scholarly journals A Two-Part Strategy using Genomic Selection in Hybrid Crop Breeding Programs

2020 ◽  
Author(s):  
Owen Powell ◽  
R. Chris Gaynor ◽  
Gregor Gorjanc ◽  
Christian R. Werner ◽  
John M. Hickey
Keyword(s):  
Genomic Selection ◽  
Genetic Gain ◽  
Genetic Variance ◽  
New Technologies ◽  
Stochastic Simulations ◽  
Practical Implementation ◽  
Crop Breeding ◽  
Breeding Programs ◽  
Multiple Generations

AbstractHybrid crop breeding programs using a two-part strategy produced the most genetic gain, but a maximum avoidance of inbreeding crossing scheme was required to increase long-term genetic gain. The two-part strategy uses outbred parents to complete multiple generations per year to reduce the generation interval of hybrid crop breeding programs. The maximum avoidance of inbreeding crossing scheme manages genetic variance by maintaining uniform contributions and inbreeding coefficients across all crosses. This study performed stochastic simulations to quantify the potential of a two-part strategy in combination with two crossing schemes to increase the rate of genetic gain in hybrid crop breeding programs. The two crossing schemes were: (i) a circular crossing scheme, and (ii) a maximum avoidance of inbreeding crossing scheme. The results from this study show that the implementation of genomic selection increased the rate of genetic gain, and that the two-part hybrid crop breeding program generated the highest genetic gain. This study also shows that the maximum avoidance of inbreeding crossing scheme increased long-term genetic gain in two-part hybrid crop breeding programs completing multiple selection cycles per year, as a result of maintaining higher levels of genetic variance over time. The flexibility of the two-part strategy offers further opportunities to integrate new technologies to further increase genetic gain in hybrid crop breeding programs, such as the use of outbred training populations. However, the practical implementation of the two-part strategy will require the development of bespoke transition strategies to fundamentally change the data, logistics, and infrastructure that underpin hybrid crop breeding programs.Key messageHybrid crop breeding programs using a two-part strategy produced the most genetic gain by using outbred parents to complete multiple generations per year. However, a maximum avoidance of inbreeding crossing scheme was required to manage genetic variance and increase long-term genetic gain.

scholarly journals A hybrid optimal contribution approach to drive short-term gains while maintaining long-term sustainability in a modern plant breeding program

2020 ◽  
Author(s):  
Nicholas Santantonio ◽  
Kelly Robbins
Keyword(s):  
Plant Breeding ◽  
Genomic Selection ◽  
Genetic Gain ◽  
Genetic Variance ◽  
Hybrid Approach ◽  
Breeding Program ◽  
Short Term ◽  
Breeding Programs ◽  
Plant Breeding Program

1AbstractPlant breeding programs must adapt genomic selection to an already complex system. Inbred or hybrid plant breeding programs must make crosses, produce inbred individuals, and phenotype inbred lines or their hybrid test-crosses to select and validate superior material for product release. These products are few, and while it is clear that population improvement is necessary for continued genetic gain, it may not be sufficient to generate superior products. Rapid-cycle recurrent truncation genomic selection has been proposed to increase genetic gain by reducing generation time. This strategy has been shown to increase short-term gains, but can quickly lead to loss of genetic variance through inbreeding as relationships drive prediction. The optimal contribution of each individual can be determined to maximize gain in the following generation while limiting inbreeding. While optimal contribution strategies can maintain genetic variance in later generations, they suffer from a lack of short-term gains in doing so. We present a hybrid approach that branches out yearly to push the genetic value of potential varietal materials while maintaining genetic variance in the recurrent population, such that a breeding program can achieve short-term success without exhausting long-term potential. Because branching increases the genetic distance between the phenotyping pipeline and the recurrent population, this method requires sacrificing some trial plots to phenotype materials directly out of the recurrent population. We envision the phenotypic pipeline not only for selection and validation, but as an information generator to build predictive models and develop new products.

