The relationship between innovation and informal entrepreneurship: evidence from a developing country

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Yeri Tordecilla Avila ◽  
Jana Schmutzler ◽  
Patricia Beatriz Marquez Rodriguez ◽  
Eduardo Gómez Araujo

PurposeThis paper aims to evaluate whether entrepreneurs with an innovative product/service are more likely to formally register their businesses. Understanding the decision of business registration as a rational choice of the entrepreneurs, where she weighs the costs versus the benefits of such formalization, the study expands the literature on informal entrepreneurship by looking at the benefit-side rather than the typically evaluated cost-side of an individual cost-benefit evaluation.Design/methodology/approachThe authors relied on the Global Entrepreneurship Monitor (GEM) adult population survey to evaluate the hypothesis. Specifically, the authors used the GEM data of 2016 for Colombia, covering 2,069 observations (a representative sample at the country level), evaluating the relationship between innovativeness and business registration for the early stage of the entrepreneurial process. Given the nature of our dependent variable, the authors estimated a logistic regression model.FindingsDifferent from what the authors hypothesized, they did not find empirical evidence for a positive correlation between an innovative product or service and business registration. Instead, businesses that compete with many others offering the same product/service have a higher tendency to register at the Chamber of Commerce. Contrarily of what might be suspected, opportunity-based entrepreneurship – as opposed to necessity-based – is not a relevant variable when formalizing a business, providing evidence for our hypothesis that necessity-based entrepreneurship cannot be equalized with informal entrepreneurship. Additionally, the authors show that an entrepreneur with higher socioeconomic status is more likely to register his company.Research limitations/implicationsThe results provide first exploratory evidence that the benefit evaluation may play a role in formalizing a start-up, thus calling for future research that not only tackles the influence of registration costs and administrative burden but rather looks at the outcome of a cost-benefit analysis. The data imply several limitations which future research should address: variables measuring the innovativeness of the product/service are rather coarse measures and need to be expanded and detailed in future research. Additionally, the authors acknowledge that a relatively high number of missing values may generate a selection bias in our population sample. Finally, because of situating the research in a developing country, the research results may lack generalizability. Therefore, researchers are encouraged to test the proposed propositions further.Practical implicationsIn a country like Colombia with very high levels of informality, it is necessary that the government fully understands the role of innovation in the formalization process of start-ups. The results indicate that a differentiation of support mechanisms to increase the formalization of businesses according to the different stages of their development may be necessary and that aside from costs, benefits of formalization play a role. A higher level of formality is not only related to economic growth but also much better protection of workers, therefore going beyond the reduction of registration costs and the implied administrative burden should be an additional public policy target for decreasing informality. Finally, the correlation of socioeconomic stratum with the decision to register hints at a varying evaluation of formalization, a point that merits attention by government and academia.Originality/valueThe study shifts the focus from the evaluation of solely costs for business registering as a barrier to start-up formalization to the cost-benefit analysis. The authors propose – and show – that such an evaluation is not generalizable for all kinds of business. Specifically, the authors show that a start-up is more likely to register when it competes with a large number of competitors than when it competes with a smaller number of others offering the same. At the same time, the authors also show that the stage at which the start-up company is at influences the decision to formalize.

2015 ◽  
Vol 63 (1) ◽  
pp. 1-8 ◽  
Author(s):  
Xianming Shi ◽  
Greg Hansen ◽  
Monty Mills ◽  
Scott Jungwirth ◽  
Yan Zhang

Purpose – This paper aims to report the best practices of deicer corrosion control adopted by the Washington State Department of Transportation (WSDOT) to preserve the performance, reliability and value of its highway maintenance equipment assets. Design/methodology/approach – To enable quantitative analyses, data were collected from a site visit to WSDOT, as well as from a survey of maintenance practitioners from various transportation agencies. The direct costs related to equipment corrosion aggravated by the exposure to roadway deicers were analyzed, along with the direct benefits of mitigating such corrosion, using WSDOT as a case study. In addition, the same preliminary cost benefit analysis was conducted for an “average” Department of Transportation in a northern climate. Findings – Both cases show a highly favorable benefit-to-cost ratio for enhanced investment in controlling the risk of deicer corrosion. Research limitations/implications – It has not yet been possible to confirm this compelling argument because the analysis is partly based on assumptions instead of fully based on actual data. Practical implications – This work highlights the need to collect the relevant data such that future analysis and sensitivity analysis can be substantiated with actual data on costs and benefits. It concludes with a few suggestions for implementation. Originality/value – Many components in highway maintenance equipment fleet are at the risk of metallic corrosion, which is exacerbated in service environments where roadway deicers have been applied. This work lays the foundation for future research into this important issue.


