A simulation-based multi-objective genetic optimization framework for efficient building design in early stages: application for Vietnam's hot and humid climates

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Thanh Truc Le Gia ◽  
Hoang-Anh Dang ◽  
Van-Binh Dinh ◽  
Minh Quan Tong ◽  
Trung Kien Nguyen ◽  
...  
Keyword(s):  
Energy Consumption ◽  
Residential Building ◽  
Building Design ◽  
Energy Performance ◽  
Genetic Optimization ◽  
Trade Off ◽  
Content Type ◽  
Simulation Based ◽  
Hot And Humid Climates

PurposeIn many countries, innovation in building design for improving energy performance, reducing CO2 emissions and minimizing life cycle cost has received much attention for sustainable development. This paper investigates the importance of optimization tools for enhancing the design performance in the early stages of Vietnam's cooling-dominated buildings in hot and humid climates using an integrated building design approach.Design/methodology/approachThe methodology of this study exploits the non-dominated sorting genetic algorithm (NSGA-II) optimization algorithm coupled with building simulation to research a trade-off between the optimization of investment cost and energy consumption. Our approach focuses on the whole optimization problem of thermal envelope, glazing and energy systems from preliminary design phases. The methodology is then tested for a case study of a non-residential building located in Hanoi.FindingsThe results show a considerable improvement in design performance by our method compared to current building design. The optimal solutions present the trade-off between energy consumption and capital cost in the form of a Pareto front. This helps architects, engineers and investors make important decisions in the early design stages with a large view of impacts of all factors on energy performance and cost.Originality/valueThis is one of the original research to study integrated building design applying the simulation-based genetic optimization algorithm for cooling-dominated buildings in Vietnam. The case study in this article is for a non-residential building in the north of Vietnam but the methodology can also be applied to residential buildings and other regions.

scholarly journals A Study of Design Variables in Daylight and Energy Performance in Residential Buildings under Hot Climates

Energies ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 5836
Author(s):  
Ali Mohammed AL-Dossary ◽  
Daeung Danny Kim
Keyword(s):  
Saudi Arabia ◽  
Energy Consumption ◽  
Residential Buildings ◽  
Residential Building ◽  
Building Design ◽  
Energy Performance ◽  
Total Energy Consumption ◽  
Design Variables ◽  
Slow Progress ◽  
Shading Devices

In Saudi Arabia, residential buildings are one of the major contributors to total energy consumption. Even though there are abundant natural resources, it is somewhat difficult to apply them to building designs, as design variables, due to slow progress and private issues in Saudi Arabia. Thus, the present study demonstrated the development of sustainable residential building design by examining the daylighting and energy performance with design variables. Focusing on the daylighting system, the design variables were chosen, including window-to-wall ratios (WWR), external shading devices, and types of glazing. The illuminance level by these design variables in a building was evaluated by using daylight metrics, such as spatial daylight autonomy and annual sunlight exposure. Moreover, the building energy consumption with these design variables was analyzed by using energy simulation. As a result, the daylighting was improved with the increase in WWRs and the tinted double glazing, while these design options can cause overheating in a residential building. Among types of glazing, the double pane windows with a low-E coating showed better energy performance. Based on the results, it is necessary to find the proper design variables that can balance the daylighting and energy performance in residential buildings in hot climates.

scholarly journals Energy performance diagnosis for the residential building façade in Algeria

2021 ◽  
Author(s):  
Messaouda Rais ◽  
Adel Boumerzoug ◽  
Balint Baranyai
Keyword(s):  
Energy Consumption ◽  
Residential Buildings ◽  
Residential Building ◽  
Building Design ◽  
Energy Performance ◽  
Simulation Software ◽  
Efficient Design ◽  
Design Standards ◽  
Quality Performance ◽  
Performance Diagnosis

AbstractAs it is clear, worldwide buildings are the largest consumer of the final energy consumption. In Algeria, it has been reported that 33% of the overall energy consumption was attributed to buildings. This is due to the design and constructional techniques of the residential buildings, which do not address the local climatic condition. To assess this situation, the study is focused on analyzing the existing residential buildings in Algeria, in terms of energy, thermal, daylight, and indoor air quality performance, using a dynamic simulation software. Typical building design in a hot and dry climate was selected. The results revealed that the existing residential buildings do not comply with the energy-efficient design standards. It was concluded that further strategies should be applied in this sector, in terms of building design, materials, and façade configuration.

