Investigation of the current usage of BIM capabilities by large-sized building contractors in Kenya based on theory of innovation diffusion

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Joel Odhiambo Oyuga ◽  
Abednego Gwaya ◽  
Mugwima Bernard Njuguna
Keyword(s):  
Construction Industry ◽  
Innovation Diffusion ◽  
Relative Advantage ◽  
Strong Positive Correlation ◽  
User Characteristics ◽  
Construction Sites ◽  
Clear Trend ◽  
Content Type ◽  
Positive Correlation ◽  
Building Information

Purpose This study aims to focus on the four user characteristics of innovation diffusion (availability, observability and trialability [AOT], simplicity, relative advantage [RA] and interoperability) to observe their influence on building information modelling (BIM) usage. This study focuses on the Kenyan construction industry, specifically the building contractors. Design/methodology/approach This study uses purposive sampling and specifically focusses on active construction sites that met requirements needed for BIM usage to thrive. Data was collected manually using questionnaires (N = 62). Findings This paper contributes to the analysis of the current state of BIM usage by the Kenyan construction industry specifically among building contractors and confirms that Kenya is at the early majority adopters’ stage of diffusion characterised by low BIM usage. In terms of correlation, this study found out that AOT had a strong positive correlation with usage, RA had a moderate positive correlation with usage, simplicity had a weak positive correlation with usage and interoperability had no correlation with usage. Practical implications This study gives a clear trend on BIM usage among building contractors to assist potential BIM users make informed decision. The recommendations in this study can be adopted by any late adopter jurisdiction whose structure of the construction industry is similar to Kenya’s. Originality/value This paper highlights variables that enable or subdue BIM usage. It goes further to localise and contextualise the barriers for deeper understanding of what makes these barriers be major hindrances towards BIM usage and giving practical solutions to these barriers.

scholarly journals The adoption of 4D BIM in the UK construction industry: an innovation diffusion approach

2017 ◽  
Vol 24 (6) ◽  
pp. 950-967 ◽  
Author(s):  
Barry J. Gledson ◽  
David Greenwood
Keyword(s):  
Construction Industry ◽  
Innovation Diffusion ◽  
Diffusion Theory ◽  
Time Lag ◽  
Sampling Strategy ◽  
Future Research ◽  
Content Type ◽  
Innovation Diffusion Theory ◽  
Building Information ◽  
The Uk

Purpose British construction industry KPI data collected over recent years shows a trend in projects exceeding their time schedules. In 2013, the UK Government set a target for projects timeframes to reduce by 50 per cent. Proposed interventions included more rapid project delivery processes, and consistent improvements to construction delivery predictions, deployed within the framework of 4D Building Information Modelling (BIM). The purpose of this paper is to use Rogers’ Innovation Diffusion theory as a basis to investigate how this adoption has taken place. Design/methodology/approach In total, 97 construction planning practitioners were surveyed to measure 4D BIM innovation take-up over time. Classic innovation diffusion research methods were adopted. Findings Results indicated an increasing rate of 4D BIM adoption and reveal a time lag between awareness and first use that is characteristic of this type of innovation. Research limitations/implications Use of a non-probability sampling strategy prevents the results being generalisable to the wider construction population. Future research directions and methods are suggested, including qualitative investigations into decision-making processes around 4D BIM, and case studies exploring the consequences of 4D BIM adoption. Practical implications Recommendations of how to facilitate the adoption of 4D BIM innovation are proposed, which identify the critical aspects of system compatibility and safe trialling of the innovation. Originality/value This paper reinforces 4D BIM as an innovation and records its actual UK industry adoption rate using an accepted diffusion research method. By focusing on UK industry-wide diffusion the work also stands apart from more typical research efforts that limit innovation diffusion exploration to individual organisations.

scholarly journals Students’ awareness and perception of the value of BIM and 4D for site health and safety management

2019 ◽  
Vol 18 (2) ◽  
pp. 414-430 ◽  
Author(s):  
Mark Swallow ◽  
Sambo Zulu
Keyword(s):  
Higher Education ◽  
Construction Industry ◽  
Safety Management ◽  
Tertiary Education ◽  
Health And Safety ◽  
Rate Of Change ◽  
Construction Sites ◽  
Content Type ◽  
Building Information ◽  
Quasi Experimental

