Analysis of thermo-hydraulic and entropy generation characteristics for flow through ribbed-wavy channel

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Sumit Kumar Mehta ◽  
Sukumar Pati ◽  
Shahid Ahmed ◽  
Prangan Bhattacharyya ◽  
Jishnu Jyoti Bordoloi
Keyword(s):  
Reynolds Number ◽  
Laminar Flow ◽  
Entropy Generation ◽  
Relative Magnitude ◽  
Temperature Fields ◽  
Wavy Channel ◽  
Content Type ◽  
Flow Through ◽  
Numerical Solver ◽  
Wavy Channels

Purpose The purpose of this study is to analyze the thermal, hydraulic and entropy generation characteristics for laminar flow of water through a ribbed-wavy channel with the top wall as wavy and bottom wall as flat with ribs of three different geometries, namely, triangular, rectangular and semi-circular. Design/methodology/approach The finite element method-based numerical solver has been adopted to solve the governing transport equations. Findings A critical value of Reynolds number (Recri) is found beyond which, the average Nusselt number for the wavy or ribbed-wavy channel is more than that for a parallel plate channel and the value of Recri decreases with the increase in a number of ribs and for any given number of ribs, it is minimum for rectangular ribs. The performance factor (PF) sharply decreases with Reynolds number (Re) up to Re = 50 for all types of ribbed-wavy channels. For Re > 50, the change in PF with Re is gradual and decreases for all the ribbed cases and for the sinusoidal channel, it increases beyond Re = 100. The magnitude of PF strongly depends on the shape and number of ribs and Re. The relative magnitude of total entropy generation for different ribbed channels varies with Re and the number of ribs. Practical implications The findings of the present study are useful to design the economic heat exchanging devices. Originality/value The effects of shape and the number of ribs on the heat transfer performance and entropy generation have been investigated for the first time for the laminar flow regime. Also, the effects of shape and number of ribs on the flow and temperature fields and entropy generation have been investigated in detail.

Heat transfer enhancement using second mode self-oscillating structures

2019 ◽  
Vol 30 (7) ◽  
pp. 3827-3842
Author(s):  
Samer Ali ◽  
Zein Alabidin Shami ◽  
Ali Badran ◽  
Charbel Habchi
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Nusselt Number ◽  
Laminar Flow ◽  
Flow Regime ◽  
Vortex Generator ◽  
Reynolds Numbers ◽  
Content Type ◽  
Laminar Flow Regime ◽  
Second Mode

Purpose In this paper, self-sustained second mode oscillations of flexible vortex generator (FVG) are produced to enhance the heat transfer in two-dimensional laminar flow regime. The purpose of this study is to determine the critical Reynolds number at which FVG becomes more efficient than rigid vortex generators (RVGs). Design/methodology/approach Ten cases were studied with different Reynolds numbers varying from 200 to 2,000. The Nusselt number and friction coefficients of the FVG cases are compared to those of RVG and empty channel at the same Reynolds numbers. Findings For Reynolds numbers higher than 800, the FVG oscillates in the second mode causing a significant increase in the velocity gradients generating unsteady coherent flow structures. The highest performance was obtained at the maximum Reynolds number for which the global Nusselt number is improved by 35.3 and 41.4 per cent with respect to empty channel and rigid configuration, respectively. Moreover, the thermal enhancement factor corresponding to FVG is 72 per cent higher than that of RVG. Practical implications The results obtained here can help in the design of novel multifunctional heat exchangers/reactors by using flexible tabs and inserts instead of rigid ones. Originality/value The originality of this paper is the use of second mode oscillations of FVG to enhance heat transfer in laminar flow regime.

Local thermal non-equilibrium conjugate forced convection and entropy generation in an aircraft cabin with air channel partially filled porous insulation

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Oktay Çiçek ◽  
A. Cihat Baytaş
Keyword(s):  
Thermal Conductivity ◽  
Reynolds Number ◽  
Forced Convection ◽  
Cross Section ◽  
Entropy Generation ◽  
Channel Wall ◽  
Darcy Number ◽  
Content Type ◽  
Exit Cross Section ◽  
Air Channel

Purpose The purpose of this study is to numerically investigate heat transfer and entropy generation between airframe and cabin-cargo departments in an aircraft. The conjugate forced convection and entropy generation in a cylindrical cavity within air channel partly filled with porous insulation material as simplified geometry for airframe and cabin-cargo departments are considered under local thermal non-equilibrium condition. Design/methodology/approach The non-dimensional governing equations for fluid and porous media discretized by finite volume method are solved using the SIMPLE algorithm with pressure and velocity correction. Findings The effects of the following parameters on the problem are investigated; Reynolds number, Darcy number, the size of inlet and exit cross-section, thermal conductivity ratio for solid and fluid phases, angle between the vertical symmetry axis and the end of channel wall exit and the gap between adiabatic channel wall and horizontal adiabatic wall separating cabin and cargo sections. Originality/value This paper can provide a basic perspective and framework for thermal design between the fuselage and cabin-cargo sections. The minimum total entropy generation number is calculated for various Reynolds numbers and thermal conductivity ratios. It is observed that the channel wall temperature increases for high Reynolds number, low Darcy number, narrower exit cross-section and wider the gap between channel wall and horizontal.

