scholarly journals Quantifying shape, integration, and ecology in avian pedal claws: comparing geometric morphometric and traditional metric approaches

2019 ◽  
Author(s):  
Brandon P. Hedrick ◽  
Samantha A. Cordero ◽  
Lindsay E. Zanno ◽  
Christopher Noto ◽  
Peter Dodson

AbstractTerrestrial tetrapods use their claws to interact with their environments in a plethora of ways. Birds in particular have developed a diversity of claw shapes since they are not bound to terrestrial locomotion and have heterogeneous body masses ranging several orders of magnitude. Numerous previous studies have hypothesized a connection between pedal claw shape and ecological mode in birds, but have generated conflicting results, spanning from clear ecological groupings based on claw shape to a complete overlap of ecological modes. These studies have relied on traditional morphometric arc measurements of keratinous sheaths and have variably accounted for likely confounding factors such as body mass and phylogenetic relatedness. To better address the hypothesized relationship between ecology and claw shape in birds, 580 radiographs were collected allowing visualization of the bony core and keratinous sheath shape spanning 21 avian orders. A new method was used to quantify claw shape using geometric morphometrics and was compared to results using traditional arc measurements. Neither traditional nor geometric morphometrics are capable of significantly separating bird claws into coarse ecological categories after integrating body size and phylogenetic relatedness. Further, the bony claw core and keratinous sheath are significantly integrated with one another, suggesting that they function as a single unit. Therefore, it is likely possible to compare fossil bony cores with extant keratinous sheaths after applying corrections. Finally, traditional metrics and geometric morphometric shape are significantly, yet loosely correlated, and geometric morphometric data better distinguish ecological groups in morphospace than is possible with traditional metrics. Based on these results, future workers are encouraged to use geometric morphometric approaches to study claw geometry and account for confounding factors such as body size, phylogeny, and individual variation prior to predicting ecology in fossil taxa.

2019 ◽  
Vol 2019 ◽  
pp. 1-8 ◽  
Author(s):  
Renan Rodrigues Rocha ◽  
Rosana de Mesquita Alves ◽  
Rubens Pasa ◽  
Karine Frehner Kavalco

The Astyanax scabripinnis complex is composed of a large number of almost morphological indistinguishable species, including Astyanax paranae and Astyanax rivularis, which exist in the Paraná and São Francisco Basins, respectively, and sometimes are considered subspecies of the A. scabripinnis group or even are cited just as A. scabripinnis. The two river basins are separated by the Upper Paranaíba Arc, likely the main cause of the isolation of these species. We used geometric morphometric tools and DNA analyses of populations of both species to identify the differences between them. Geometric morphometrics separated the two species into distinct groups, whose main difference was the body depth. This is generally related to the speed of the water flow in the river basins. The maximum likelihood phylogram based on mitochondrial DNA sequences formed two main clades: one composed of the population of A. rivularis and the other, of A. paranae. In the haplotype network, the species were similarly separated into two groups from the same ancestral haplotype, with A. rivularis dispersing into two lineages in the São Francisco River Basin. The distribution of A. paranae is a consequence of a secondary dispersion event in the Paraná River Basin. It forms two lineages from a haplotype derived from the ancestor. The vicariant effect of separate basins, through the elevation of the Upper Paranaíba Arc, led to the allopatric speciation of the populations originating the present species. The results of geometric morphometrics and molecular data of the fish show the importance of this geological event in the biogeography and evolutionary history of the ichthyofauna of the region and indicate that the isolation of these species seems to be effective.


Author(s):  
Valentina P. Vetrova ◽  
◽  
Alexey P. Barchenkov ◽  
Nadezhda V. Sinelnikova ◽  
◽  
...  

