Impact of partial slip on mixed convective flow towards a Riga plate comprising micropolar TiO2-kerosene/water nanoparticles

2019 ◽  
Vol 29 (5) ◽  
pp. 1647-1662 ◽  
Author(s):  
Aurang Zaib ◽  
Rizwan Ul Haq ◽  
Ali J. Chamkha ◽  
Mohammad Mehdi Rashidi
Keyword(s):  
Boundary Layer ◽  
Nusselt Number ◽  
Convective Flow ◽  
Design Methodology ◽  
Volume Fraction ◽  
Partial Slip ◽  
Content Type ◽  
Water Based ◽  
Riga Plate ◽  
Mixed Convective Flow

Purpose The purpose of this paper is to present an inclusive study of the mixed convective flow involving micropolar fluid holding kerosene/water-based TiO2 nanoparticle towards a vertical Riga surface with partial slip. The outcomes are confined for opposing and assisting flows. Design/methodology/approach Similarity equations are acquired and then worked out numerically by the Keller box technique. Findings Impacts of significant parameters on microrotation velocity, temperature distribution, velocity profile together with the Nusselt number and the skin friction are argued with the help of graphs. Two solutions are achieved in opposing flow, while the solution is unique in assisting flow. It is also monitored that the separation of boundary layer delays because of micropolar parameter and accelerates because of volume fraction. Originality/value The authors trust that all these results are new and significant for researchers.

Transient two-dimensional natural convection flow of a nanofluid past an isothermal vertical plate using Buongiorno’s model

2017 ◽  
Vol 27 (1) ◽  
pp. 23-47 ◽  
Author(s):  
Marneni Narahari ◽  
Suresh Kumar Raju Soorapuraju ◽  
Rajashekhar Pendyala ◽  
Ioan Pop
Keyword(s):  
Boundary Layer ◽  
Nusselt Number ◽  
Brownian Motion ◽  
Natural Convection ◽  
Vertical Plate ◽  
Volume Fraction ◽  
Convection Flow ◽  
Nanoparticle Volume Fraction ◽  
Natural Convection Flow ◽  
Content Type

Purpose The purpose of this paper is to present a numerical investigation of the transient two-dimensional natural convective boundary-layer flow of a nanofluid past an isothermal vertical plate by incorporating the effects of Brownian motion and thermophoresis in the mathematical model. Design/methodology/approach The problem is formulated using the Oberbeck–Boussinesq and the standard boundary-layer approximations. The governing coupled non-linear partial differential equations for conservation of mass, momentum, thermal energy and nanoparticle volume fraction have been solved by using an efficient implicit finite-difference scheme of the Crank–Nicolson type, which is stable and convergent. Numerical computations are performed and the results for velocity, temperature and nanoparticle volume fraction are presented in graphs at different values of system parameters such as Brownian motion parameter, thermophoresis parameter, buoyancy ratio parameter, Prandtl number, Lewis number and dimensionless time. The results for local and average skin-friction and Nusselt number are also presented graphically and discussed thoroughly. Findings It is found that the velocity, temperature and nanoparticle volume fraction profiles enhance with respect to time and attain steady-state values as time progresses. The local Nusselt number is found to decrease with increasing thermophoresis parameter, while it increases slightly with increasing Brownian motion parameter. To validate the present numerical results, the steady-state local Nusselt number results for the limiting case of a regular fluid have been compared with the existing well-known results at different Prandtl numbers, and the results are found to be in an excellent agreement. Research limitations/implications The present analysis is limited to the transient laminar natural convection flow of a nanofluid past an isothermal semi-infinite vertical plate in the absence of viscous dissipation and thermal radiation. The unsteady natural convection flow of a nanofluid will be investigated for various physical conditions in a future work. Practical implications Unsteady flow devices offer potential performance improvements as compared with their steady-state counterparts, and the flow fields in the unsteady flow devices are typically transient in nature. The present study provides very useful information for heat transfer engineers to understand the heat transfer enhancement with the nanofluid flows. The present results have immediate relevance in cooling technologies. Originality/value The present research work is relatively original and illustrates the transient nature of the natural convective nanofluid boundary-layer flow in the presence of Brownian motion and thermophoresis.