1993 ◽  
Vol 31 (11) ◽  
pp. 41-44

The relationship between drug costs and treatment choices was the subject of the first annual Drug and Therapeutics Bulletin symposium held in March 1993.* In a time of severe financial constraints for the NHS it is important that the money available is well spent. In the case of treatment that means the benefits must be worth the cost. There is, however, no agreed way of deciding when a particular health benefit to an individual is worth the cost to the NHS. Drug prices are easier to measure and more consistent than the prices of other treatments, and may be more amenable to cost-benefit analysis. Treatment choices are made primarily by doctors but with critical input from patients, pharmacists, nurses and health service managers. In this article we give an overview of the symposium at which speakers described ways in which drug costs and treatment choices were tackled in general practice (Ann McPherson, John Howie), in hospital (Dorothy Anderson), in clinical research and audit (Iain Chalmers, Alison Frater), by consumers (Anna Bradley), by health economists (Mike Drummond) and by government (Joe Collier). We also take into account points raised in discussion by the participants.


2014 ◽  
Vol 41 (6) ◽  
pp. 808-820 ◽  
Author(s):  
David John Evans ◽  
Erhun Kula ◽  
Yoko Nagase

Purpose – The purpose of this paper is to estimate survey-based values of the elasticity of marginal social valuation of income, an important welfare parameter in cost-benefit analysis. Design/methodology/approach – A model relating equity welfare weights to income is developed, and iso-elasticity of marginal valuation of income is tested using survey data obtained from a sample of Turkish politicians who are instrumental in policy making. Findings – Based on the survey feedback, formal statistical testing indicates that Turkish politicians, regardless of party allegiance, reveal preferences consistent with an iso-elastic marginal social valuation of income. The estimated value of the elasticity measure is close to unity for each of the political parties. Originality/value – The originality of the paper is in terms of the survey method used to obtain from Turkish politicians estimates of the marginal social valuation of income. This welfare parameter is needed in the calculation of both social discount rates and welfare weights. The paper will be of interest to academics in the field of welfare economics as well as to practitioners involved in the appraisal of social projects and policies.


2019 ◽  
Vol 9 (2) ◽  
pp. 1-20
Author(s):  
Amol S Dhaigude ◽  
Soham Ray ◽  
Dhrubojit Konwar

Learning outcomes This case has four major learning outcomes using hands-on spreadsheet tool. First is to introduce and apply the Clarke and Wright’s Savings algorithm. Second is to conduct a cost-benefit analysis in transportation set up. Third is to find out the optimal route to be taken to fulfill given demand while satisfying time and capacity constraints. Finally, one has to optimize the number of vehicles required for daily operations. Case overview/synopsis Dhruvam, the protagonist of the case, working at ZeNXL, a third-party logistics service provider, was assigned the task of reducing the operational cost of the company as part of the new service offering called “Route optimization.” This new offering would help optimize vehicle delivery routes to meet daily customer demand. The launch of the new service offering was due in the next 10 days with client LG Electronics to be the first beneficiary. Complexity academic level MBA-1 (Logistics Management), MBA-2 (Route Optimization). This case provides an opportunity for instructors to introduce vehicle routing and scheduling as part of logistics management. Students are expected to use the data given in the case and exhibits to develop the optimal routes (using Clarke and Wright’s Savings algorithm) and conduct cost-benefit analysis. This case also provides insights on the challenges associated with start-up operations. Supplementary materials Teaching Notes are available for educators only. Please contact your library to gain login details or email [email protected] to request teaching notes. Subject code CSS 9: Operations and Logistics


2018 ◽  
Vol 118 (1) ◽  
pp. 96-125 ◽  
Author(s):  
Mengru Tu ◽  
Ming K. Lim ◽  
Ming-Fang Yang

