scholarly journals Aerobic removal of microcystin-LR by a novel native effective bacterial community designated as YFMCD4 isolated from Lake Taihu

2018 ◽  
Author(s):  
Fei Yang ◽  
Jian Guo ◽  
Feiyu Huang ◽  
Isaac Yaw Massey ◽  
Ruixue Huang ◽  
...  
Keyword(s):  
Bacterial Community ◽  
High Performance ◽  
Lake Taihu ◽  
Degradation Process ◽  
Alcaligenes Faecalis ◽  
Degradation Pathway ◽  
Natural Ecosystem ◽  
The Novel ◽  
Different Temperatures ◽  
Cost Efficient

AbstractMicrocystins (MCs) are a group of monocyclic heptapeptide hepatotoxins produced by species of cyanobacteria. MC-LR is the most toxic and frequently detected MCs variant in water, which poses a great threat to the natural ecosystem and public health. It’s important to seek environment-friendly and cost-efficient methods to remove MC-LR. To investigate the MC-degrading capacities of a novel indigenous bacterial community designated as YFMCD4 and the influence of environmental factors including various temperatures, MC concentrations and pH on the MC-degrading activities, the concentration of MC-LR was measured by high performance liquid chromatography. In addition, the MC-degrading mechanism containing the degradation pathway and products of YFMCD4 was studied using HPLC coupled with an ultra-high resolution LTQ Orbitrap Velos Pro ETD mass spectrometry equipped with electrospray ionization interface. The data showed MC-LR can be removed at the maximum rate of 0.5 µg/(ml·h) by YFMCD4 containingAlcaligenes faecalisandStenotrophomonas acidaminiohila. The MC-degrading rates of YFMCD4 were significantly affected by different temperatures, pH and MC-LR concentrations. Two intermediates of a tetrapeptide and Adda appeared in the degradation process. These results illustrate that the novel bacterial community YFMCD4 can remove MC-LR effectively and completely, which indicates YFMCD4 possesses a significant potential to be used in bioremediation of water bodies contaminated by MC-LR.

scholarly journals Removal of Microcystin-LR by a Novel Native Effective Bacterial Community Designated as YFMCD4 Isolated from Lake Taihu

Toxins ◽  
2018 ◽  
Vol 10 (9) ◽  
pp. 363 ◽  
Author(s):  
Fei Yang ◽  
Jian Guo ◽  
Feiyu Huang ◽  
Isaac Massey ◽  
Ruixue Huang ◽  
...  
Keyword(s):  
Bacterial Community ◽  
High Performance ◽  
Lake Taihu ◽  
Degradation Process ◽  
Alcaligenes Faecalis ◽  
Natural Ecosystem ◽  
The Novel ◽  
Bacterial Strains ◽  
Different Temperatures ◽  
Cost Efficient

Microcystin-LR (MC-LR) is the most toxic and frequently detected monocyclic heptapeptide hepatotoxin produced by cyanobacteria, which poses a great threat to the natural ecosystem and public health. It is very important to seek environment-friendly and cost-efficient methods to remove MC-LR in water. In this study, the MC-degrading capacities of a novel indigenous bacterial community designated as YFMCD4 and the influence of environmental factors including various temperatures, MC concentrations and pH on the MC-degrading activities were investigated utilizing high-performance liquid chromatography (HPLC). In addition, the MC-degrading mechanism of YFMCD4 was also studied using HPLC coupled with a mass spectrometry equipped with electrospray ionization interface (HPLC-ESI-MS). The data showed MC-LR was completely removed at the maximum rate of 0.5 µg/(mL·h) under the optimal condition by YFMCD4. Two pure bacterial strains Alcaligenes faecalis and Stenotrophomonas acidaminiohila were isolated from YFMCD4 degraded MC-LR at a slower rate. The MC-degrading rates of YFMCD4 were significantly affected by different temperatures, pH and MC-LR concentrations. Two intermediates of a tetrapeptide and Adda appeared in the degradation process. These results illustrate that the novel YFMCD4 is one of the highest effective MC-degrading bacterial community, which can completely remove MC-LR and possesses a significant potential to treat water bodies contaminated by MC-LR.