Geometric morphometric analysis of shape variation in the cone scales of two closely related larch species, Larix dahurica Laws. (=Larix gmelinii (Rupr.) Rupr) and L. cajanderi Mayr, was carried out. The data on the taxonomy and distribution of L. dahurica and L. cajanderi are contradictory. The taxonomic status of L. cajanderi has been confirmed by the genetic and morphological studies performed in Russia and based on considerable evidence, but the species has not been recognized internationally, being considered as a synonym of Larix gmelinii var. gmelinii. In the systematics of larch, morphological characters of the generative organs are mainly used as diagnostic markers, among the most important being the shape variation of the cone scales. The aim of this study was to test geometric morphometrics as a tool for analyzing differentiation of L. dahurica and L. cajanderi in the shape of their cone scales. Characterization of shape variations in cone scales using geometric morphometric methods consists in digitizing points along an outline of scales followed by analysis of partial warps, describing individual differences in coordinates of the outline points. We studied the populations of L. dahurica from Evenkia and the Trans-Baikal region and six L. cajanderi populations from Yakutia and Magadan Oblast. In each population, we analyzed samples of 100-150 cones collected from 20-30 trees. Scales taken from the middle part of the cones were scanned using an Epson Perfection V500 Photo. On the scanned images, outline points were placed with a TPSDig program (Rolf, 2010), using angular algorithm (Oreshkova et al., 2015). The data were processed and analyzed using Integrated Morphometrics Programs (IMP) software (http://www.canisius.edu/~sheets/ morphsoft.html, Sheets, 2001), following the guidelines on geometric morphometrics in biology (Pavlinov, Mikeshina, 2002; Zelditch et al., 2004). Initial coordinates of the scale landmarks were aligned with the mean structure for L. dahurica and L. cajanderi cone scales using Procrustes superimposition in the CoordGen6 program. PCA based on covariances of partial warp scores was applied to reveal directions of variation in the shape of the cone scales. The relative deformations of the cone scales (PCA scores) were used as shape variables for statistical comparisons of these two larch species with canonical discriminant analysis. Morphotypes of the cone scales were distinguished in L. dahurica populations by pairwise comparison of samples from trees in the TwoGroup6h program using Bootstrap resampling-based Goodall’s F-test (Sheets, 2001). Samples from the trees in which the cone scales differed significantly (p < 0.01) were considered to belong to different morphotypes. Morphotypes distinguished in L. dahurica populations were compared with the morphotypes that we had previously determined in L. cajanderi populations. The composition and the frequency of occurrence of morphotypes were used to determine phenotypic distances between populations (Zhivotovskii, 1991). Multidimensional scaling matrix of the phenotypic distances was applied for ordination of larch populations. In this research, we revealed differentiation of L. dahurica and L. cajanderi using geometric morphometric analysis of the shape variation of cone scales. The results of PCA of partial warp scores exposed four principal components, which account for 90% of total explained variance in the shape of the cone scales in the two larch species. Graphical representations of these shape transformations in the vector form characterized directions of shape variability in scales corresponding to the maximum and minimum values of four principal components (See Fig. 2). PCA-ordination of the larch populations revealed some difference in the shape variation of the cone scales in L. dahurica and L. cajanderi (See Fig. 3). The results of canonical discriminant analysis of relative deformations of scales showed differentiation of the populations of the two larch species (See Fig. 4). Eleven morphotypes were identified in L. dahurica cones from Evenkia and nine morphotypes in the Ingoda population, three of the morphotypes being common for both populations (See Fig. 5). The shape of L. dahurica cone scales varied from spatulate to oval and their apical margins from weakly sinuate to distinctly sinuate. The Trans-Baikal population was dominated by scales with obtuse (truncate) and rounded apexes. The obtained morphotypes were compared with 25 cone scale morphotypes previously distinguished in the Yakut and the Magadan L. cajanderi populations (See Fig. 3). Four similar morphotypes of cone scales were revealed in the North-Yeniseisk population of L. dahurica and the Yakut populations of L. cajanderi. The differences between them in the populations of the two larch species were nonsignificant (p > 0.01). All morphotypes of cone scales from the Ingoda population of L. dahurica differed significantly from L. cajanderi cone scale morphotypes. The results of multidimensional scaling phenotypic distance matrix calculated based on the similarity of morphotypes of L. dahurica and L. cajanderi populations were consistent with the results of their differentiation based on relative deformations of scales obtained using canonical discriminant analysis (See Fig. 4 and Fig. 7). In spite of the differences in the shape of the cone scales between the North-Yeniseisk and the Trans-Baikal populations of L. dahurica, they both differed from L. cajanderi populations. Thus, phenotypic analysis confirmed differentiation of these two larch species. Despite the similarities between a number of morphotypes, the Yakut L. cajanderi populations were differentiated from L. dahurica populations. Significant differences were noted between intraspecific groups: between L. cajanderi populations from Okhotsk-Kolyma Upland and Yakutia and between L. dahurica populations from Evenkia and the Trans-Baikal region (See Fig. 4). The similarities between species and intraspecific differences may be attributed to the ongoing processes of hybridization and species formation in the region where the ranges of the larches overlap with the ranges of L. czekanowskii Szafer and L. dahurica×L. cajanderi hybrids. Geometric morphometrics can be used as an effective tool for analyzing differentiation of L. dahurica and L. cajanderi in the shape of their cone scales.


