films of Azo-Dye-Doped Polymers Using Ellipsometry and Surface Plasmon Resonance Spectroscopy

Photonics ◽  
2021 ◽  
Vol 8 (2) ◽  
pp. 41
Author(s):  
Najat Andam ◽  
Siham Refki ◽  
Hidekazu Ishitobi ◽  
Yasushi Inouye ◽  
Zouheir Sekkat
Keyword(s):  
Refractive Index ◽  
Optical Properties ◽  
Surface Plasmon Resonance ◽  
Surface Plasmon ◽  
Spectroscopic Ellipsometry ◽  
Plasmon Resonance ◽  
Complex Refractive Index ◽  
Resonance Spectroscopy ◽  
Doped Polymers

The determination of optical constants (i.e., real and imaginary parts of the complex refractive index (nc) and thickness (d)) of ultrathin films is often required in photonics. It may be done by using, for example, surface plasmon resonance (SPR) spectroscopy combined with either profilometry or atomic force microscopy (AFM). SPR yields the optical thickness (i.e., the product of nc and d) of the film, while profilometry and AFM yield its thickness, thereby allowing for the separate determination of nc and d. In this paper, we use SPR and profilometry to determine the complex refractive index of very thin (i.e., 58 nm) films of dye-doped polymers at different dye/polymer concentrations (a feature which constitutes the originality of this work), and we compare the SPR results with those obtained by using spectroscopic ellipsometry measurements performed on the same samples. To determine the optical properties of our film samples by ellipsometry, we used, for the theoretical fits to experimental data, Bruggeman’s effective medium model for the dye/polymer, assumed as a composite material, and the Lorentz model for dye absorption. We found an excellent agreement between the results obtained by SPR and ellipsometry, confirming that SPR is appropriate for measuring the optical properties of very thin coatings at a single light frequency, given that it is simpler in operation and data analysis than spectroscopic ellipsometry.

Sign in / Sign up

Export Citation Format

Share Document