scholarly journals Effects of seasonality, fertilization and species on the chlorophyll a fluorescence as related with photosynthesis and leguminous tree growth during Amazonian forest restoration

2020 ◽  
Author(s):  
Roberto Kirmayr Jaquetti ◽  
José Francisco de Carvalho Gonçalves ◽  
Henrique Eduardo Mendonça Nascimento ◽  
Karen Cristina Pires da Costa ◽  
Jair Max Fortunato Maia ◽  
...  
Keyword(s):  
Electron Transport ◽  
Performance Index ◽  
Forest Restoration ◽  
Cost Effective ◽  
Interspecific Variation ◽  
High Water ◽  
Diameter Growth ◽  
Cost Effective Technique ◽  
Species Specific ◽  
Degraded Ecosystems

AbstractThe ability of species to adjust their light energy uptake is determined during plant establishment and development. Changes in resource availability may impact energy fluxes and photosynthesis. General and specific variations in chlorophyll a fluorescence under high vs. low water and nutrient conditions have been studied. N2-fixing leguminous trees, which are commonly used in tropical forest restoration, seem to be very well adapted to degraded ecosystems. To understand the effects of biological nitrogen fixation on Chl a fluorescence variables, three of the six Fabaceae species selected for this study were N2-fixing species. Additionally, the correlation among Chl a fluorescence and growth, photosynthesis and nutrient levels was evaluated. A 24-month forest restoration experiment was established, and data on dark-adapted Chl a fluorescence, photosynthesis, diameter growth and foliar nutrients were collected. Multivariate analysis was performed to detect the effects of seasonality and fertilization. Under high water- and nutrient-availability conditions, plants exhibited enhanced performance index values that were correlated with electron transport fluxes. Under drought and nutrient-poor conditions, most species exhibited increased energy dissipation as a method of photoprotection. Great interspecific variation was found; therefore, species-specific responses to the test conditions should be considered in future studies. N2-fixing species showed increased performance index and maximum fluorescence values, indicating their ability to colonize high-light environments. Negative correlations were found between photosynthesis and trapped fluxes and between diameter growth and initial fluorescence. Electron transport fluxes were positively correlated with growth. Given the different responses identified among species, Chl a fluorescence is considered a cost-effective technique to screen for seasonality, nutrient and N2-fixing species effects and should be considered for use during forest restoration. Finally, including N2-fixing species and multiple fertilization treatments in related studies may greatly facilitate the restoration of biogeochemical cycles in the tropics.

scholarly journals Conversion of sequence-characterized amplified region (SCAR) bands into high-throughput DNA markers based on RAPD technique for detection of the stem nematode Ditylenchus dipsaci in crucial plant hosts

2008 ◽  
Vol 53 (No. 3) ◽  
pp. 97-104 ◽  
Author(s):  
M. Zouhar ◽  
M. Marek ◽  
O. Douda ◽  
J. Mazáková ◽  
P. Ryšánek
Keyword(s):  
Cost Effective ◽  
Healthy Plant ◽  
Host Preferences ◽  
Sequence Characterized Amplified Region ◽  
Detection And Identification ◽  
Plant Hosts ◽  
Cost Effective Technique ◽  
Ditylenchus Dipsaci ◽  
Species Specific ◽  
Template Dna

<i>Ditylenchus dipsaci</i>, the stem nematode, is a migratory endoparasite of over 500 species of angiosperms. The main method of <i>D. dipsaci</i> control is crop rotation, but the presence of morphologically indistinguishable host races with different host preferences makes rotation generally ineffective. Therefore, a sensitive, rapid, reliable, as well as cost effective technique is needed for identification of <i>D. dipsaci</i> in biological samples. This study describes the development of species-specific pairs of PCR oligonucleotides for detection and identification of the <i>D. dipsaci</i> stem nematode in various plant hosts. Designed DIT-2 primer pair specifically amplified a fragment of 325 bp, while DIT-5 primer pair always produced a fragment of 245 bp in all <i>D. dipsaci</i> isolates. Two developed SCAR primer pairs were further tested using template DNA extracted from a collection of twelve healthy plant hosts; no amplification was however observed. The developed PCR protocol has proved to be quite sensitive and able to specifically detect <i>D. dipsaci</i> in artificially infested plant tissues.

A Chemical Perspective to the Anti-Amyloid Action of Compounds and a Nanoparticle Based Assay for Screening Amyloid Inhibitors

2020 ◽  
Author(s):  
Nidhi Gour ◽  
Bharti Koshti
Keyword(s):  
Memory Loss ◽  
Cost Effective ◽  
Structural Motif ◽  
Rapid Screening ◽  
Stacking Interactions ◽  
Aromatic Rings ◽  
Amyloid Fibers ◽  
Aromatic Stacking ◽  
Cost Effective Technique ◽  
The Brain