scholarly journals Improving short and long term genetic gain by accounting for within family variance in optimal cross selection

2019 ◽  
Author(s):  
Antoine Allier ◽  
Christina Lehermeier ◽  
Alain Charcosset ◽  
Laurence Moreau ◽  
Simon Teyssèdre
Keyword(s):  
Genetic Diversity ◽  
Genomic Selection ◽  
Genetic Gain ◽  
Family Selection ◽  
Breeding Programs ◽  
Short And Long Term ◽  
Inbreeding Rate ◽  
Genetic Value ◽  
Optimal Set

AbstractThe implementation of genomic selection in recurrent breeding programs raised several concerns, especially that a higher inbreeding rate could compromise the long term genetic gain. An optimized mating strategy that maximizes the performance in progeny and maintains diversity for long term genetic gain on current and yet unknown future targets is essential. The optimal cross selection approach aims at identifying the optimal set of crosses maximizing the expected genetic value in the progeny under a constraint on diversity in the progeny. Usually, optimal cross selection does not account for within family selection, i.e. the fact that only a selected fraction of each family serves as candidate parents of the next generation. In this study, we consider within family variance accounting for linkage disequilibrium between quantitative trait loci to predict the expected mean performance and the expected genetic diversity in the selected progeny of a set of crosses. These predictions rely on the method called usefulness criterion parental contribution (UCPC). We compared UCPC based optimal cross selection and optimal cross selection in a long term simulated recurrent genomic selection breeding program considering overlapping generations. UCPC based optimal cross selection proved to be more efficient to convert the genetic diversity into short and long term genetic gains than optimal cross selection. We also showed that using the UCPC based optimal cross selection, the long term genetic gain can be increased with only limited reduction of the short term commercial genetic gain.

scholarly journals Genomic Selection for Any Dairy Breeding Program via Optimized Investment in Phenotyping and Genotyping

2021 ◽  
Vol 12 ◽  
Author(s):  
Jana Obšteter ◽  
Janez Jenko ◽  
Gregor Gorjanc
Keyword(s):  
Genomic Selection ◽  
Genetic Gain ◽  
Breeding Program ◽  
Progeny Testing ◽  
Initial Training ◽  
Training Population ◽  
Breeding Programs ◽  
Use Of Resources ◽  
Dairy Cattle Breeding ◽  
Close Relatives

This paper evaluates the potential of maximizing genetic gain in dairy cattle breeding by optimizing investment into phenotyping and genotyping. Conventional breeding focuses on phenotyping selection candidates or their close relatives to maximize selection accuracy for breeders and quality assurance for producers. Genomic selection decoupled phenotyping and selection and through this increased genetic gain per year compared to the conventional selection. Although genomic selection is established in well-resourced breeding programs, small populations and developing countries still struggle with the implementation. The main issues include the lack of training animals and lack of financial resources. To address this, we simulated a case-study of a small dairy population with a number of scenarios with equal available resources yet varied use of resources for phenotyping and genotyping. The conventional progeny testing scenario collected 11 phenotypic records per lactation. In genomic selection scenarios, we reduced phenotyping to between 10 and 1 phenotypic records per lactation and invested the saved resources into genotyping. We tested these scenarios at different relative prices of phenotyping to genotyping and with or without an initial training population for genomic selection. Reallocating a part of phenotyping resources for repeated milk records to genotyping increased genetic gain compared to the conventional selection scenario regardless of the amount and relative cost of phenotyping, and the availability of an initial training population. Genetic gain increased by increasing genotyping, despite reduced phenotyping. High-genotyping scenarios even saved resources. Genomic selection scenarios expectedly increased accuracy for young non-phenotyped candidate males and females, but also proven females. This study shows that breeding programs should optimize investment into phenotyping and genotyping to maximize return on investment. Our results suggest that any dairy breeding program using conventional progeny testing with repeated milk records can implement genomic selection without increasing the level of investment.

