Numerical results for the classical free convection flow problem in a square porous cavity using spline functions

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Sanda Micula ◽  
Ioan Pop
Keyword(s):  
Saturated Porous Medium ◽  
Heat Transfer Process ◽  
Numerical Results ◽  
Spline Functions ◽  
Convection Flow ◽  
Content Type ◽  
Nusselt Numbers ◽  
Side Walls ◽  
Convective Cells ◽  
The Mathematical Model

Purpose This paper aims to present the problem of natural convection in a square cavity filled with a fluid-saturated porous medium having constant temperatures on the side walls, and the numerical results are obtained. Design/methodology/approach Dimensionless equations governing the mathematical model together with the boundary conditions are obtained, and the problem is solved by spline functions. Findings The numerical results of streamlines, isotherms and local and average Nusselt numbers are investigated and discussed for different values of the governing parameters. The Rayleigh number is proposed to be control parameter for heat and fluid flow inside the cavity. Originality/value Interesting results with this new numerical method have been obtained, such as the behaviour of the convective cells and the local and average Nusselt number. The obtained results are compared and successfully validated with previous reported results from the open literature. The present numerical results are new and original. The reported results can contribute to other researchers on electing the relevant parameters to optimize the heat transfer process in the modern industry.

Entropy generation optimization for MHD natural convection of a nanofluid in porous media-filled enclosure with active parts and viscous dissipation

2017 ◽  
Vol 27 (2) ◽  
pp. 379-399 ◽  
Author(s):  
M.A. Mansour ◽  
Sameh Elsayed Ahmed ◽  
Ali J. Chamkha
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Viscous Dissipation ◽  
Entropy Generation ◽  
Local Heat Transfer ◽  
Local Heat ◽  
Convection Flow ◽  
Negative Effects ◽  
Content Type ◽  
Volume Method

Purpose This paper aims to investigate the entropy generation due to magnetohydrodynamic natural convection flow and heat transfer in a porous enclosure filled with Cu-water nanofluid in the presence of viscous dissipation effect. The left and right walls of the cavity are thermally insulated. There are heated and cold parts, and these are placed on the bottom and top wall, respectively, whereas the remaining parts are thermally insulated. Design/methodology/approach The finite volume method is used to solve the dimensionless partial differential equations governing the problem. A comparison with previously published woks is presented and is found to be in an excellent agreement. Findings The minimization of entropy generation and local heat transfer according to different values of the governing parameters are presented in details. It is found that the presence of magnetic field has negative effects on the local entropy generation because of heat transfer and the local total entropy generation. Also, the increase in the heated part length leads to a decrease in the local Nusselt number. Originality/value This problem is original, as it has not been considered previously.

Fractional order plasma modeling based on linear polarization of LASER light: an Atangana–Baleanu Caputo approach

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Tamour Zubair ◽  
Muhammad Usman ◽  
Tiao Lu
Keyword(s):  
Fractional Order ◽  
Numerical Algorithm ◽  
Laser Light ◽  
Spectral Estimation ◽  
Initial Perturbation ◽  
Physical Analysis ◽  
Content Type ◽  
Specific Geometry ◽  
The Mathematical Model ◽  
Time Evaluation

