Modeling of energy-dispersive X-ray diffraction for high-symmetry crystal orientation

2019 ◽  
Vol 75 (1) ◽  
pp. 63-70
Author(s):  
Danut Dragoi ◽  
Alexandru Dragoi
Keyword(s):  
Crystal Orientation ◽  
Incident Beam ◽  
Energy Dispersive ◽  
High Symmetry ◽  
X Ray Diffraction ◽  
X Ray ◽  
Reduced Gradient Method ◽  
Reduced Gradient ◽  
Generalized Reduced Gradient ◽  
Crystallographic Planes

The methods for X-ray crystal orientation are rapidly evolving towards versatility, fewer goniometry measurements, automation, high accuracy and precision. One method that attracts a lot of attention is energy-dispersive X-ray diffraction (EDXRD) which is based on detecting reflections from crystallographic planes in a crystal at fixed angles of a parallel polychromatic X-ray incident beam. In theory, an EDXRD peak can move in a diffraction pattern as a function of a crystallographic plane d-spacing and its orientation relative to a fixed direction in space can change also. This is equivalent to the possibility of measuring the orientation of single crystals. The article provides a modeling for the EDXRD method whose main feature is the nonmoving crystal in the sense of traditional goniometry where the angle measurements of diffracting planes are a must. The article defines the equation of orientation for the method and shows the derivation in great detail. It is shown that the exact solutions of the equations can be obtained using the generalized reduced gradient method, a mathematical subroutine that is implemented in Excel software. The significance and scientific impact of the work are discussed along with the validated tested results.

Structural Characterization of Gallbladder Stones Using Energy Dispersive X-ray Spectroscopy and X-ray Diffraction

2018 ◽  
Vol 21 (7) ◽  
pp. 495-500 ◽  
Author(s):  
Hassan A. Almarshad ◽  
Sayed M. Badawy ◽  
Abdalkarem F. Alsharari
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Energy Dispersive ◽  
Spectroscopic Techniques ◽  
X Ray Diffraction ◽  
Major Health Problem ◽  
X Ray ◽  
Gallbladder Stones ◽  
Pure Cholesterol ◽  
Scanning Electron

Aim and Objective: Formation of the gallbladder stones is a common disease and a major health problem. The present study aimed to identify the structures of the most common types of gallbladder stones using X-ray spectroscopic techniques, which provide information about the process of stone formation. Material and Method: Phase and elemental compositions of pure cholesterol and mixed gallstones removed from gallbladders of patients were studied using energy-dispersive X-ray spectroscopy combined with scanning electron microscopy analysis and X-ray diffraction. Results: The crystal structures of gallstones which coincide with standard patterns were confirmed by X-ray diffraction. Plate-like cholesterol crystals with laminar shaped and thin layered structures were clearly observed for gallstone of pure cholesterol by scanning electron microscopy; it also revealed different morphologies from mixed cholesterol stones. Elemental analysis of pure cholesterol and mixed gallstones using energy-dispersive X-ray spectroscopy confirmed the different formation processes of the different types of gallstones. Conclusion: The method of fast and reliable X-ray spectroscopic techniques has numerous advantages over the traditional chemical analysis and other analytical techniques. The results also revealed that the X-ray spectroscopy technique is a promising technique that can aid in understanding the pathogenesis of gallstone disease.

Selective catalytic reduction of NO by Co-Mn based nanocatalysts

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Vahid Zabihi ◽  
Mohammad Hasan Eikani ◽  
Mehdi Ardjmand ◽  
Seyed Mahdi Latifi ◽  
Alireza Salehirad
Keyword(s):  
Selective Catalytic Reduction ◽  
Catalytic Reduction ◽  
Energy Dispersive ◽  
Diffraction Field ◽  
X Ray Diffraction ◽  
X Ray ◽  
Analysis Techniques ◽  
Acidic Sites ◽  
Temperature Window ◽  
Temperature Programmed