scholarly journals Strategies to assure optimal trade-offs among competing objectives for genetic improvement of soybean

2021 ◽  
Author(s):  
Vishnu Ramasubramanian ◽  
William Beavis
Keyword(s):  
Genomic Selection ◽  
Genetic Improvement ◽  
Genetic Variance ◽  
Breeding Strategies ◽  
Short Term ◽  
Genetic Gains ◽  
Mating Design ◽  
Genetic Potential ◽  
Breeding Populations

AbstractPlant breeding is a decision making discipline based on understanding project objectives. Genetic improvement projects can have two competing objectives: maximize rate of genetic improvement and minimize loss of useful genetic variance. For commercial plant breeders competition in the marketplace forces greater emphasis on maximizing immediate genetic improvements. In contrast public plant breeders have an opportunity, perhaps an obligation, to place greater emphasis on minimizing loss of useful genetic variance while realizing genetic improvements. Considerable research indicates that short term genetic gains from Genomic Selection (GS) are much greater than Phenotypic Selection (PS), while PS provides better long term genetic gains because PS retains useful genetic diversity during the early cycles of selection. With limited resources must a soybean breeder choose between the two extreme responses provided by GS or PS? Or is it possible to develop novel breeding strategies that will provide a desirable compromise between the competing objectives? To address these questions, we decomposed breeding strategies into decisions about selection methods, mating designs and whether the breeding population should be organized as family islands. For breeding populations organized into islands decisions about possible migration rules among family islands were included. From among 60 possible strategies, genetic improvement is maximized for the first five to ten cycles using GS, a hub network mating design in breeding populations organized as fully connected family islands and migration rules allowing exchange of two lines among islands every other cycle of selection. If the objectives are to maximize both short-term and long-term gains, then the best compromise strategy is similar except a genomic mating design, instead of a hub networked mating design, is used. This strategy also resulted in realizing the greatest proportion of genetic potential of the founder populations. Weighted genomic selection applied to both non-isolated and island populations also resulted in realization of the greatest proportion of genetic potential of the founders, but required more cycles than the best compromise strategy.

scholarly journals Strategies to Assure Optimal Trade-Offs Among Competing Objectives for the Genetic Improvement of Soybean

2021 ◽  
Vol 12 ◽  
Author(s):  
Vishnu Ramasubramanian ◽  
William D. Beavis
Keyword(s):  
Genomic Selection ◽  
Genetic Improvement ◽  
Genetic Variance ◽  
Phenotypic Selection ◽  
Breeding Strategies ◽  
Short Term ◽  
Mating Design ◽  
Breeding Populations ◽  
Hub Network

Plant breeding is a decision-making discipline based on understanding project objectives. Genetic improvement projects can have two competing objectives: maximize the rate of genetic improvement and minimize the loss of useful genetic variance. For commercial plant breeders, competition in the marketplace forces greater emphasis on maximizing immediate genetic improvements. In contrast, public plant breeders have an opportunity, perhaps an obligation, to place greater emphasis on minimizing the loss of useful genetic variance while realizing genetic improvements. Considerable research indicates that short-term genetic gains from genomic selection are much greater than phenotypic selection, while phenotypic selection provides better long-term genetic gains because it retains useful genetic diversity during the early cycles of selection. With limited resources, must a soybean breeder choose between the two extreme responses provided by genomic selection or phenotypic selection? Or is it possible to develop novel breeding strategies that will provide a desirable compromise between the competing objectives? To address these questions, we decomposed breeding strategies into decisions about selection methods, mating designs, and whether the breeding population should be organized as family islands. For breeding populations organized into islands, decisions about possible migration rules among family islands were included. From among 60 possible strategies, genetic improvement is maximized for the first five to 10 cycles using genomic selection and a hub network mating design, where the hub parents with the largest selection metric make large parental contributions. It also requires that the breeding populations be organized as fully connected family islands, where every island is connected to every other island, and migration rules allow the exchange of two lines among islands every other cycle of selection. If the objectives are to maximize both short-term and long-term gains, then the best compromise strategy is similar except that the mating design could be hub network, chain rule, or a multi-objective optimization method-based mating design. Weighted genomic selection applied to centralized populations also resulted in the realization of the greatest proportion of the genetic potential of the founders but required more cycles than the best compromise strategy.