Purpose The education sector is at the forefront of developing tomorrow’s construction professionals. It is therefore important that with the current rate of change in the construction industry, education curriculum should be seen to be relevant. An area that is revolutionising the construction industry is the use of Building Information Modelling (BIM), including its potential for improving H&S on construction sites. This paper aims to focus on the perception of higher education (HE) students on the potential impact of 4D modelling on the management of site health and safety on construction sites. Design/methodology/approach A quasi-experimental approach was adopted to determine student’s perception of the extent to which 4D modelling and simulation can impact H&S management. Pre-test and post-test students’ perceptions of the value of 4D to management of health and safety were compared. Findings The influence of education was examined by using two main students groups, one group studying BIM modules within their course while the other group did not. Although minimal perception differences regarding key impacts of 4D were highlighted, the awareness differences were significant. The study demonstrated the perception of benefits regarding 4D for H&S being in the planning of site logistics, visualisation, programme accuracy and risk reduction. The study highlights the importance of relevant education, to increase awareness of 4D for Health and Safety. Originality/value While most of the studies reported in academic literature on education and training related to university/tertiary education, this study focused on the higher education level students. It considered this as an equally important cohort as the graduates will also contribute to health and safety management on construction sites. The study also demonstrated the value of including technology based H&S training to mirror developments in the construction industry.

Site managers’ ICT tools for monitoring resources in refurbishment

2019 ◽  
Vol 27 (1) ◽  
pp. 109-127 ◽  
Author(s):  
Ahmet Anıl Sezer ◽  
Jan Bröchner
Keyword(s):  
Construction Industry ◽  
Information And Communication Technologies ◽  
Postal Questionnaire ◽  
Content Type ◽  
Performance Expectancy ◽  
Use Of Technology ◽  
Building Information ◽  
Efficient Planning ◽  
Ict Tools ◽  
Site Managers

Purpose The purpose of this paper is to analyse site managers’ ICT preferences for monitoring resource use in refurbishment projects. Design/methodology/approach Information and communication technologies (ICT) developments for the construction industry are increasing the scope for more efficient planning and monitoring of refurbishment projects. The analysis is based on the unified theory of acceptance and the use of technology model. After a short initial survey, a Swedish web/postal questionnaire has received 78 responses from refurbishment site managers, implying a 34 per cent response rate. Findings Managerial choices related to ICT depend more on perceived performance expectancy than on effort expectancy. Large projects and larger firms are associated with more extensive ICT use. Site managers see little need to link to refurbishment clients’ ICT systems. Performance expectancy and age are found to influence ICT choices. Practical implications Site managers play a crucial role in everyday use of ICT tools in the construction industry. The outcome of this investigation is useful for developing digital support, including applications of building information modelling, to improve refurbishment site practices. Originality/value Much has been written about ICT support for new construction practices, but not much attention has been paid to refurbishment site managers’ media choices.

Relationship amongst ResearchGate altmetric indicators and Scopus bibliometric indicators

2015 ◽  
Vol 116 (9/10) ◽  
pp. 564-577 ◽  
Author(s):  
RISHABH SHRIVASTAVA ◽  
Preeti Mahajan
Keyword(s):  
Sample Size ◽  
Correlation Coefficients ◽  
Strong Positive Correlation ◽  
Bibliometric Indicators ◽  
Pearson’S Correlation ◽  
Content Type ◽  
Positive Correlation ◽  
Pearson's Correlation ◽  
Different Characteristics ◽  
The Relationship