2021 ◽  
Vol 11 (17) ◽  
pp. 7848
Author(s):  
Darío Herranz-Rodrigo ◽  
Silvia J. Tardáguila-Giacomozzi ◽  
Lloyd A. Courtenay ◽  
Juan-José Rodríguez-Alba ◽  
Antonio Garrucho ◽  
...  

Recent studies using geometric morphometrics for taphonomy have yielded interesting results, opening new horizons of research in both archaeological and paleontological sites. Here we present the analysis of tooth pits left by male and female individuals of two different carnivore species (Panthera tigris and Panthera pardus) in order to see if sexual dimorphism influences the morphology of tooth pit marks. In the process, 3D-scanning and applied statistics were used. Based on samples derived from two individuals of different sexes, the present results indicate sexual dimorphism in these felid species to not be a conditioning factor of tooth pit morphology.


2013 ◽  
Author(s):  
Jonathan P. Tennant ◽  
Norman MacLeod

Snout shape is a prominent aspect of herbivore feeding ecology, controlling both forage selectivity and intake rate. Many previous investigations have suggested that ruminant feeding classes can be discriminated via snout shape, with grazing and browsing species attributed ‘blunt’ and ‘pointed’ snouts respectively, with an intermediate sub-grouping. This aspect of functional ecology is analysed for the first time using a statistically rigorous geometry-based framework to compare the two-dimensional profiles of the premaxilla in ventral aspect for a large sample of ruminant species. Our results suggest that, when a sample of browsing and grazing ruminants are classified ecologically based on a range of independent indicators of their feeding strategy, they cannot be fully discriminated on the basis of their premaxilla profile shape. Instead, our sample forms a shape variation continuum with overlap between groupings, but with a 78 percent chance of successful categorisation. Moreover, previously used terminology such as ‘pointed’ and ‘blunt’ are largely inadequate for delimiting snout shape varieties, insofar as these terms lack the descriptive power to define the morphological disparity demonstrated. These results suggest that previous attempts to use snout shape as a proxy for feeding style in ruminants may have been biased due to under-sampling of this highly diverse group and to lack of geometric rigour in the assessment of shape data. Alternatively, conflicting or inadequate evidence in defining ‘browsers’ and ‘grazers’ could have caused incorrect assignment to ecological groups, distorting our analyses. The relation between snout shape and body mass are also documented.


2013 ◽  
Vol 34 (2) ◽  
pp. 217-232 ◽  
Author(s):  
Selvino Neckel-Oliveira ◽  
Selvino Neckel-Oliveira ◽  
Ulisses Galatti ◽  
Selvino Neckel-Oliveira ◽  
Ulisses Galatti ◽  
...  

The objective of the present study is to identify the ecological characteristics of Amazonian frogs that would make them candidates for endangered species status, and to quantify correlations between body size and geographic distribution. The study included 180 species for which information was available on life history characteristics, including reproductive mode, aquatic larval development, primary larval habitat and adult microhabitat, and activity period. Species with aquatic development were classified in eight ecological groups based on a cluster analysis. Twenty-eight of the aquatic-developing species share a stream-based larval development stage with groups of endangered or vulnerable species from Australia and Central America. The Amazonian species have geographic ranges around five times larger than their Australian and Central American counterparts. The median clutch size and geographic range in aquatic-developing anuran species were 20 percent and 3.3 percent greater, respectively, than those of terrestrial-developing species. For both aquatic- and terrestrial-developing species, body size was positively associated with clutch size. Body size was also correlated with geographic range in aquatic-developing, but not in terrestrial species. Restricted geographic ranges and a lack of populations in protected areas were recorded in both groups. Most of these species occur in the southwestern Brazilian Amazon, which not only has poor coverage of protected areas, but is becoming increasingly threatened by ongoing economic development. The systematic monitoring of the region’s anurans and the creation of new conservation units should thus be of the highest priority.


2020 ◽  
Vol 130 (4) ◽  
pp. 800-812 ◽  
Author(s):  
Juan Vrdoljak ◽  
Kevin Imanol Sanchez ◽  
Roberto Arreola-Ramos ◽  
Emilce Guadalupe Diaz Huesa ◽  
Alejandro Villagra ◽  
...  