Purpose The purpose of this paper is threefold: to present internet of things (IoT)-based cyber-physical system (CPS) architecture framework to facilitate the integration of IoT and CPS; to implement an IoT-based CPS prototype based on the architecture framework for a PL application scenario of in a case study; and to devise evaluation methods and conduct experimental evaluations on an IoT-based CPS prototype. Design/methodology/approach The design research method, case study, emulation experiment method, and cost-benefit analysis are applied in this research. An IoT-based CPS architecture framework is proposed, and followed by the development of prototype system and testbed platform. Then, the emulation and experimental evaluation of IoT-based CPS are conducted on the testbed, and the experimental results are analyzed. Findings The emulation experiment results show that the proposed IoT-based CPS outperforms current barcode-based system regarding labor cost, efficiency, and operational adaptiveness. The evaluation of the IoT-based CPS prototype indicates significant improvements in PL tasks and reduced part inventory under a dynamic changing shop-floor environment. Practical implications The case study shows that the proposed architecture framework and prototype system can be applied to many discrete manufacturing industries, such as automobile, airplane, bicycle, home appliance, and electronics. Originality/value The proposed IoT-based CPS is among the first to address the need to integrate IoT and CPS for PL applications, and to conduct experimental evaluations and cost-benefit analysis of adopting IoT-based CPS for PL. This paper also contributes to the IoT research by using diverse research methods to offer broader insights into understanding IoT and CPS.


2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Shailendra Kumar ◽  
Mohd. Suhaib ◽  
Mohammad Asjad

PurposeThe study aims to analyze the barriers in the adoption of Industry 4.0 (I4.0) practices in terms of prioritization, cluster formation and clustering of empirical responses, and then narrowing them with identification of the most influential barriers for further managerial implications in the adoption of I4.0 practices by developing an enhanced understanding of I4.0.Design/methodology/approachFor the survey-based empirical research, barriers to I.40 are synthesized from the review of relevant literature and further discussions with academician and industry persons. Three widely acclaimed statistical techniques, viz. principal component analysis (PCA), fuzzy analytical hierarchical process (fuzzy AHP) and K-means clustering are applied.FindingsThe novel integrated approach shows that lack of transparent cost-benefit analysis with clear comprehension about benefits is the major barrier for the adoption of I4.0, followed by “IT infrastructure,” “Missing standards,” “Lack of properly skilled manpower,” “Fitness of present machines/equipment in the new regime” and “Concern to data security” which are other prominent barriers in adoption of I4.0 practices. The availability of funds, transparent cost-benefit analysis and clear comprehension about benefits will motivate the business owners to adopt it, overcoming the other barriers.Research limitations/implicationsThe present study brings out the new fundamental insights from the barriers to I4.0. The new insights developed here will be helpful for managers and policymakers to understand the concept and barriers hindering its smooth implementation. The factors identified are the major thrust areas for a manager to focus on for the smooth implementation of I4.0 practices. The removal of these barriers will act as a booster in the way of implementing I4.0. Real-world testing of findings is not available yet, and this will be the new direction for further research.Practical implicationsThe new production paradigm is highly complex and evolving. The study will act as a handy tool for the implementing manager for what to push first and what to push later while implementing the I4.0 practices. It will also empower a manager to assess the implementation capabilities of the industry in advance.Originality/valuePCA, fuzzy AHP and K means are deployed for identifying the significant barriers to I4.0 first time. The paper is the result of the original conceptual work of integrating the three techniques in the domain of prioritizing and narrowing the barriers from 16 to 6.


2007 ◽  
Vol 20 (3) ◽  
pp. 119-124 ◽  
Author(s):  
Glen Holt

PurposeAims to focus on the issue of value in libraries.Design/methodology/approachDraws from research conducted to set up a conservative transportable cost‐benefit analysis (CBA) methodology that could be applied to public libraries. The paper discusses the CBA‐survey participant comments draws out the value themes that interviewees talked about as they answered various questions.FindingsThere is a huge tendency in North America to talk about libraries as if they are secular churches and to impute spiritual values to them. This paper suggests that while library users may hold such feelings, that is not the first line of reasons for why they use their library.Originality/valueShows how library communications needs to be framed in the practical as well as the ethereal, the practical along with the ideal.