Purpose – The purpose of this paper is twofold. First, the study aims to investigate the relationship between the altmetric indicators from ResearchGate (RG) and the bibliometric indicators from the Scopus database. Second, the study seeks to examine the relationship amongst the RG altmetric indicators themselves. RG is a rich source of altmetric indicators such as Citations, RGScore, Impact Points, Profile Views, Publication Views, etc. Design/methodology/approach – For establishing whether RG metrics showed the same results as the established sources of metrics, Pearson’s correlation coefficients were calculated between the metrics provided by RG and the metrics obtained from Scopus. Pearson’s correlation coefficients were also calculated for the metrics provided by RG. The data were collected by visiting the profile pages of all the members who had an account in RG under the Department of Physics, Panjab University, Chandigarh (India). Findings – The study showed that most of the RG metrics showed strong positive correlation with the Scopus metrics, except for RGScore (RG) and Citations (Scopus), which showed moderate positive correlation. It was also found that the RG metrics showed moderate to strong positive correlation amongst each other. Research limitations/implications – The limitation of this study is that more and more scientists and researchers may join RG in the future, therefore the data may change. The study focuses on the members who had an account in RG under the Department of Physics, Panjab University, Chandigarh (India). Perhaps further studies can be conducted by increasing the sample size and by taking a different sample size having different characteristics. Originality/value – Being an emerging field, not much has been conducted in the area of altmetrics. Very few studies have been conducted on the reach of academic social networks like RG and their validity as sources of altmetric indicators like RGScore, Impact Points, etc. The findings offer insights to the question whether RG can be used as an alternative to traditional sources of bibliometric indicators, especially with reference to a rapidly developing country such as India.

Analysing BIM implementation in the Egyptian construction industry

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Mohamed Marzouk ◽  
Heba Elsaay ◽  
Ayman Ahmed Ezzat Othman
Keyword(s):  
Construction Industry ◽  
Design Methodology ◽  
Information Modeling ◽  
Survey Questionnaire ◽  
Review Of Literature ◽  
Strategy Formulation ◽  
Content Type ◽  
Practical Strategy ◽  
Building Information ◽  
International Strategies

PurposeThis research is built up upon exploring the concepts of building information modeling (BIM) adoption and strategy formulation with the aim to develop a strategy for implementing BIM in the Egyptian construction industry.Design/methodology/approachThe development of the BIM implementation strategy was based on two pillars, namely the literature review and results of the survey questionnaire and interviews. First, the review of literature helped investigating the BIM challenges and international strategies developed to implement BIM worldwide.FindingsThe research presented recommendations to assist policymakers in Egypt to facilitate BIM implementation.Originality/valueAlthough multiple frameworks have been proposed to aid in BIM implementation, a practical strategy to implement BIM in Egypt is still lacking. Moreover, current market scale studies neglect nonsoftware aspects of BIM adoption, do not identify market gaps or reflect market-specific criteria. As such, it cannot be used by policymakers to facilitate BIM diffusion.

Building information modelling (BIM) and the return on investment: a systematic analysis

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Apeesada Sompolgrunk ◽  
Saeed Banihashemi ◽  
Saeed Reza Mohandes
Keyword(s):  
Construction Industry ◽  
Return On Investment ◽  
Research Work ◽  
Value Drivers ◽  
Productivity Improvement ◽  
Building Information Modelling ◽  
Content Type ◽  
Factors Affecting ◽  
Information Modelling ◽  
Building Information

Purpose The purpose of this study is to identify and analyse the key measurable returning factors, value drivers and strategic benefits associated with building information modelling (BIM) return on investment (ROI). The findings of this study provide researchers and practitioners with up-to-date information in formulating appropriate strategies to quantify the monetary value of BIM. The suggested research agenda provided would also advance what is presently a limited body of knowledge relating to the evaluation of BIM ROI. Design/methodology/approach To fill the identified gap, this study develops a comprehensive systematic review of mainstream studies on factors affecting BIM ROI published from 2000 to 2020. A total of 23 academic records from different sources such as journals, conference proceedings, dissertation and PhD theses were identified and thoroughly reviewed. Findings The reported BIM ROI ranged greatly from −83.3% to 39,900%. A total of 5 returning factors, namely, schedule reduction and compliance, productivity improvement, request for information reduction, rework reduction and change orders reduction were identified as the most commonly reported factors that influence BIM ROI. Four quantification techniques including general assumptions-based theoretical model, perceived BIM ROI based on survey, factors affecting BIM ROI with no reported ROI and quantified BIM ROI based on a case study were observed and pointed out in the review, together with their limitations. Finally, three major gaps were raised as the lack of consideration on the likelihood of BIM assisting in a construction project, intangible returning factors influencing BIM-based projects and industry standards in benchmarking BIM ROI. Practical implications The outcomes of this study would assist practitioners by providing the current evaluation techniques that address the limitations with BIM investment and present issues relating to the economic evaluation of BIM in the construction industry. It is also expected that presenting a deeper and wider perspective of the research work performed until now will direct a more focussed approach on productivity improvement efforts in the construction industry. Originality/value This study identifies and analyses the key measurable returning factors, value drivers and strategic benefits associated with BIM ROI on an industry scale rather than a particular organisation or a project scale.