scholarly journals Combining genetic resources and elite material populations to improve the accuracy of genomic prediction in apple

2021 ◽  
Author(s):  
Xabi Cazenave ◽  
Bernard Petit ◽  
Marc Lateur ◽  
Hilde Nybom ◽  
Jiri Sedlak ◽  
...  
Keyword(s):  
Genetic Resources ◽  
Genomic Selection ◽  
Predictive Ability ◽  
Practical Implementation ◽  
Specific Marker ◽  
Training Set ◽  
High Genetic Diversity ◽  
Breeding Programs ◽  
Breeding Cycles ◽  
Two Populations

Abstract Genomic selection is an attractive strategy for apple breeding that could reduce the length of breeding cycles. A possible limitation to the practical implementation of this approach lies in the creation of a training set large and diverse enough to ensure accurate predictions. In this study, we investigated the potential of combining two available populations, i.e. genetic resources and elite material, in order to obtain a large training set with a high genetic diversity. We compared the predictive ability of genomic predictions within-population, across-population or when combining both populations, and tested a model accounting for population-specific marker effects in this last case. The obtained predictive abilities were moderate to high according to the studied trait and small increases in predictive ability could be obtained for some traits when the two populations were combined into a unique training set. We also investigated the potential of such a training set to predict hybrids resulting from crosses between the two populations, with a focus on the method to design the training set and the best proportion of each population to optimize predictions. The measured predictive abilities were very similar for all the proportions, except for the extreme cases where only one of the two populations was used in the training set, in which case predictive abilities could be lower than when using both populations. Using an optimization algorithm to choose the genotypes in the training set also led to higher predictive abilities than when the genotypes were chosen at random. Our results provide guidelines to initiate breeding programs that use genomic selection when the implementation of the training set is a limitation.

scholarly journals A multi-part strategy for introgression of exotic germplasm into elite plant breeding programs using genomic selection

2022 ◽  
Author(s):  
Irene S. Breider ◽  
R. Chris Gaynor ◽  
Gregor Gorjanc ◽  
Steve Thorn ◽  
Manish K. Pandey ◽  
...  
Keyword(s):  
Genetic Variation ◽  
Plant Breeding ◽  
Genomic Selection ◽  
Genetic Gain ◽  
Genetic Improvement ◽  
Breeding Strategy ◽  
Breeding Program ◽  
Breeding Programs ◽  
Polygenic Inheritance ◽  
Polygenic Traits

Abstract Some of the most economically important traits in plant breeding show highly polygenic inheritance. Genetic variation is a key determinant of the rates of genetic improvement in selective breeding programs. Rapid progress in genetic improvement comes at the cost of a rapid loss of genetic variation. Germplasm available through expired Plant Variety Protection (exPVP) lines is a potential resource of variation previously lost in elite breeding programs. Introgression for polygenic traits is challenging, as many genes have a small effect on the trait of interest. Here we propose a way to overcome these challenges with a multi-part pre-breeding program that has feedback pathways to optimise recurrent genomic selection. The multi-part breeding program consists of three components, namely a bridging component, population improvement, and product development. Parameters influencing the multi-part program were optimised with the use of a grid search. Haploblock effect and origin were investigated. Results showed that the introgression of exPVP germplasm using an optimised multi-part breeding strategy resulted in 1.53 times higher genetic gain compared to a two-part breeding program. Higher gain was achieved through reducing the performance gap between exPVP and elite germplasm and breaking down linkage drag. Both first and subsequent introgression events showed to be successful. In conclusion, the multi-part breeding strategy has a potential to improve long-term genetic gain for polygenic traits and therefore, potential to contribute to global food security.