Abstract The repeatability of findings is the key factor behind scientific reliability, and the failure to reproduce scientific findings has been termed the ‘replication crisis’. Geometric morphometrics is an established tool in evolutionary biology. However, different operators (and/or different methods) could act as large sources of variation in the data obtained. Here, we investigated inter-operator error in geometric morphometric protocols on complex shapes of Liolaemus lizards, as well as measurement error in three taxa varying in their difficulty of digitalization. We also examined the potential for these protocols to discriminate among complex shapes in closely related species. We found a wide range of inter-operator error, contributing between 19.5% and 60% to the total variation. Moreover, measurement error increased with the complexity of the quantified shape. All protocols were able to discriminate between species, but the use of more landmarks did not imply better performance. We present evidence that complex shapes reduce repeatability, highlighting the need to explore different sources of variation that could lead to such low repeatability. Lastly, we suggest some recommendations to improve the repeatability and reliability of geometric morphometrics results.


2013 ◽  
Vol 16 (2) ◽  
pp. 590-600 ◽  
Author(s):  
Paul G. Sanfilippo ◽  
Alex W. Hewitt ◽  
Jenny A. Mountain ◽  
David A. Mackey

Twin studies are extremely useful for investigating hypotheses of genetic influence on a range of behavioral and physical traits in humans. Studies of physical traits, however, are usually limited to size-related biological characteristics because it is inherently difficult to quantify the morphological counterpart – shape. In recent years, the development of geometry-preserving analytical techniques built upon multivariate statistical methodologies has produced a new discipline in biological shape analysis known as geometric morphometrics. In this study of hand shape analysis, we introduce the reader already familiar with the field of twin research to the potential utility of geometric morphometrics and demonstrate the cross-discipline applicability of methods. We also investigate and compare the efficacy of the 2D:4D ratio, a commonly used marker of sexual dimorphism, to the fully multivariate approach of shape analysis in discriminating between male and female sex. Studies of biological shape variation utilizing geometric morphometric techniques may be completed with software freely available on the Internet and time invested to master the small learning curve in concepts and theory.


Mammalia ◽  
2017 ◽  
Vol 81 (2) ◽  
Author(s):  
Luíza Z. Magnus ◽  
Nilton Cáceres

AbstractTribosphenic molars are considered great innovations in mammals and are related to several structures and variables that can explain adaptation. The aim of this study was to investigate the importance of body size and habitat relation, using a phylogenetic approach, in the first lower molar shape in didelphid marsupials. Geometric morphometric analyses of the lower molar’s shape were performed on 261 specimens, 130 females and 131 males, covering 14 genera and 37 species of the Didelphidae family. The molar conformation showed a larger talonid in relation to the trigonid in more arboreal genera, and narrower and longer molars in genera with a larger body size. Phylogeny was the variable with the highest explanation for both females and males (16.17% and 9.02%, respectively). The body size was significant in males, presenting an important influence on molar shape, while the body size in females was not significant when phylogenetic relationship was controlled for. In both sexes, habitat presents a strong effect of phylogeny, with no direct effect on molar shape. Didelphid molar shape is another result of its phylogenetic history and does not respond very much to environmental pressures. Male body size influences molar shape in didelphids, even in the presence of a strong phylogenetic signal.


2011 ◽  
Vol 2011 ◽  
pp. 1-8 ◽  
Author(s):  
Michaela Kerschbaumer ◽  
Christian Sturmbauer

Fishes of the family Cichlidae are famous for their spectacular species flocks and therefore constitute a model system for the study of the pathways of adaptive radiation. Their radiation is connected to trophic specialization, manifested in dentition, head morphology, and body shape. Geometric morphometric methods have been established as efficient tools to quantify such differences in overall body shape or in particular morphological structures and meanwhile found wide application in evolutionary biology. As a common feature, these approaches define and analyze coordinates of anatomical landmarks, rather than traditional counts or measurements. Geometric morphometric methods have several merits compared to traditional morphometrics, particularly for the distinction and analysis of closely related entities. Cichlid evolutionary research benefits from the efficiency of data acquisition, the manifold opportunities of analyses, and the potential to visualize shape changes of those landmark-based methods. This paper briefly introduces to the concepts and methods of geometric morphometrics and presents a selection of publications where those techniques have been successfully applied to various aspects of cichlid fish diversification.


Sign in / Sign up

Export Citation Format

Share Document