Nanofluid flow and heat transfer due to natural convection in a semi-circle/ellipse annulus using modified lattice Boltzmann method

2019 ◽  
Vol 29 (12) ◽  
pp. 4746-4763 ◽  
Author(s):  
Qingang Xiong ◽  
Arash Khosravi ◽  
Narjes Nabipour ◽  
Mohammad Hossein Doranehgard ◽  
Aida Sabaghmoghadam ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Lattice Boltzmann Method ◽  
Entropy Generation ◽  
Lattice Boltzmann ◽  
Temperature Fields ◽  
Shape Effect ◽  
Nanofluid Flow ◽  
Content Type ◽  
Boltzmann Method

Purpose This paper aims to numerically investigate the nanofluid flow, heat transfer and entropy generation during natural convection in an annulus. Design/methodology/approach The lattice Boltzmann method is used to simulate the velocity and temperature fields. Furthermore, some special modifications are applied to make the lattice Boltzmann method capable for simulation in the curved boundary conditions. The annulus is filled with CuO-water nanofluid. The dynamic viscosity of nanofluid is estimated using KLL (Koo-Kleinstreuer-Li) model, and the nanoparticle shape effect is taken account in calculating the thermal conductivity. On the other hand, the local/volumetric entropy generation is used to show the irreversibility under influence of different parameters. Findings The effect of considered governing parameters including Rayleigh number (103<Ra < 106); nanoparticle concentration (0<<0.04) and configuration of annulus on the flow structure; temperature field; and local and total entropy generation and heat transfer rate are presented. Originality/value The originality of this work is using of lattice Boltzmann method is simulation of natural convection in a curved configuration and using of Koo–Kleinstreuer–Li correlation for simulation of nanofluid.

scholarly journals Heavy Oil Laminar Flow in Corrugated Ducts: A Numerical Study Using the Galerkin-Based Integral Method

Energies ◽  
2020 ◽  
Vol 13 (6) ◽  
pp. 1363
Author(s):  
Valdecir Alves dos Santos Júnior ◽  
Severino Rodrigues de Farias Neto ◽  
Antonio Gilson Barbosa de Lima ◽  
Igor Fernandes Gomes ◽  
Israel Buriti Galvão ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Reynolds Number ◽  
Laminar Flow ◽  
Heavy Oil ◽  
Integral Method ◽  
Numerical Study ◽  
Temperature Dependent ◽  
Flow Through ◽  
Fanning Friction Factor ◽  
Cylindrical Duct

Fluid flow in pipes plays an important role in different areas of academia and industry. Due to the importance of this kind of flow, several studies have involved circular cylindrical pipes. This paper aims to study fully developed internal laminar flow through a corrugated cylindrical duct, using the Galerkin-based integral method. As an application, we present a study using heavy oil with a relative density of 0.9648 (14.6 °API) and temperature-dependent viscosities ranging from 1715 to 13000 cP. Results for different fluid dynamics parameters, such as the Fanning friction factor, Reynolds number, shear stress, and pressure gradient, are presented and analyzed based on the corrugation number established for each section and aspect ratio of the pipe.

Entropy Generation Minimization of Confined Nanofluids Laminar Flow Around a Block

2010 ◽  
Author(s):  
Mehdi Boghrati ◽  
Ehsan Ebrahimnia Bajestan ◽  
Vahid Etminan
Keyword(s):  
Heat Transfer ◽  
Pressure Drop ◽  
Laminar Flow ◽  
Entropy Generation ◽  
Control Volume ◽  
Spherical Shape ◽  
Temperature Fields ◽  
Heating Process ◽  
Water Mixture ◽  
Entropy Generation Minimization

According to the importance of cooling and heating process of a solid object, entropy generation in confined flow around a block is studied. In the current study, numerical simulation of laminar flow and heat transfer of nanofluids with nanoparticles of different shapes is considered. The nanofluids are water mixture with either Al2O3 nanoshperes or carbon nanotubes (CNTs). The incompressible Navier-Stokes and energy equations are solved numerically in a body fitted coordinates system using a control volume technique. The flow patterns and temperature fields for different values of the particles concentrations are examined in detail. Furthermore, the effects of nanoparticles shape and concentration on the heat transfer are studied. Furthermore the influences of nanofluids on pressure drop and pump power is examined. On the other hand, the entropy generation minimization is considered as the optimization criterion. The results indicate that in most cases the nanofluids enhance the heat transfer as well as pressure drop. It is interesting to note that the shape of nanoparticles is critical in determining the key mechanism of heat transport in nanofluids. Nanofluids with cylindrical nanoparticles exhibit a greater increase in heat transfer compared with nanofluids having spherical shape nanoparticles.