Emerging technical risks from the application of building information modelling

2020 ◽  
Vol 18 (3) ◽  
pp. 195-212
Author(s):  
Moshabab Aljarman ◽  
Halim Boussabaine ◽  
Khalid Almarri
Keyword(s):  
Construction Industry ◽  
Primary Data ◽  
Successful Implementation ◽  
Building Information Modelling ◽  
Content Type ◽  
Information Modelling ◽  
Building Information ◽  
Technical Risks ◽  
Software Platforms ◽  
Modelling Data

Purpose Building information modelling (BIM) is not without risk, as the greater reliance on information technology has associated technical risks. Thus, the purpose of this paper is to assess the perceptions of the users of BIM regarding the likelihood of emergence of technical risks which might influence the successful application of BIM, to facilitate the successful implementation of BIM in the construction industry. Design/methodology/approach The primary data were collected via a questionnaire to document the BIM risks, where 105 responses were recorded from constructors, consultants, cost consultants and other professionals from the UK construction industry. Subsequently, the analysis of the results was driven by univariate and inferential statistics (ANOVA) to assess the perception of risk emergence. Findings The study found the most likely technical risks that might emerge from BIM application. These risks are complexity of transferring modelling data from one program to another, lack of understanding of the BIM for the different software platforms, interoperability shortcomings, failure to discover errors in the model and risks of different software platforms. Practical implications The results will certainly intensify the discussion about BIM risks, risk allocation and all other aspects that are related to BIM contractual processes. Also, the compiled list of risks will help stakeholders in assessing financial implications that may result from BIM application. Originality/value Important technical risks have been identified in the application of BIM. This renders a new understanding of the risks that might influence the successful application of BIM. The respondents generally agreed on the importance of the following risks: “complexity of transferring modelling data between programs from one program to another”, “lack of understanding of the BIM for the different software platforms”, “interoperability shortcomings”, “failure to discover errors in the model” and “risks of different software platforms”, which are in line with current literature.

scholarly journals BIM and project planning integration for on-site safety induction

2017 ◽  
Vol 15 (03) ◽  
pp. 341-354 ◽  
Author(s):  
Abdulkadir A. Ganah ◽  
Godfaurd A. John
Keyword(s):  
Literature Review ◽  
Design Methodology ◽  
Health And Safety ◽  
Project Planning ◽  
Current Status ◽  
Construction Sites ◽  
Building Information Modelling ◽  
Content Type ◽  
Visual Tool ◽  
Building Information

Purpose The section of the research presented in this paper aims to review and explore health and safety (H&S) issues on construction sites. It has the sole intention of using better computer visualisation to meet the needs of site practitioners in understanding such H&S problems. Design/methodology/approach The methodology follows a traditional literature review approach to understand the development of building information modelling (BIM) technology up to its current status. A questionnaire survey was conducted to gather information on the embedding of H&S planning by site practitioners within the BIM environment. Findings BIM has the potential to be used in H&S planning procedures, particularly in those related to tasks on construction sites. A framework for an integrated visual tool is developed for better H&S practice on site. It may be used actively by all practitioners, starting with site induction and addresses, inter alia, personal hazard perception. Research limitations/implications This paper provides a foundation for developing a tool that helps construction personnel explore potential H&S risks on site before construction begins. By introducing a framework for integrating BIM and project planning, a prototype can be developed to demonstrate the application of the proposed framework. Originality/value The research presented in this paper introduces BIM usage during the construction stage as a tool that supports a H&S toolbox. The paper proposes the useful framework for better H&S practice on site that can be used actively by all practitioners. The intention is to find a way forward in addressing “real” H&S site issues that may not be easily understood by practitioners without the full aid of visualisation scenarios.