Aggregation of amyloid beeta 1-42 (Aβ<sub>42</sub>) peptide causes the formation of clustered deposits knows as amyloid plaques in the brain which leads to neuronal dysfunction and memory loss and associated with many neurological disorders including Alzheimer’s and Parkinson’s. Aβ<sub>42</sub> has core structural motif with phenylalanine at the 19 and 20 positions. The diphenylalanine (FF) residue plays a crucial role in the formation of amyloid fibers and serves as model peptide for studying Aβ<sub>42 </sub>aggregation. FF self-assembles to well-ordered tubular morphology via aromatic pi-pi stackings. Our studies, suggest that the aromatic rings present in the anti-amyloidogenic compounds may interact with the pi-pi stacking interactions present in the FF. Even the compounds which do not have aromatic rings, like cyclodextrin and cucurbituril show anti-amyloid property due to the binding of aromatic ring inside the guest cavity. Hence, our studies also suggest that compounds which may have a functional moiety capable of interacting with the aromatic stacking interactions might be tested for their anti-amyloidogenic properties. Further, in this manuscript, we have proposed two novel nanoparticle based assays for the rapid screening of amyloid inhibitors. In the first assay, interaction between biotin-tagged FF peptide and the streptavidin labelled gold nanoparticles (s-AuNPs) were used. In another assay, thiol-Au interactions were used to develop an assay for detection of amyloid inhibitors. It is envisaged that the proposed analytical method will provide a simple, facile and cost effective technique for the screening of amyloid inhibitors and may be of immense practical implications to find the therapeutic remedies for the diseases associated with the protein aggregation.

Bucket handle meniscus tears in low-resource settings can be successfully treated with a cost-effective technique

2021 ◽  
Author(s):  
Allicia Ostoposides Imada ◽  
James J. O’Hara ◽  
Ignacio L. Proumen ◽  
Pablo S. Molinari ◽  
Daniel C. Wascher ◽  
...  
Keyword(s):  
Cost Effective ◽  
Effective Technique ◽  
Low Resource Settings ◽  
Low Resource ◽  
Meniscus Tears ◽  
Cost Effective Technique ◽  
Bucket Handle

scholarly journals Study on microcrystalline cellulose/chitosan blend foam gel material

2020 ◽  
Vol 27 (1) ◽  
pp. 424-432
Author(s):  
Hongkai Zhao ◽  
Kehan Zhang ◽  
Shoupeng Rui ◽  
Peipei Zhao
Keyword(s):  
Microcrystalline Cellulose ◽  
Raw Materials ◽  
Pore Space ◽  
Sodium Dodecyl ◽  
Cost Effective ◽  
High Water ◽  
Aldehyde Group ◽  
Sem Analysis ◽  
Present Contribution ◽  
Bet Analysis

AbstractIn the present contribution, an environmental-friendly and cost-effective adsorbent was reported for soil treatment and desertification control. A novel foam gel material was synthesized here by the physical foaming in the absence of catalyst. By adopting modified microcrystalline cellulose and chitosan as raw materials and sodium dodecyl sulfonate (SDS) as foaming agent, a microcrystalline cellulose/chitosan blend foam gel was synthesized. It is expected to replace polymers derived from petroleum for agricultural applications. In addition, a systematical study was conducted on the adsorbability, water holding capacity and re-expansion performance of foam gel in deionized water and brine under different SDS concentrations (2%–5%) as well as adsorption time. To be specific, the adsorption capacity of foam gel was up to 105g/g in distilled water and 54g/g in brine, indicating a high water absorption performance. As revealed from the results of Fourier transform infrared spectroscopy (FTIR) analysis, both the amino group of chitosan and the aldehyde group modified by cellulose were involved. According to the results of Scanning electron microscope (SEM) analysis, the foam gel was found to exhibit an interconnected pore network with uniform pore space. As suggested by Bet analysis, the macroporous structure was formed in the sample, and the pore size ranged from 0 to 170nm. The mentioned findings demonstrated that the foam gel material of this study refers to a potential environmental absorbent to improve soil and desert environments. It can act as a powerful alternative to conventional petroleum derived polymers.

scholarly journals Simple, cost-effective technique for portable digital eletrocorticography

2000 ◽  
Vol 58 (2B) ◽  
pp. 424-427 ◽  
Author(s):  
PAULO R. M. DE BITTENCOURT ◽  
MARCOS C. SANDMANN ◽  
MARLUS S. MORO ◽  
JOÃO C. DE ARAÚJO
Keyword(s):  
Real Time ◽  
Epilepsy Surgery ◽  
Vascular Malformations ◽  
Cost Effective ◽  
New Method ◽  
Cortical Lesions ◽  
Effective Technique ◽  
Seizure Disorders ◽  
Operational Costs ◽  
Cost Effective Technique

We revised 16 patients submitted to epilepsy surgery using a new method of digital, real-time, portable electrocorticography. Patients were operated upon over a period of 28 months. There were no complications. The exam was useful in 13 cases. The low installation and operational costs, the reliability and simplicity of the method, indicate it may be useful for defining the epileptogenic regions in a variety of circumnstances, including surgery for tumors, vascular malformations, and other cortical lesions associated with seizure disorders.