Entropy Generation Minimization of Fully Developed Internal Convective Flows With Constant Heat Flux

2003 ◽  
Author(s):  
Eric B. Ratts ◽  
Atul G. Raut
Keyword(s):  
Heat Transfer ◽  
Heat Flux ◽  
Reynolds Number ◽  
Laminar Flow ◽  
Turbulent Flow ◽  
Entropy Generation ◽  
Cross Sections ◽  
Constant Heat Flux ◽  
Constant Heat ◽  
Entropy Generation Minimization

This paper addresses the thermodynamic optimum of single-phase convective heat transfer in fully developed flow for uniform and constant heat flux. The optimal Reynolds number is obtained using the entropy generation minimization (EGM) method. Entropy generation due to viscous dissipation and heat transfer dissipation in the flow passage are summed, and then minimized with respect to Reynolds number based on hydraulic diameter. For fixed mass flow rate and fixed total heat transfer rate, and the assumption of uniform heat flux, an optimal Reynolds number for laminar as well as turbulent flow is obtained. In addition, the method quantifies the flow irreversibilities. It was shown that the ratio of heat transfer dissipation to viscous dissipation at minimum entropy generation was 5:1 for laminar flow and 29:9 for turbulent flow. For laminar flow, the study compared non-circular cross-sections to the circular cross-section. The optimal Reynolds number was determined for the following cross-sections: square, equilateral triangle, and rectangle with aspect ratios of two and eight. It was shown that the rectangle with the higher aspect ratio had the smallest optimal Reynolds number, the smallest entropy generation number, and the smallest flow length.

Numerical Investigation of Local Entropy Generation for Laminar Flow in Rotating-Disk Systems

2010 ◽  
Vol 132 (9) ◽  
Author(s):  
Mohammad Shanbghazani ◽  
Vahid Heidarpoor ◽  
Marc A. Rosen ◽  
Iraj Mirzaee
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Laminar Flow ◽  
Entropy Generation ◽  
Generation Rate ◽  
Entropy Generation Rate ◽  
Bejan Number ◽  
Local Entropy ◽  
Fluid Friction ◽  
Local Entropy Generation

The entropy generation is investigated numerically in axisymmetric, steady-state, and incompressible laminar flow in a rotating single free disk. The finite-volume method is used for solving the momentum and energy equations needed for the determination of the entropy generation due to heat transfer and fluid friction. The numerical model is validated by comparing it to previously reported analytical and experimental data for momentum and energy. Results are presented in terms of velocity distribution, temperature, local entropy generation rate, Bejan number, and irreversibility ratio distribution for various rotational Reynolds number and physical cases, using dimensionless parameters. It is demonstrated that increasing rotational Reynolds number increases the local entropy generation rate and irreversibility rate, and that the irreversibility is mainly due to heat transfer while the irreversibility associated with fluid friction is minor.

Comprehensive hydrothermal analysis of an inclined mini-channel with fin array: by dual/multi-relaxation-time LBM and experimental process on SiO2-glycol rheological/thermal characteristics

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Daryoush Kamali ◽  
Saeid Hejri ◽  
Narges Akbar ◽  
Emad Hasani Malekshah
Keyword(s):  
Relaxation Time ◽  
Entropy Generation ◽  
Volume Fraction ◽  
Thermal Characteristics ◽  
Lattice Models ◽  
Temperature Fields ◽  
Bejan Number ◽  
Maximum Enhancement ◽  
Content Type ◽  
Structure Of Flow