A numerical investigation of transient MHD free convective flow of a nanofluid over a moving semi-infinite vertical cylinder

2017 ◽  
Vol 34 (5) ◽  
pp. 1393-1412 ◽  
Author(s):  
V. Rajesh ◽  
A.J. Chamkha ◽  
Ch. Sridevi ◽  
A.F. Al-Mudhaf
Keyword(s):  
Magnetic Field ◽  
Boundary Layer ◽  
Nusselt Number ◽  
Volume Fraction ◽  
Vertical Cylinder ◽  
Skin Friction Coefficient ◽  
Free Convective Flow ◽  
Local Skin ◽  
Content Type ◽  
Local Skin Friction

Purpose The purpose of this paper is to study numerically the influence of a magnetic field on the transient free convective boundary layer flow of a nanofluid over a moving semi-infinite vertical cylinder with heat transfer Design/methodology/approach The problem is governed by the coupled non-linear partial differential equations with appropriate boundary conditions. The fluid is a water-based nanofluid containing nanoparticles of copper. The Brinkman model for dynamic viscosity and Maxwell–Garnett model for thermal conductivity are used. The governing boundary layer equations are written according to The Tiwari–Das nanofluid model. A robust, well-tested, implicit finite difference method of Crank–Nicolson type, which is unconditionally stable and convergent, is used to find the numerical solutions of the problem. The velocity and temperature profiles are studied for significant physical parameters such as the magnetic parameter, nanoparticles volume fraction and the thermal Grashof number Gr. The local skin-friction coefficient and the Nusselt number are also analysed and presented graphically. Findings The present computations have shown that an increase in the values of either magnetic parameter M or nanoparticle volume fraction decreases the local skin-friction coefficient, whereas the opposite effect is observed for thermal Grashof number Gr. The local Nusselt number increases with a rise in Gr and ϕ values. But an increase in M reduces the local Nusselt number. Originality/value This paper is relatively original and presents numerical investigation of transient two-dimensional laminar boundary layer free convective flow of a nanofluid over a moving semi-infinite vertical cylinder in the presence of an applied magnetic field. The present study is of immediate application to all those processes which are highly affected by heat enhancement concept and a magnetic field. Further the present study is relevant to nanofluid materials processing, chemical engineering coating operations exploiting nanomaterials and others.

Effect of Nanofluid on Heat Transfer Enhancement for Mixed Convection Flow Over a Corrugated Surface

2020 ◽  
Vol 45 (4) ◽  
pp. 373-383
Author(s):  
Nepal Chandra Roy ◽  
Sadia Siddiqa
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Nusselt Number ◽  
Mixed Convection ◽  
Local Nusselt Number ◽  
Richardson Number ◽  
Thermal Boundary Layer ◽  
Volume Fraction ◽  
Convection Flow ◽  
Mixed Convection Flow

AbstractA mathematical model for mixed convection flow of a nanofluid along a vertical wavy surface has been studied. Numerical results reveal the effects of the volume fraction of nanoparticles, the axial distribution, the Richardson number, and the amplitude/wavelength ratio on the heat transfer of Al2O3-water nanofluid. By increasing the volume fraction of nanoparticles, the local Nusselt number and the thermal boundary layer increases significantly. In case of \mathrm{Ri}=1.0, the inclusion of 2 % and 5 % nanoparticles in the pure fluid augments the local Nusselt number, measured at the axial position 6.0, by 6.6 % and 16.3 % for a flat plate and by 5.9 % and 14.5 %, and 5.4 % and 13.3 % for the wavy surfaces with an amplitude/wavelength ratio of 0.1 and 0.2, respectively. However, when the Richardson number is increased, the local Nusselt number is found to increase but the thermal boundary layer decreases. For small values of the amplitude/wavelength ratio, the two harmonics pattern of the energy field cannot be detected by the local Nusselt number curve, however the isotherms clearly demonstrate this characteristic. The pressure leads to the first harmonic, and the buoyancy, diffusion, and inertia forces produce the second harmonic.

Study of the boundary layer heat transfer of nanofluids over a stretching sheet: Passive control of nanoparticles at the surface

2015 ◽  
Vol 93 (7) ◽  
pp. 725-733 ◽  
Author(s):  
M. Ghalambaz ◽  
E. Izadpanahi ◽  
A. Noghrehabadi ◽  
A. Chamkha
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Boundary Layer ◽  
Nusselt Number ◽  
Heat Transfer Enhancement ◽  
Base Fluid ◽  
Stretching Sheet ◽  
Volume Fraction ◽  
Enhancement Ratio ◽  
Transfer Enhancement