Formation of Periodical Sub-Micron Sized Structures on Silicon by Interfered Nanosecond Laser Pulses

2010 ◽  
Vol 97-101 ◽  
pp. 3803-3806
Author(s):  
Yong Xiang Hu ◽  
Heng Zhang ◽  
Zheng Qiang Yao
Keyword(s):  
Cost Effective ◽  
Laser Pulses ◽  
Laser Beams ◽  
Nanosecond Laser ◽  
Effective Technique ◽  
First Order ◽  
Direct Fabrication ◽  
Cost Effective Technique ◽  
Nanosecond Laser Pulses ◽  
Micro Structuring

Laser interference micro-structuring is a relatively efficient and cost-effective technique for fabricating periodical micro-nano-structuring surfaces. The direct fabrication of sub-micron sized dot array on silicon was performed by four interfering nanosecond laser beams with a diffractive beam splitter. The mechanism to form the dot array was analyzed and it was found that the obtained conical dot array had a negative shape of the interference pattern of four laser beams. A second-order peak between two first-order peaks also occurred due to the liquid-solid expansion.

Duplex DNA barcoding allows accurate species determination of morphologically similar limpets (Patella spp.) from non-destructive sampling

2016 ◽  
Vol 97 (7) ◽  
pp. 1479-1482 ◽  
Author(s):  
Thomas J. Ashton ◽  
Meriem Kayoueche-Reeve ◽  
Andrew J. Blight ◽  
Jon Moore ◽  
David M. Paterson
Keyword(s):  
Dna Barcoding ◽  
Species Abundance ◽  
Microscopic Analysis ◽  
Cost Effective ◽  
Field Studies ◽  
Similar Species ◽  
Species Determination ◽  
Destructive Sampling ◽  
Species Specific ◽  
Non Destructive

Accurate discrimination of two morphologically similar species of Patella limpets has been facilitated by using qPCR amplification of species-specific mitochondrial genomic regions. Cost-effective and non-destructive sampling is achieved using a mucus swab and simple sample lysis and dilution to create a PCR template. Results show 100% concurrence with dissection and microscopic analysis, and the technique has been employed successfully in field studies. The use of highly sensitive DNA barcoding techniques such as this hold great potential for improving previously challenging field assessments of species abundance.

Telemedicine in the control of intra-ocular pressure

2000 ◽  
Vol 6 (1_suppl) ◽  
pp. 126-128 ◽  
Author(s):  
G Michelson ◽  
W Striebel ◽  
W Prihoda ◽  
Volker Schmidt
Keyword(s):  
Cost Effective ◽  
Western World ◽  
Pressure Curve ◽  
Effective Technique ◽  
Intra Ocular Pressure ◽  
Continuous Evaluation ◽  
Common Causes ◽  
Cost Effective Technique ◽  
Email Message ◽  
Ocular Pressure

Glaucoma is one of the most common causes of blindness in the Western world and a major risk factor is increased intra-ocular pressure. We therefore used telemedicine in its control. Patients measured their intra-ocular pressure several times a day with a portable instrument and the values were then entered into a portable digital assistant. These data were transmitted by a modem to a central server. If the intra-ocular pressure was pathologically high, an email message was automatically sent to the ophthalmologist. The pressure curve, including a statistical analysis, was displayed in an easily readable chart format. Ten patients with glaucoma participated in a trial. Self-tonometry with telemedicine enabled continuous evaluation of the patient by the ophthalmologist. This approach offered the advantage of controlling the treatment remotely. Advantages for the patient were that the measurements were easily done at home under normal conditions, and the patient could control when the measurement and data transmission would be performed. Telemedicine is a cost-effective technique enabling the early diagnosis of pathologically increased intra-ocular pressure.

Effects of Carrier Material and Design on Microalgae Attachment for Biofuel Manufacturing: A Literature Review

2010 ◽  
Author(s):  
Yan Cui ◽  
Wenqiao Wayne Yuan ◽  
Zhijian Pei
Keyword(s):  
Free Energy ◽  
Large Scale ◽  
Cell Attachment ◽  
Cost Effective ◽  
Surface Wettability ◽  
Biofuel Production ◽  
Algae Biofuels ◽  
Attachment Strength ◽  
Species Specific ◽  
Continuous Use

Continuous use of petroleum derived fuels is widely recognized as unsustainable due to depleting supplies and the accumulation of greenhouse gases in the environment. Renewable, carbon neutral transport fuels are needed for environmental and economic sustainabilities. Algae have been demonstrated to be one of the most promising sources for biofuel production. However, large-scale algae production and harvesting for energy manufacturing are too costly using existing methods. The approach of growing algae on solid carriers is innovative and can potentially lead to cost-effective manufacturing of algae biofuels. As cells approach to the solid surface, many factors come in to influence microbial attachment such as the surface wettability, free energy, polarity, roughness and topography. Surface wettability plays an important role in the initial cell attachment. For further contact, surface free energy and polarity are more directly related to cell-substratum attachment strength. Surface roughness and texture are species-specific parameters and have been applied widely in attachment studies.

Sign in / Sign up

Export Citation Format

Share Document