Applying innovation attributes to predict purchase intention for the eco-labeled products

2019 ◽  
Vol 11 (4) ◽  
pp. 583-599
Author(s):  
Sahar Hosseinikhah Choshaly
Keyword(s):  
Innovation Diffusion ◽  
Purchase Intention ◽  
Structural Model ◽  
Diffusion Theory ◽  
Measurement Model ◽  
Shopping Mall ◽  
Relative Advantage ◽  
Content Type ◽  
Innovation Diffusion Theory ◽  
Context Specific

Purpose This paper aims to make use of the innovation diffusion theory to predict the purchase intention for eco-labeled products. Design/methodology/approach Data are collected from 180 individuals in the Mid Valley shopping mall area in Malaysia. It is then analyzed using SPSS and Smart PLS. The measurement model is analyzed using composite reliability, convergent and discriminate validity, while the structural model is used to predict the relationships between variables. Findings Results indicate that the relative advantage, trialability and observability are positively related to eco-labeled products purchase intention, while the complexity is negatively related to eco-labeled products purchase intention. However, compatibility is not positively related to eco-labeled products purchase intention. Practical implications Marketers should enhance the observability of eco-labeled as it is the most influential attribute affecting eco-labeled products purchase intention. Relative advantages of eco-labeled products are also important to stimulate purchase intention. Marketers could best relate the innovation to context-specific use situations enabling consumers to evaluate the use consequences of the innovation, and therefore, may assess its particular benefits. Originality/value It explores the potential of a theoretical framework based on innovation diffusion theory to explain eco-labeled products purchase intention.

An enabling BIM block library: an online repository to facilitate social inclusion in Australia

2014 ◽  
Vol 14 (4) ◽  
pp. 477-492 ◽  
Author(s):  
Catherine Bridge ◽  
Phillippa Carnemolla
Keyword(s):  
Construction Industry ◽  
Research Methodology ◽  
Social Inclusion ◽  
Educational Impact ◽  
Full Spectrum ◽  
Building Information Modelling ◽  
Content Type ◽  
Building Information ◽  
Current Block ◽  
The Individual

Purpose – The purpose of this paper is to explore the implications of socially inclusive Building Information Modelling (BIM) library components. BIM requires and integrates many sets of predefined blocks or collection of attributes. Any one of the individual blocks can be replicated and/or stored in a block library for later reuse. However, few if any current block libraries contain or have access to the blocks that enable social inclusion. Design/methodology/approach – An action-based research methodology was used to design, develop and deploy three enabling blocks as part of a plan to develop a larger library of tools for BIM practitioners. The Enabling Block Library is an open access library of Australian code-compliant mobility elements published online. This paper discusses the design and development of the library components in detail, explaining how each of the three blocks was selected in our pilot evaluation and how each was identified; fact-checked; planned (designed); deployed (action); and then evaluated. Findings – The process and evaluation highlights that appropriate code-compliant design tools can support greater social inclusion aspects of a built environment project. These are tools that are relevant to the full spectrum of industry users of BIM, including designers, engineers and certifiers. Research limitations/implications – Because this paper documents the project while in an early launch phase, with a small number of launch blocks, the research results were limited in their ability to thoroughly measure industry or educational impact. However, the results showed how a socially inclusive BIM block library can be developed and why this is important, with literature supporting the potential of its dissemination to the design and construction industry. Originality/value – The paper applied action-based research methodology in the development, deployment and evaluation of exploratory BIM use to create more socially inclusive environments. It is of value because it facilitates designers creating the optimum of performance-based accessible environments, rather than the minimum “deemed to satisfy” Building Codes.

Sign in / Sign up

Export Citation Format

Share Document