Purpose The purpose of this study is to present a comprehensive hydrothermal analysis on an inclined mini-channel using numerical and experimental techniques. The fin array acts as heat source within the channel, and a wavy wall located at the top of the channel is heat sink. The side walls are insulated with curved profiles. Also, the channel is inclined with four known inclination angles. To solve the governing equations, the dual-multi-relaxation-time lattice Boltzmann method with D2Q9 and D2Q5 lattice models for flow and temperature fields is used, respectively. Also, the channel is filled with SiO2-glycol nanofluid. Design/methodology/approach Identifying the behavior of a thermal component during natural convective flow is a challenging topic due to its complexities. This paper focuses on analyzing the thermal and hydrodynamic aspects of a narrow channel equipping with fin array. Findings Two correlations are proposed considering temperature and volume fraction ranges for thermal conductivity and dynamic viscosity according to measured experimental data which are used in the numerical phase. Finally, the structure of flow, temperature distribution of fluid, local thermal and viscous dissipations, volume-averaged entropy production, Bejan number and heat transfer rate are extracted by numerical simulations. The results show that the average Nusselt number enhances about 57% (maximum enhancement percentage) when volume fraction increases from 1% to 3% at Ra = 106 and θ = 90°. In addition, the value of entropy generation is maximum at φ = 1%, Ra = 106 and φ = 90°. Also, the maximum enhancement of entropy generation in range of Ra = 103 to 106 is about 4 times at φ = 1% and θ = 90°. Originality/value The originality of the present study is combining a modern numerical method (i.e. dual/multi-relaxation-time LBM) with experimental observation on characteristics of SiO2-glycol nanofluid to study the thermal and hydrodynamic properties of the studied mini-channel.

Heat transfer and entropy generation analysis of Cu-water nanofluid in a vertical channel

2018 ◽  
Vol 15 (5) ◽  
pp. 604-613
Author(s):  
Essma Belahmadi ◽  
Rachid Bessaih
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Mixed Convection ◽  
Friction Factor ◽  
Entropy Generation ◽  
Volume Fraction ◽  
Solid Volume Fraction ◽  
Vertical Channel ◽  
Simple Algorithm ◽  
Content Type

Purpose The purpose of this study is to analyze heat transfer and entropy generation of a Cu-water nanofluid in a vertical channel. The channel walls are maintained at a hot temperature Tw. An up flow penetrates the channel at a uniform velocity v0 and a cold temperature T0 (T0 < Tw). The effects of Reynolds number Re, Grashof number Gr and solid volume fraction ϕ on streamlines, isotherms, entropy generation, friction factor, local and mean Nusselt numbers are evaluated. Design/methodology/approach The Cu-water nanofluid is used in this study. The software Ansys-fluent 14.5, based on the finite-volume method and SIMPLE algorithm, is used to simulate the mixed convection problem with entropy generation in a vertical channel. Findings The results show that the increase of Reynolds and Grashof numbers and solid volume fraction improves heat transfer and reduces entropy generation. Correlations for the mean Nusselt number and friction factor in terms of Reynolds number and solid volume fraction are obtained. The present results are compared with those found in the literature, which reveal a very good agreement. Originality/value The originality of this work is to understand the heat transfer and entropy generation for mixed convection of a Cu-water nanofluid in a vertical channel.

MHD micropolar nanofluid flow through an inclined channel with entropy generation subjected to radiative heat flux, viscous dissipation and multiple slip effects

2020 ◽  
Vol 16 (6) ◽  
pp. 1475-1496
Author(s):  
A. Roja ◽  
B.J. Gireesha ◽  
B.C. Prasannakumara
Keyword(s):  
Heat Flux ◽  
Viscous Dissipation ◽  
Entropy Generation ◽  
Radiative Heat ◽  
Radiative Heat Flux ◽  
Nanofluid Flow ◽  
Content Type ◽  
Inclined Channel ◽  
Micropolar Nanofluid ◽  
Flow Through

PurposeMiniaturization with high thermal performance and lower cost is one of the advanced developments in industrial science chemical and engineering fields including microheat exchangers, micro mixers, micropumps, cooling microelectro mechanical devices, etc. In addition to this, the minimization of the entropy is the utilization of the energy of thermal devices. Based on this, in the present investigation, micropolar nanofluid flow through an inclined channel under the impacts of viscous dissipation and mixed convection with velocity slip and temperature jump has been numerically studied. Also the influence of magnetism and radiative heat flux is used.Design/methodology/approachThe nonlinear system of ordinary differential equations are obtained by applying suitable dimensionless variables to the governing equations, and then the Runge–Kutta–Felhberg integration scheme is used to find the solution of velocity and temperature. Entropy generation and Bejan number are calculated via using these solutions.FindingsIt is established to notice that the entropy generation can be improved with the aspects of viscous dissipation, magnetism and radiative heat flux. The roles of angle of inclination (α), Eckert number (Ec), Reynolds number (Re), thermal radiation (Rd), material parameter (K),  slip parameter (δ), microinertial parameter (aj), magnetic parameter (M), Grashof number (Gr) and pressure gradient parameter (A) are demonstrated. It is found that the angle of inclination and Grashof number enhances the entropy production while it is diminished with material parameter and magnetic parameter.Originality/valueElectrically conducting micropolar nanofluid flow through an inclined channel subjected to the friction irreversibility with temperature jump and velocity slip under the influence of radiative heat flux has been numerically investigated.

Sign in / Sign up

Export Citation Format

Share Document