X-ray topo-tomography studies of linear dislocations in silicon single crystals

2018 ◽  
Vol 51 (6) ◽  
pp. 1616-1622 ◽  
Author(s):  
Victor Asadchikov ◽  
Alexey Buzmakov ◽  
Felix Chukhovskii ◽  
Irina Dyachkova ◽  
Denis Zolotov ◽  
...  

This article describes complete characterization of the polygonal dislocation half-loops (PDHLs) introduced by scratching and subsequent bending of an Si(111) crystal. The study is based on the X-ray topo-tomography technique using both a conventional laboratory setup and the high-resolution X-ray image-detecting systems at the synchrotron facilities at KIT (Germany) and ESRF (France). Numerical analysis of PDHL images is performed using the Takagi–Taupin equations and the simultaneous algebraic reconstruction technique (SART) tomographic algorithm.

2011 ◽  
Vol 2011 ◽  
pp. 1-7
Author(s):  
Hengyong Yu ◽  
Changguo Ji ◽  
Ge Wang

To maximize the time-integrated X-ray flux from multiple X-ray sources and shorten the data acquisition process, a promising way is to allow overlapped projections from multiple sources being simultaneously on without involving the source multiplexing technology. The most challenging task in this configuration is to perform image reconstruction effectively and efficiently from overlapped projections. Inspired by the single-source simultaneous algebraic reconstruction technique (SART), we hereby develop a multisource SART-type reconstruction algorithm regularized by a sparsity-oriented constraint in the soft-threshold filtering framework to reconstruct images from overlapped projections. Our numerical simulation results verify the correctness of the proposed algorithm and demonstrate the advantage of image reconstruction from overlapped projections.


2019 ◽  
Author(s):  
M-W. Peng ◽  
Y. Guan ◽  
J-H. Liu ◽  
L. Chen ◽  
H. Wang ◽  
...  

AbstractAnaerobic ammonium-oxidizing (anammox) bacteria play a key role in the global nitrogen cycle and the treatment of nitrogenous wastewater. These functions are closely related to the unique biophysical structure of anammox bacteria. However, the research on the biophysical ultrastructure of intact anammox bacteria is lacking. In this study, in-situ three-dimensional nondestructive ultrastructure imaging of whole anammox cell was performed using synchrotron soft X-ray nano-computed tomography and the total variation-based simultaneous algebraic reconstruction technique (TV-SART). Statistical and quantitative analyses of the ultrastructures of intact anammox bacteria were performed. The linear absorption coefficient values of the ultrastructures of anammox bacteria were calculated and the asymmetric structure of the anammox bacteria was quantified. On this basis, the shape adaptation of the anammox bacteria responses to Fe2+ were explored, and the underlying regulation mechanism of Fe2+ on anammox bacteria was explored. Furthermore, a promising method to study the biophysical properties of cells in different environments and engineering processes was proposed.Graphical AbstractStatement of SignificanceAnaerobic ammonium-oxidizing (anammox) bacteria play key role in global nitrogen cycle, and this physiological function depends on the unique morphology of anammox bacteria. In this study, synchrotron soft-X ray imaging technique coupled with simultaneous algebraic reconstruction technique with total variation (SART-TV) algorithm were performed to quantify the three-dimensional ultrastructure of the whole anammox bacteria for the first time. On this basis, the shape adaptation and mechanism of the anammox bacteria responses to Fe2+ were explored and a promising method for detecting the physiological properties of anammox bacteria was proposed.


2018 ◽  
Vol 139 ◽  
pp. 75-82 ◽  
Author(s):  
A.H. Galmed ◽  
A. du Plessis ◽  
S.G. le Roux ◽  
E. Hartnick ◽  
H. Von Bergmann ◽  
...  

2015 ◽  
Vol 48 (2) ◽  
pp. 528-532 ◽  
Author(s):  
Peter Zaumseil

The occurrence of the basis-forbidden Si 200 and Si 222 reflections in specular X-ray diffraction ω–2Θ scans is investigated in detail as a function of the in-plane sample orientation Φ. This is done for two different diffractometer types with low and high angular divergence perpendicular to the diffraction plane. It is shown that the reflections appear for well defined conditions as a result of multiple diffraction, and not only do the obtained peaks vary in intensity but additional features like shoulders or even subpeaks may occur within a 2Θ range of about ±2.5°. This has important consequences for the detection and verification of layer peaks in the corresponding angular range.


1997 ◽  
Vol 07 (03n04) ◽  
pp. 265-275
Author(s):  
R. Q. Zhang ◽  
S. Yamamoto ◽  
Z. N. Dai ◽  
K. Narumi ◽  
A. Miyashita ◽  
...  

Natural FeTiO 3 (illuminate) and synthesized FeTiO 3, single crystals were characterized by Rutherford backscattering spectroscopy combined with channeling technique and particle-induced x-ray emission (RBS-C and PIXE). The results obtained by the ion beam analysis were supplemented by the x-ray diffraction analysis to identify the crystallographic phase. Oriented single crystals of synthesized FeTiO 3 were grown under the pressure control of CO 2 and H 2 mixture gas using a single-crystal floating zone technique. The crystal quality of synthesized FeTiO 3 single crystals could be improved by the thermal treatment but the exact pressure control is needed to avoid the precipitation of Fe 2 O 3 even during the annealing procedure. Natural FeTiO 3 contains several kinds of impurities such as Mn , Mg , Na and Si . The synthesized samples contain Al , Si and Na which are around 100 ppm level as impurities. The PBS-C results of the natural sample imply that Mn impurities occupy the Fe sublattice in FeTiO 3 or in mixed phase between ilmenite and hematite.


2007 ◽  
Vol 352 (1) ◽  
pp. 25-34 ◽  
Author(s):  
M. Bazzan ◽  
N. Argiolas ◽  
C. Sada ◽  
P. Mazzoldi ◽  
S. Grilli ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document