Abstract One of the most significant aspects in selective catalytic reduction (SCR) of nitrogen oxides (NOx) is developing suitable catalysts by which the process occurs in a favorable way. At the present work SCR reaction by ammonia (NH3-SCR) was conducted using Co-Mn spinel and its composite with Fe-Mn spinel, as nanocatalysts. The nanocatalysts were fabricated through liquid routes and then their physicochemical properties such as phase composition, degree of agglomeration, particle size distribution, specific surface area and also surface acidic sites have been investigated by X-ray diffraction, Field Emission Scanning Electron Microscope, Energy-dispersive X-ray spectroscopy, energy dispersive spectroscopy mapping, Brunauer–Emmett–Teller, temperature-programmed reduction (H2-TPR) and temperature-programmed desorption of ammonia (NH3-TPD) analysis techniques. The catalytic activity tests in a temperature window of 150–400 °C and gas hourly space velocities of 10,000, 18,000 and 30,000 h−1 revealed that almost in all studied conditions, CoMn2O4/FeMn2O4 nanocomposite exhibited better performance in SCR reaction than CoMn2O4 spinel.

scholarly journals Energy dispersive X-ray diffraction (EDXRD) for operando materials characterization within batteries

2020 ◽  
Vol 22 (37) ◽  
pp. 20972-20989 ◽  
Author(s):  
Amy C. Marschilok ◽  
Andrea M. Bruck ◽  
Alyson Abraham ◽  
Chavis A. Stackhouse ◽  
Kenneth J. Takeuchi ◽  
...  
Keyword(s):  
Materials Characterization ◽  
Energy Dispersive ◽  
System Level ◽  
X Ray Diffraction ◽  
X Ray ◽  
Non Destructive ◽  
Non Destructive Characterization

This review highlights the efficacy of EDXRD as a non-destructive characterization tool in elucidating system-level phenomena for batteries.

Phase composition depth profiles using spatially resolved energy dispersive X-ray diffraction

2004 ◽  
Vol 37 (6) ◽  
pp. 967-976 ◽  
Author(s):  
Andrew C. Jupe ◽  
Stuart R. Stock ◽  
Peter L. Lee ◽  
Nikhila N. Naik ◽  
Kimberly E. Kurtis ◽  
...  
Keyword(s):  
Phase Composition ◽  
Spatial Resolution ◽  
Zinc Coating ◽  
High Energy ◽  
Sulfate Attack ◽  
Energy Dispersive ◽  
X Ray Diffraction ◽  
X Ray ◽  
Spatially Resolved ◽  
Composition Profiles

Spatially resolved energy dispersive X-ray diffraction, using high-energy synchrotron radiation (∼35–80 keV), was used nondestructively to obtain phase composition profiles along the radii of cylindrical cement paste samples to characterize the progress of the chemical changes associated with sulfate attack on the cement. Phase distributions were acquired to depths of ∼4 mm below the specimen surface with sufficient spatial resolution to discern features less than 200 µm thick. The experimental and data analysis methods employed to obtain quantitative composition profiles are described. The spatial resolution that could be achieved is illustrated using data obtained from copper cylinders with a thin zinc coating. The measurements demonstrate that this approach is useful for nondestructively visualizing the sometimes complex transformations that take place during sulfate attack on cement-based materials. These transformations can be spatially related to microstructure as seen by computed microtomography.

Synthesis of Supergrowth VACNTs and Nanostructured ZnO by Immerse Method

2011 ◽  
Vol 312-315 ◽  
pp. 1044-1048
Author(s):  
Salina Muhamad ◽  
Abu Bakar Suriani ◽  
Mohamad Zainizan Sahdan ◽  
Anuar Ahmad ◽  
Yosri M. Siran ◽  
...  
Keyword(s):  
Crystal Orientation ◽  
Zinc Nitrate ◽  
Zinc Nitrate Hexahydrate ◽  
Nitrate Hexahydrate ◽  
X Ray Diffraction ◽  
Vertically Aligned Carbon Nanotubes ◽  
X Ray ◽  
Aligned Carbon Nanotubes ◽  
Vertically Aligned ◽  
Physical Changes

In this paper, the study of supergrowth VACNTs after being immersed in zinc oxide solution were presented. Vertically aligned carbon nanotubes (VACNTs) were first deposited on silicon with the orientation of [1 0 0] before being immersed in an aqueous solution of zinc nitrate hexahydrate and hexamethylenetetramine. Physical changes have been observed by scanning electron microscopy, SEM in the VACNTs, where the significant expansion of length of up to almost 0.8 mm was achieved after the immersion of 4.5 hr. The supergrowth of VACNTs was observed and analyzed by energy dispersive x-ray spectroscopy, EDX to substantiate the incorporation of CNTs and ZnO of the sample. Raman spectroscopy and x-ray diffraction, XRD were used to inspect the crystal orientation to support our findings.

Sign in / Sign up

Export Citation Format

Share Document