scholarly journals Combining genetic resources and elite material populations to improve the accuracy of genomic prediction in apple

2021 ◽  
Author(s):  
Xabi Cazenave ◽  
Bernard Petit ◽  
Francois Laurens ◽  
Charles-Eric Durel ◽  
Helene Muranty
Keyword(s):  
Genetic Resources ◽  
Genomic Selection ◽  
Predictive Ability ◽  
Practical Implementation ◽  
Specific Marker ◽  
Training Set ◽  
High Genetic Diversity ◽  
Breeding Programs ◽  
Breeding Cycles ◽  
Two Populations

Genomic selection is an attractive strategy for apple breeding that could reduce the length of breeding cycles. A possible limitation to the practical implementation of this approach lies in the creation of a training set large and diverse enough to ensure accurate predictions. In this study, we investigated the potential of combining two available populations, i.e. genetic resources and elite material, in order to obtain a large training set with a high genetic diversity. We compared the predictive ability of genomic predictions within-population, across-population or when combining both populations, and tested a model accounting for population-specific marker effects in this last case. The obtained predictive abilities were moderate to high according to the studied trait and were always highest when the two populations were combined into a unique training set. We also investigated the potential of such a training set to predict hybrids resulting from crosses between the two populations, with a focus on the method to design the training set and the best proportion of each population to optimize predictions. The measured predictive abilities were very similar for all the proportions, except for the extreme cases where only one of the two populations was used in the training set, in which case predictive abilities could be lower than when using both populations. Using an optimization algorithm to choose the genotypes in the training set also led to higher predictive abilities than when the genotypes were chosen at random. Our results provide guidelines to initiate breeding programs that use genomic selection when the implementation of the training set is a limitation.

scholarly journals 189 Choices ahead for dairy cattle breeding programs

2019 ◽  
Vol 97 (Supplement_3) ◽  
pp. 22-23
Author(s):  
Michael M Lohuis
Keyword(s):  
Dairy Cattle ◽  
Genomic Selection ◽  
Gene Editing ◽  
New Technologies ◽  
Value Added ◽  
Progeny Testing ◽  
Cattle Breeding ◽  
Breeding Programs ◽  
Dairy Cattle Breeding ◽  
Selection For

Abstract Dairy cattle breeding programs have been transformed from conventional progeny-testing schemes to genomic selection paired with nucleus herd breeding in the span of one decade. This was spurred by the simultaneous advances in low-cost SNP genotyping, genomic selection methodology and reproductive biotechnologies. The rates of genetic progress have approximately doubled in this time but so have increases in inbreeding levels. This was driven by intense competition between AI studs and farmer adherence to common selection indices which has concentrated selection on very elite segments of juvenile age groups. This has led to speculation on the need for alternative indices and selection for novel traits in order to differentiate breeding programs and customize selection for unique farm conditions. This will be made more possible by the advent of on-farm sensor technology and artificial intelligence algorithms. Large commercial dairies are increasingly experimenting with crossbreeding with varying levels of success and this will require a new approach by breeding programs to focus both on purebred and crossbred performance. In addition, the potential exists for use of gene-editing to further enable value-added traits to be added into breeding programs. In parallel with breeding program advancements, consumer trends are also changing to include more interest in specialty dairy products with implied differences in digestibility, health or environmental impacts. Identifying technologies and traits that will add value either on the farm as well as at the consumer level will be a challenge for today’s breeders and producers. Some new technologies, such as gene editing, can pose consumer acceptance challenges if they are perceived to be used carelessly or for the wrong reasons. Careful choices will need to be made to continue to improve profitability, functionality and health of dairy cattle while also meeting higher consumer standards for animal welfare, health and the environment.

Sign in / Sign up

Export Citation Format

Share Document