Microstructure of sputter deposited Ni-Sb ohmic contacts on GaAs

1989 ◽  
Vol 47 ◽  
pp. 450-451
Author(s):  
S. Yegnasubramanian ◽  
V.C. Kannan ◽  
R. Dutto ◽  
P.J. Sakach
Keyword(s):  
High Performance ◽  
Ohmic Contacts ◽  
Surface Defects ◽  
Pure Metal ◽  
Device Fabrication ◽  
Native Oxide ◽  
Metal Thin Films ◽  
Recent Developments ◽  
Different Temperatures ◽  
Sputter Deposited

Recent developments in the fabrication of high performance GaAs devices impose crucial requirements of low resistance ohmic contacts with excellent contact properties such as, thermal stability, contact resistivity, contact depth, Schottky barrier height etc. The nature of the interface plays an important role in the stability of the contacts due to problems associated with interdiffusion and compound formation at the interface during device fabrication. Contacts of pure metal thin films on GaAs are not desirable due to the presence of the native oxide and surface defects at the interface. Nickel has been used as a contact metal on GaAs and has been found to be reactive at low temperatures. Formation Of Ni2 GaAs at 200 - 350C is reported and is found to grow epitaxially on (001) and on (111) GaAs, but is shown to be unstable at 450C. This paper reports the investigations carried out to understand the microstructure, nature of the interface and composition of sputter deposited and annealed (at different temperatures) Ni-Sb ohmic contacts on GaAs by TEM. Attempts were made to correlate the electrical properties of the films such as the sheet resistance and contact resistance, with the microstructure. The observations are corroborated by Scanning Auger Microprobe (SAM) investigations.

scholarly journals High-Performance Liquid Chromatography-Tandem Mass Spectrometry for Buprenorphine Evaluation in Plasma—Application to Pharmacokinetic Studies in Rabbits

Molecules ◽  
2021 ◽  
Vol 26 (2) ◽  
pp. 437
Author(s):  
Marta Tikhomirov ◽  
Błażej Poźniak ◽  
Tomasz Śniegocki
Keyword(s):  
High Performance ◽  
Pharmacokinetic Profile ◽  
Pharmacokinetic Studies ◽  
Limit Of Quantification ◽  
Reliable Determination ◽  
Main Challenge ◽  
Analytical Protocol ◽  
Liquid Chromatography Tandem Mass ◽  
Cost Efficient

The precise and reliable determination of buprenorphine concentration is fundamental in certain medical or research applications, particularly in pharmacokinetic studies of this opioid. The main challenge is, however, the development of an analytical method that is sensitive enough, as the detected in vivo concentrations often fall in very low ranges. Thus, in this study we aimed at developing a sensitive, repeatable, cost-efficient, and easy HPLC analytical protocol for buprenorphine in rabbit plasma. In order to obtain this, the HPLC-MS2 system was used to elaborate and validate the method for samples purified with liquid-liquid extraction. Fragment ions 468.6→396.2 and 468.6→414.2 were monitored, and the method resulted in a high repeatability and reproducibility and a limit of quantification of 0.25 µg/L with a recovery of 98.7–109.0%. The method was linear in a range of 0.25–2000 µg/L. The suitability of the analytical procedure was tested in rabbits in a pilot pharmacokinetic study, and it was revealed that the method was suitable for comprehensively describing the pharmacokinetic profile after buprenorphine intravenous administration at a dose of 300 µg/kg. Thus, the method suitability for pharmacokinetic application was confirmed by both the good validation results of the method and successful in vivo tests in rabbits.

scholarly journals Pocket MUSE: an affordable, versatile and high-performance fluorescence microscope using a smartphone

2021 ◽  
Vol 4 (1) ◽  
Author(s):  
Yehe Liu ◽  
Andrew M. Rollins ◽  
Richard M. Levenson ◽  
Farzad Fereidouni ◽  
Michael W. Jenkins
Keyword(s):  
High Performance ◽  
Point Of Care ◽  
Low Cost ◽  
Consumer Electronics ◽  
Practical Implementation ◽  
The Novel ◽  
Point Of Care Diagnostics ◽  
Optical Module ◽  
Optical Configuration ◽  
User Friendly

AbstractSmartphone microscopes can be useful tools for a broad range of imaging applications. This manuscript demonstrates the first practical implementation of Microscopy with Ultraviolet Surface Excitation (MUSE) in a compact smartphone microscope called Pocket MUSE, resulting in a remarkably effective design. Fabricated with parts from consumer electronics that are readily available at low cost, the small optical module attaches directly over the rear lens in a smartphone. It enables high-quality multichannel fluorescence microscopy with submicron resolution over a 10× equivalent field of view. In addition to the novel optical configuration, Pocket MUSE is compatible with a series of simple, portable, and user-friendly sample preparation strategies that can be directly implemented for various microscopy applications for point-of-care diagnostics, at-home health monitoring, plant biology, STEM education, environmental studies, etc.

scholarly journals Can artificially selected phenotypes influence a component of field fitness? Thermal selection and fly performance under thermal extremes