PurposeThe purpose of this offered research is to articulate a multifaceted kind of highly unstable initial perturbation and further analyze the performance of the plasma particles for time-fractional order evaluation.Design/methodology/approachFor this purpose, the authors designed specific geometry and further interpreted it into the mathematical model using the concepts of the Vlasov Maxwell system. The suggested algorithm is based on the finite-difference and spectral estimation philosophy. The management of time and memory in generic code for computational purposes is also discussed.FindingsThe main purpose is to analyze the fractional behavior of plasma particles and also the capability of the suggested numerical algorithm. Due to initial perturbations, there are a lot of sudden variations that occurred in the formulated system. Graphical behavior shows that SR parameter produces devastation as compared to others. The variation of fractional parameter between the defend domain demonstrates the hidden pictures of plasma particles. The design scheme is efficient, convergent and has the capability to cover the better physics of the problem.Practical implicationsPlasma material is commonly used in different areas of science. Therefore, in this paper, the authors increase the capability of the mathematical plasma model with specific geometry, and further suitable numerical algorithm is suggested with detailed physical analysis of the outcomes. The authors gave a new direction to study the performance of plasma particles under the influence of LASER light.Originality/valueIn the recent era, science has produced a lot of advancements to study and analyze the physical natural process, which exist everywhere in the real word. On behalf of this current developments, it is now insufficient to study the first-order time evaluation of the plasma particles. One needs to be more precise and should move toward the bottomless state of it, that is, macroscopic and microscopic time-evaluation scales, and it is not wrong to say that there exits a huge gap, to study the time evaluation in this discussed manner. The presented study is entirely an advanced and efficient way to investigate the problem into the new directions. The capability of the proposed algorithm and model with fractional concepts can fascinate the reader to extend to the other dimensions.

Force tracking control of grinding end effector based on backstepping + PID

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Shijie Dai ◽  
Shining Li ◽  
Wenbin Ji ◽  
Zhenlin Sun ◽  
Yufeng Zhao
Keyword(s):  
Mathematical Model ◽  
Linear System ◽  
Control Strategy ◽  
Grinding Force ◽  
Constant Force ◽  
End Effector ◽  
Content Type ◽  
Modeling And Analysis ◽  
The Mathematical Model ◽  
Automobile Wheel

Purpose This study aims to realize the constant force grinding of automobile wheel hub. Design/methodology/approach A force control strategy of backstepping + proportion integration differentiation (PID) is proposed. The grinding end effector is installed on the flange of the robot. The robot controls the position and posture of the grinding end actuator and the grinding end actuator controls the grinding force output. First, the modeling and analysis of the grinding end effector are carried out, and then the backstepping + PID method is adopted to control the grinding end effector to track the expected grinding force. Finally, the feasibility of the proposed method is verified by simulation and experiment. Findings The simulation and experimental results show that the backstepping + PID strategy can track the expected force quickly, and improve the dynamic response performance of the system and the quality of grinding and polishing of automobile wheel hub. Research limitations/implications The mathematical model is based on the pneumatic system and ideal gas, and ignores the influence of friction in the working process of the cylinder, so the mathematical model proposed in this study has certain limitations. A new control strategy is proposed, which is not only used to control the grinding force of automobile wheels, but also promotes the development of industrial control. Social implications The automatic constant force grinding of automobile wheel hub is realized, and the manpower is liberated. Originality/value First, the modeling and analysis of the grinding end effector are carried out, and then the backstepping + PID method is adopted to control the grinding end effector to track the expected grinding force. The nonlinear model of the system is controlled by backstepping method, and in the process, the linear system composed of errors is obtained, and then the linear system is controlled by PID to realize the combination of backstepping and PID control.

An efficient Bi-cubic B-spline ADI method for numerical solutions of two-dimensional unsteady advection diffusion equations

2018 ◽  
Vol 28 (11) ◽  
pp. 2620-2649 ◽  
Author(s):  
Rajni Rohila ◽  
R.C. Mittal
Keyword(s):  
Partial Differential Equations ◽  
Differential Equations ◽  
Numerical Solutions ◽  
Diffusion Equations ◽  
Spline Functions ◽  
Two Dimensional ◽  
Partial Differential ◽  
Content Type ◽  
B Spline ◽  
Advection Diffusion

Purpose This paper aims to develop a novel numerical method based on bi-cubic B-spline functions and alternating direction (ADI) scheme to study numerical solutions of advection diffusion equation. The method captures important properties in the advection of fluids very efficiently. C.P.U. time has been shown to be very less as compared with other numerical schemes. Problems of great practical importance have been simulated through the proposed numerical scheme to test the efficiency and applicability of method. Design/methodology/approach A bi-cubic B-spline ADI method has been proposed to capture many complex properties in the advection of fluids. Findings Bi-cubic B-spline ADI technique to investigate numerical solutions of partial differential equations has been studied. Presented numerical procedure has been applied to important two-dimensional advection diffusion equations. Computed results are efficient and reliable, have been depicted by graphs and several contour forms and confirm the accuracy of the applied technique. Stability analysis has been performed by von Neumann method and the proposed method is shown to satisfy stability criteria unconditionally. In future, the authors aim to extend this study by applying more complex partial differential equations. Though the structure of the method seems to be little complex, the method has the advantage of using small processing time. Consequently, the method may be used to find solutions at higher time levels also. Originality/value ADI technique has never been applied with bi-cubic B-spline functions for numerical solutions of partial differential equations.