The boundary layer heat and mass transfer of nanofluids over an isothermal stretching sheet is analyzed using a drift-flux model. The relative slip velocity between the nanoparticles and the base fluid is taken into account. The nanoparticles’ volume fractions at the surface of the sheet are considered to be adjusted passively. The thermal conductivity and the dynamic viscosity of the nanofluid are considered as functions of the local volume fraction of the nanoparticles. A non-dimensional parameter, heat transfer enhancement ratio, is introduced, which shows the alteration of the thermal convective coefficient of the nanofluid compared to the base fluid. The governing partial differential equations are reduced into a set of nonlinear ordinary differential equations using appropriate similarity transformations and then solved numerically using the fourth-order Runge–Kutta and Newton–Raphson methods along with the shooting technique. The effects of six non-dimensional parameters, namely, the Prandtl number of the base fluid Prbf, Lewis number Le, Brownian motion parameter Nb, thermophoresis parameter Nt, variable thermal conductivity parameter Nc and the variable viscosity parameter Nv, on the velocity, temperature, and concentration profiles as well as the reduced Nusselt number and the enhancement ratio are investigated. Finally, case studies for Al2O3 and Cu nanoparticles dispersed in water are performed. It is found that increases in the ambient values of the nanoparticles volume fraction cause decreases in both the dimensionless shear stress f″(0) and the reduced Nusselt number Nur. Furthermore, an augmentation of the ambient value of the volume fraction of nanoparticles results in an increase the heat transfer enhancement ratio hnf/hbf. Therefore, using nanoparticles produces heat transfer enhancement from the sheet.

Dual similarity solutions because of mixed convective flow of a double-nanoparticles hybrid nanofluid: critical points and stability analysis

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Ioan Pop ◽  
Mohammadreza Nademi Rostami ◽  
Saeed Dinarvand
Keyword(s):  
Stability Analysis ◽  
Differential Equations ◽  
Flow Regime ◽  
Magnetic Parameter ◽  
Volume Fraction ◽  
Similarity Solutions ◽  
Hybrid Nanofluid ◽  
Content Type ◽  
Buoyancy Parameter ◽  
Mixed Convective Flow

Purpose The purpose of this article is to study the steady laminar magnetohydrodynamics mixed convection stagnation-point flow of an alumina-graphene/water hybrid nanofluid with spherical nanoparticles over a vertical permeable plate with focus on dual similarity solutions. Design/methodology/approach The single-phase hybrid nanofluid modeling is based on nanoparticles and base fluid masses instead of volume fraction of first and second nanoparticles as inputs. After substituting pertinent similarity variables into the basic partial differential equations governing on the problem, the authors obtain a complicated system of nondimensional ordinary differential equations, which has non-unique solution in a certain range of the buoyancy parameter. It is worth mentioning that, the stability analysis of the solutions is also presented and it is shown that always the first solutions are stable and physically realizable. Findings It is proved that the magnetic parameter and the wall permeability parameter widen the range of the buoyancy parameter for which the solution exists; however, the opposite trend is valid for second nanoparticle mass. Besides, mass suction at the surface of the plate as well as magnetic parameter leads to reduce both hydrodynamic and thermal boundary layer thicknesses. Moreover, the assisting flow regime always has higher values of similarity skin friction and Nusselt number relative to opposing flow regime. Originality/value A novel mass-based model of the hybridity in nanofluids has been used to study the foregoing problem with focus on dual similarity solutions. The results of this paper are completely original and, to the best of the authors’ knowledge, the numerical results of the present paper were never published by any researcher.

Algebraic solutions of flow and heat for some nanofluids over deformable and permeable surfaces

2017 ◽  
Vol 27 (10) ◽  
pp. 2259-2267 ◽  
Author(s):  
Mustafa Turkyilmazoglu
Keyword(s):  
Heat Transfer ◽  
Design Methodology ◽  
Temperature Jump ◽  
Volume Fraction ◽  
Velocity Slip ◽  
Jump Conditions ◽  
Content Type ◽  
Layer Flow ◽  
Working Out ◽  
Algebraic Solutions

Purpose This paper aims to working out exact solutions for the boundary layer flow of some nanofluids over porous stretching/shrinking surfaces with different configurations. To serve to this aim, five types of nanoparticles together with the water as base fluid are under consideration, namely, Ag, Cu, CuO, Al2O3 and TiO2. Design/methodology/approach The physical flow is affected by the presence of velocity slip as well as temperature jump conditions. Findings The knowledge on the influences of nanoparticle volume fraction on the practically significant parameters, such as the skin friction and the rate of heat transfer, for the above considered nanofluids, is easy to gain from the extracted explicit formulas. Originality/value Particularly, formulas clearly point that the heat transfer rate is not only dependent on the thermal conductivity of the material but it also highly relies on the heat capacitance as well as the density of the nanofluid under consideration.

scholarly journals Mixed Convective Flow of Micropolar Nanofluid across a Horizontal Cylinder in Saturated Porous Medium