2016 ◽  
Vol 29 (3) ◽  
pp. 255-270 ◽  
Author(s):  
Michiel De Vries ◽  
Iwona Sobis

Purpose – The purpose of this paper is to argue that the analysis of corruption must distinguish between corruption in organizations where this kind of behaviour is widespread and corruption in organizations where it is rare, and must also distinguish between corruption as the outcome of an economic cost-benefit analysis and corruption induced by social-psychological factors. Design/methodology/approach – This is a conceptual paper. Findings – In order to be effective in combating corruption, a fit is needed with the main determinants of corrupt behaviour: first, at the individual level in which either personal morality, social or economic considerations are at stake; second, at the organizational level in which social-psychological factors might be determinative; and third, at the contextual level in which economic prosperity, the nature of the political system and cultural features are important. Practical implications – Especially in systems where corruption is widespread, policymakers could benefit from theories in social psychology to combat corruption. Social implications – To see corruption as the result of an individual cost-benefit analysis or as a lack of morality often misses the point in cases of widespread corruption. Originality/value – The paper points at the added value of social psychology approach to corruption as compared to the approaches at present dominant in public administration.


2017 ◽  
Vol 11 (1) ◽  
pp. 19-34 ◽  
Author(s):  
Xiang Li ◽  
Ziyou Gao

Purpose Regenerative braking is an efficient energy saving technology in urban rail system, in which the recovery energy from braking trains is collected by some equipments and released to accelerating trains when needed. However, the high cost and low lifetime of storage devices prevent the widespread use of this technology. The purpose of this paper is to conduct thorough cost-benefit analysis to facilitate China’s urban rail companies to make decisions on the use of such technology. Design/methodology/approach To evaluate the benefit from regenerative energy storage, the authors formulate an improved integrated scheduling and speed control model to calculate the net energy consumption associated with different energy recovery rates and then define the benefit as the amount of energy saving arising from the usage of storage equipments. With the frequent charge/discharge operations on storage equipments, the energy recovery rate generally decreases which lowers the benefit, but the maintenance cost increases. By trading-off benefit and cost, the authors derive the optimal scrapping time, the maximum profit and the profitability condition for storage devices. Findings Simulation studies based on the Beijing Metro Yizhuang Line of China are given. The results show that compared with the current timetable and speed profile, the integrated scheduling and speed control approach with energy recovery rate of 0.5 can reduce the net energy consumption by 12.69 per cent; the net energy consumption can be well approximated as a linear function of energy recovery rate; and the maximum profit and the optimal scrapping time on regenerative energy storage devices are both positively related to the electricity price. The allowance proportion and the number of service trains such that busy lines with higher electricity price or allowance proportion have advantages to use the regenerative energy storage devices. Research limitations/implications In this work, a linear energy recovery rate and a linear maintenance cost are used in the cost-benefit analysis process. In future research, the more accurate expressions on energy recovery rate and maintenance cost should be considered if more data on recovery rate and maintenance cost can be gathered. Originality/value The main values of this paper are to develop the integrated optimization approaches for train scheduling and speed control and, on this basis, make thorough cost-benefit analysis for regenerative energy storage to improve the operations management of urban rail transit.


2012 ◽  
Vol 44 (2) ◽  
pp. 234-247 ◽  
Author(s):  
A. Díez-Herrero ◽  
J. A. Ballesteros-Cánovas ◽  
J. M. Bodoque ◽  
V. Ruiz-Villanueva

Dendrogeomorphology uses information sources recorded in the roots, trunks and branches of trees and bushes located in the fluvial system to complement (or sometimes even replace) systematic and palaeohydrological records of past floods. The application of dendrogeomorphic data sources and methods to palaeoflood analysis over nearly 40 years has allowed improvements to be made in frequency and magnitude estimations of past floods. Nevertheless, research carried out so far has shown that the dendrogeomorphic indicators traditionally used (mainly scar evidence), and their use to infer frequency and magnitude, have been restricted to a small, limited set of applications. New possibilities with enormous potential remain unexplored. New insights in future research of palaeoflood frequency and magnitude using dendrogeomorphic data sources should: (1) test the application of isotopic indicators (16O/18O ratio) to discover the meteorological origin of past floods; (2) use different dendrogeomorphic indicators to estimate peak flows with 2D (and 3D) hydraulic models and study how they relate to other palaeostage indicators; (3) investigate improved calibration of 2D hydraulic model parameters (roughness); and (4) apply statistics-based cost–benefit analysis to select optimal mitigation measures. This paper presents an overview of these innovative methodologies, with a focus on their capabilities and limitations in the reconstruction of recent floods and palaeofloods.


Sign in / Sign up

Export Citation Format

Share Document