Numerical simulation of vapor bubble growth on a vertical superheated wall using lattice Boltzmann method

2015 ◽  
Vol 25 (5) ◽  
pp. 1214-1230 ◽  
Author(s):  
Tao Sun ◽  
Weizhong Li ◽  
Bo Dong
Keyword(s):  
Heat Transfer ◽  
Numerical Simulation ◽  
Phase Change ◽  
Lattice Boltzmann Method ◽  
Lattice Boltzmann ◽  
Nucleate Boiling ◽  
Numerical Results ◽  
Heat Transfer Mechanism ◽  
Content Type ◽  
Boltzmann Method

Purpose – The purpose of this paper is to test the feasibility of lattice Boltzmann method (LBM) for numerical simulation of nucleate boiling and transition boiling. In addition, the processes of nucleate and transition boiling on vertical wall are simulated. The heat transfer mechanism is discussed based on the evolution of temperature field. Design/methodology/approach – In this paper, nucleate boiling and transition boiling are numerically investigated by LBM. A lattice Boltzmann (LB) multiphase model combining with a LB thermal model is used to predict the phase-change process. Findings – Numerical results are in good agreement with existing experimental results. Numerical results confirm the feasibility of the hybrid LBM for direct simulations of nucleate and transition boiling. The data exhibit correct parametric dependencies of bubble departure diameter compared with experimental correlation and relevant references. Research limitations/implications – All the simulations are performed in two-dimensions in this paper. In the future work, the boiling process will be simulated in three-dimensional. Practical implications – This study demonstrated a potential model that can be applied to the investigation of phase change heat transfer, which is one of the effective techniques for enhance the heat transfer in engineering. The numerical results can be considered as a basic work or a reference for generalizing LB method in the practical application about nucleate boiling and transition boiling. Originality/value – The hybrid LBM is first used for simulation of nucleate and transition boiling on vertical surface. Heat transfer mechanism during boiling is discussed based on the numerical results.

Influence of velocity head on filling transients in a branched pipeline

2018 ◽  
Vol 35 (7) ◽  
pp. 2502-2513 ◽  
Author(s):  
Ling Wang ◽  
Fujun Wang ◽  
Bryan William Karney ◽  
Ahmad Malekpour ◽  
Zhengwei Wang
Keyword(s):  
Method Of Characteristics ◽  
Energy Equation ◽  
Transient Flow ◽  
Numerical Results ◽  
Velocity Head ◽  
Piezometric Head ◽  
Content Type ◽  
High Point ◽  
Hydraulic Transient ◽  
Column Separation

Purpose The velocity head is usually neglected in the energy equation for a pipeline junction when one-dimensional (1D) hydraulic transient flow is solved by method of characteristics. The purpose of this paper is to investigate the effect of velocity head on filling transients in a branched pipeline by an energy equation considering velocity head. Design/methodology/approach An interface tracking method is used to locate the air–water interface during pipeline filling. The pressured pipe flow is solved by a method of characteristics. A discrete gas cavity model is included to permit the occurrence of column separation. A universal energy equation is built by considering the velocity head. The numerical method is provisionally verified in a series pipeline and the numerical results and experimental data accord well with each other. Findings The numerical results show that some differences in filling velocity and piezometric head occur in the branched pipeline. These differences arise because the velocity head in the energy equation can become an important contributor to the hydraulic response of the system. It is also confirmed that a local high point in the profile is apt to experience column separation during rapid filling. Significantly, the magnitude of overpressure and cavity volume induced by filling transients at the local high point is predicted to increase with the velocity in the pipes. Originality/value The velocity head in the energy equation for a pipeline junction could play an important role in the prediction of filling velocity, piezometric head and column separation phenomenon, which should be given more attention in 1D hydraulic transient analysis.