2019 ◽  
Vol 9 (23) ◽  
pp. 5241 ◽  
Author(s):  
Ahmed M. Rashad ◽  
Waqar A. Khan ◽  
Saber M. M. EL-Kabeir ◽  
Amal M. A. EL-Hakiem
Keyword(s):  
Heat Transfer ◽  
Porous Medium ◽  
Convective Flow ◽  
Volume Fraction ◽  
Saturated Porous Medium ◽  
Titania Nanoparticles ◽  
Flow And Heat Transfer ◽  
Micropolar Nanofluid ◽  
Mixed Convective Flow ◽  
The Impact

The micropolar nanofluids are the potential liquids that enhance the thermophysical features and ability of heat transportation instead of base liquids. Alumina and Titania nanoparticles are mixed in a micropolar fluid. The impact of convective boundary condition is also examined with assisting and opposing flows of both nanofluids. The main objective of this study is to investigate mixed convective flow and heat transfer of micropolar nanofluids across a cylinder in a saturated porous medium. Non-similar variables are used to make the governing equations dimensionless. The local similar and non-similar solutions are obtained by using the Runge-Kutta-Fehlberg method of seventh order. The impacts of various embedded variables on the flow and heat transfer of micropolar nanofluids are investigated and interpreted graphically. It is demonstrated that the skin friction and heat transfer rates depend on solid volume fraction of nanoparticles, Biot number, mixed convection, and material parameters.

3D optimization of baffle arrangement in a multi-phase nanofluid natural convection based on numerical simulation

2019 ◽  
Vol 30 (5) ◽  
pp. 2583-2605 ◽  
Author(s):  
Mohammad Mohsen Peiravi ◽  
Javad Alinejad ◽  
D.D. Ganji ◽  
Soroush Maddah
Keyword(s):  
Heat Transfer ◽  
Nusselt Number ◽  
Rayleigh Number ◽  
Heat Transfer Rate ◽  
Transfer Rate ◽  
Volume Fraction ◽  
Target Function ◽  
Optimal Arrangement ◽  
Content Type ◽  
Multi Phase

Purpose The purpose of this study is investigating the effect of using multi-phase nanofluids, Rayleigh number and baffle arrangement simultaneously on the heat transfer rate and Predict the optimal arrangement type of baffles in the differentiation of Rayleigh number in a 3D enclosure. Design/methodology/approach Simulations were performed on the base of the L25 Taguchi orthogonal array, and each test was conducted under different height and baffle arrangement. The multi-phase thermal lattice Boltzmann based on the D3Q19 method was used for modeling fluid flow and temperature fields. Findings Streamlines, isotherms, nanofluid volume fraction distribution and Nusselt number along the wall surface for 104 < Ra < 108 have been demonstrated. Signal-to-noise ratios have been analyzed to predict optimal conditions of maximize and minimize the heat transfer rate. The results show that by choosing the appropriate height and arrangement of the baffles, the average Nusselt number can be changed by more than 57 per cent. Originality/value The value of this paper is surveying three-dimensional and two-phase simulation for nanofluid. Also using the Taguchi method for Predicting the optimal arrangement type of baffles in a multi-part enclosure. Finally statistical analysis of the results by using of two maximum and minimum target Function heat transfer rates.

Finite element analysis of water-based Ferrofluid flow in a partially heated triangular cavity

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Muhammad Usman ◽  
Muhammad Hamid ◽  
Zafar Hayat Khan ◽  
Rizwan Ul Haq ◽  
Waqar Ahmed Khan
Keyword(s):  
Heat Transfer ◽  
Finite Element ◽  
Nusselt Number ◽  
Volume Fraction ◽  
Vertical Wall ◽  
Heating Element ◽  
Dimensionless Temperature ◽  
Dimensionless Numbers ◽  
Element Analysis ◽  
Content Type

Purpose This study aims to deal with the numerical investigation of ferrofluid flow and heat transfer inside a right-angle triangular cavity in the presence of a magnetic field. The vertical wall is partially heated, whereas other walls are kept cold. The effects of thermal radiation are included in the analysis. The governing equations including continuity, momentum and energy equations are converted to nondimensional form using viable variables. Design/methodology/approach Finite element method (FEM)-based simulations are performed using finite element approach to investigate the effects of the volume fraction of ferroparticles (Fe3O4), the length of the heating element and the dimensionless numbers including Rayleigh and Hartmann numbers on the streamlines, isotherms and Nusselt number. Findings It is demonstrated that both horizontal and vertical velocity components increase with the length of the heating element, whereas the dimensionless temperature decreases the heating domain. It is observed that an increase of 10% in the volume fraction of ferroparticles increases Nusselt number more than 12%, and 20% increase in the volume fraction of ferroparticles increases more than 30%, depending upon the length of the heating element. Originality/value This is a new study showing the significance of the magnetic nanoparticles for the enhancement of heat transfer rate in a triangular cavity.

Sign in / Sign up

Export Citation Format

Share Document