2006 ◽  
Vol 274 (1611) ◽  
pp. 771-778 ◽  
Author(s):  
Torsten Nygaard Kristensen ◽  
Volker Loeschcke ◽  
Ary A Hoffmann
Keyword(s):  
High Performance ◽  
Quantitative Traits ◽  
Genetic Basis ◽  
Selected Lines ◽  
Resistant Lines ◽  
Correlated Patterns ◽  
Different Temperatures ◽  
Evolutionary Trajectories ◽  
Low Performance ◽  
Selected Traits

Artificially selected lines are widely used to investigate the genetic basis of quantitative traits and make inferences about evolutionary trajectories. Yet, the relevance of selected traits to field fitness is rarely tested. Here, we assess the relevance of thermal stress resistance artificially selected in the laboratory to one component of field fitness by investigating the likelihood of adult Drosophila melanogaster reaching food bait under different temperatures. Lines resistant to heat reached the bait more often than controls under hot and cold conditions, but less often at intermediate temperatures, suggesting a fitness cost of increased heat resistance but not at temperature extremes. Cold-resistant lines were more common at baits than controls under cold as well as hot field conditions, and there was no cost at intermediate temperatures. One of the replicate heat-resistant lines was caught less often than the others under hot conditions. Direct and correlated patterns of responses in laboratory tests did not fully predict the low performance of the heat selected lines at intermediate temperatures, nor the high performance of the cold selected lines under hot conditions. Therefore, lines selected artificially not only behaved partly as expected based on laboratory assays but also evolved patterns only evident in the field releases.

Fenton degradation of Cartap hydrochloride: identification of the main intermediates and the degradation pathway

2015 ◽  
Vol 72 (7) ◽  
pp. 1198-1205 ◽  
Author(s):  
Kaixun Tian ◽  
Cuixiang Ming ◽  
Youzhi Dai ◽  
Kouassi Marius Honore Ake
Keyword(s):  
Aqueous Medium ◽  
Flue Gas ◽  
High Performance ◽  
Oxygen Demand ◽  
Nitrogen Monoxide ◽  
Degradation Pathway ◽  
Gas Chromatograph ◽  
Gas Analyzer ◽  
Fenton System ◽  
Long Chain

The advanced oxidation of Cartap hydrochloride (Cartap) promoted by the Fenton system in an aqueous medium was investigated. Based on total organic carbon, chemical oxygen demand and high-performance liquid chromatography, the oxidation of Cartap is quite efficient by the Fenton system. Its long chain is easily destroyed, but the reaction does not proceed to complete mineralization. Ion chromatography detection indicated the formation of acetic acid, propionic acid, formic acid, nitrous acid and sulfuric acid in the reaction mixtures. Further evidence of nitrogen monoxide and sulfur dioxide formation was obtained by using a flue gas analyzer. Monitoring by gas chromatograph-mass spectrometer demonstrated the formation of oxalic acid, ethanol, carbon dioxide, and l-alanine ethylamide. Based on these experimental results, plausible degradation pathways for Cartap mineralization in an aqueous medium by the Fenton system are proposed.

High-performance Pd nanocatalysts based on the novel N-doped Ti3C2 support for ethanol electrooxidation in alkaline media

2021 ◽  
pp. 138902
Author(s):  
Zhangxin Chen ◽  
Binbin Yu ◽  
Jiajie Cao ◽  
Xiuli Wen ◽  
Minghui Luo ◽  
...  
Keyword(s):  
High Performance ◽  
Alkaline Media ◽  
The Novel ◽  
Ethanol Electrooxidation

scholarly journals Superior Degradation Performance of Nanoporous Copper Catalysts on Methyl Orange

Metals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 913
Author(s):  
Jinyi Wang ◽  
Sen Yang
Keyword(s):  
Activation Energy ◽  
Methyl Orange ◽  
High Efficiency ◽  
Low Cost ◽  
Degradation Process ◽  
Copper Catalysts ◽  
Reaction Rate Constant ◽  
Nanoporous Structure ◽  
Intra Particle Diffusion ◽  
Different Temperatures

The development of low-cost and high-efficiency catalysts for wastewater treatment is of great significance. Herein, nanoporous Cu/Cu2O catalysts were synthesized from MnCu, MnCuNi, and MnCuAl with similar ligament size through one-step dealloying. Meanwhile, the comparisons of three catalysts in performing methyl orange degradation were investigated. One of the catalysts possessed a degradation efficiency as high as 7.67 mg·g−1·min−1. With good linear fitting by the pseudo-first-order model, the reaction rate constant was evaluated. In order to better understand the degradation process, the adsorption behavior was considered, and it was divided into three stages based on the intra-particle diffusion model. Three different temperatures were applied to explore the activation energy of the degradation. As a photocatalytic agent, the nanoporous structure of Cu/Cu2O possessed a large surface area and it also had low activation energy, which were beneficial to the excellent degradation performance.

Sign in / Sign up

Export Citation Format

Share Document