Darcy-Forchheimer flow with variable thermal conductivity and Cattaneo-Christov heat flux

2016 ◽  
Vol 26 (8) ◽  
pp. 2355-2369 ◽  
Author(s):  
T. Hayat ◽  
Taseer Muhammad ◽  
Saleh Al-Mezal ◽  
S.J. Liao
Keyword(s):  
Thermal Conductivity ◽  
Temperature Field ◽  
Velocity Field ◽  
Thermal Relaxation ◽  
Heat Transfer Process ◽  
Relaxation Parameter ◽  
Content Type ◽  
Opposite Behavior ◽  
Non Linear System ◽  
Forchheimer Flow

Purpose The objectives of present communication are threefolds. First is to model and analyze the two-dimensional Darcy-Forchheimer flow of Maxwell fluid induced by a stretching surface. Temperature-dependent thermal conductivity is taken into account. Second is to examine the heat transfer process through non-classical flux by Cattaneo-Christov theory. Third is to derive convergent homotopic solutions for velocity and temperature distributions. The paper aims to discuss these issues. Design/methodology/approach The resulting non-linear system is solved through the homotopy analysis method. Findings An increment in Deborah number β causes a reduction in velocity field f′(η) while opposite behavior is observed for temperature field θ(η). Velocity field f′(η) and thickness of momentum boundary layer are decreased when the authors enhance the values of porosity parameter λ while opposite behavior is noticed for temperature profile θ(η). Temperature field θ(η) is inversely proportional to the thermal relaxation parameter γ. The numerical values of temperature gradient at the sheet − θ′(0) are higher for larger values of thermal relaxation parameter γ. Originality/value To the best of author’s knowledge, no such consideration has been given in the literature yet.

scholarly journals Mathematical modeling and harmonic analysis of SISFCL

2017 ◽  
Vol 36 (1) ◽  
pp. 258-270
Author(s):  
Debraj Sarkar ◽  
Debabrata Roy ◽  
Amalendu Bikash Choudhury ◽  
Sotoshi Yamada
Keyword(s):  
Mathematical Modeling ◽  
Mathematical Model ◽  
Harmonic Analysis ◽  
Voltage Drop ◽  
Element Model ◽  
Iron Core ◽  
Content Type ◽  
Hysteresis Characteristic ◽  
The Core ◽  
The Mathematical Model

Purpose A saturated iron core superconducting fault current limiter (SISFCL) has an important role to play in the present-day power system, providing effective protection against electrical faults and thus ensuring an uninterrupted supply of electricity to the consumers. Previous mathematical models developed to describe the SISFCL use a simple flux density-magnetic field intensity curve representing the ferromagnetic core. As the magnetic state of the core affects the efficient working of the device, this paper aims to present a novel approach in the mathematical modeling of the device with the inclusion of hysteresis. Design/methodology/approach The Jiles–Atherton’s hysteresis model is utilized to develop the mathematical model of the limiter. The model is numerically solved using MATLAB. To support the validity of model, finite element model (FEM) with similar specifications was simulated. Findings Response of the limiter based on the developed mathematical model is in close agreement with the FEM simulations. To illustrate the effect of the hysteresis, the responses are compared by using three different hysteresis characteristics. Harmonic analysis is performed and comparison is carried out utilizing fast Fourier transform and continuous wavelet transform. It is observed that the core with narrower hysteresis characteristic not only produces a better current suppression but also creates a higher voltage drop across the DC source. It also injects more harmonics in the system under fault condition. Originality/value Inclusion of hysteresis in the mathematical model presents a more realistic approach in the transient analysis of the device. The paper provides an essential insight into the effect of the core hysteresis characteristic on the device performance.

Sign in / Sign up

Export Citation Format

Share Document