Energy analysis for construction of a zero-energy residential building using thermal simulation in Iran

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Nima Amani ◽  
Abdul Amir Reza Soroush ◽  
Mostafa Moghadas Mashhad ◽  
Keyvan Safarzadeh
Keyword(s):  
Renewable Energy ◽  
Energy Consumption ◽  
Energy Analysis ◽  
Residential Building ◽  
Energy Performance ◽  
Thermal Simulation ◽  
Energy Yield ◽  
Zero Energy ◽  
Content Type ◽  
Semi Arid

Purpose The purpose of this paper is to examine the feasibility and design of zero-energy buildings (ZEBs) in cold and semi-arid climates. In this study, to maximize the use of renewable energy, energy consumption is diminished using passive solar architecture systems and techniques. Design/methodology/approach The case study is a residential building with a floor area of 100 m2 and four inhabitants in the cold and semi-arid climate, northeast of Iran. For thermal simulation, the climate data such as air temperature, sunshine hours, wind, precipitation and hourly sunlight, are provided from the meteorological station and weather databases of the region. DesignBuilder software is applied for simulation and dynamic analysis of the building, as well as PVsyst software to design and evaluate renewable energy performance. Findings The simulation results show a 30% decrease in annual energy consumption of the building by complying with the principles of passive design (optimal selection of direction, Trombe wall, shade, proper insulation selection) from 25,443 kWh to 17,767 kWh. Then, the solar energy photovoltaic (PV) system is designed using PVsyst software, taking into account the annual energy requirement and the system’s annual energy yield is estimated to be 26,291 kWh. Originality/value The adaptive comparison of the values obtained from the energy analysis indicated that constructing a ZEB is feasible in cold and semi-arid conditions and is considered an effective step to achieve sustainable and environmentally friendly construction.

scholarly journals Improving energy efficiency in Vietnamese tube houses

2019 ◽  
Vol 8 (5) ◽  
pp. 366-390 ◽  
Author(s):  
Phan Anh Nguyen ◽  
Regina Bokel ◽  
Andy van den Dobbelsteen
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Indoor Environment ◽  
Energy Use ◽  
Housing Stock ◽  
Building Design ◽  
Energy Performance ◽  
Building Envelope ◽  
Content Type ◽  
Actual Energy Consumption

Purpose Refurbishing houses is considered a key measure to improve the energy efficiency of the built environment. However, little is known about the implementation and outcome of housing renovation for energy upgrades in the Vietnamese practice. The purpose of this paper is to investigate the energy performance of the current housing stock in Vietnam and the potential to reduce energy use in households. Design/methodology/approach The paper is based on a survey with 153 respondents in three major climatic regions of Vietnam. The survey focusses on building characteristics, environmental performance, energy performance and refurbishment activities. Data collected from the survey were statistically analysed to give insight into the current performance of the housing stock and its energy saving potential. Findings This paper concludes that building design and construction, particularly the building envelope, have a significant influence on the occupants’ comfort. However, the energy consumption in houses is not statistically associated with building design and indoor environment. It is suggested that financial status and occupants’ behaviour currently have a strong influence on the household energy use. The survey also showed that refurbishment improves the housing performance, especially if improving the indoor environment was one of the drivers. Originality/value There are very few studies on energy use in households in Vietnam, especially with regards to actual energy consumption. This paper brings insights into the actual energy consumption and reveals the “performance gap” in Vietnamese housing stock.

scholarly journals A Sustainable Approach towards the Retrofit of the Public Housing Building Stock: Energy-Architectural Experimental and Numerical Analysis

2021 ◽  
Vol 13 (5) ◽  
pp. 2881
Author(s):  
Federica Rosso ◽  
Arianna Peduzzi ◽  
Lorenzo Diana ◽  
Stefano Cascone ◽  
Carlo Cecere
Keyword(s):  
Energy Consumption ◽  
Agricultural Waste ◽  
Construction Materials ◽  
Residential Building ◽  
Energy Performance ◽  
Extreme Weather Events ◽  
Building Stock ◽  
Existing Building ◽  
The Public

Nowadays, energy retrofit interventions on the existing building stock are of paramount importance towards energy consumption and emissions reductions in the construction sector. Such interventions are also crucial in the view of increasing cities resilience with respect to the intensification of frequent extreme weather events, such as cold spells and heatwaves. Indeed, a wide portion of our cities is dated and lacking with respect to performances. These are the motivations behind the proposed sustainable approach, which deals with the environmental perspective, but also with social and economic ones, by proposing the retrofit of the Public Residential Building stock (Edilizia Residenziale Pubblica, ERP). The objective is to improve the energy performance of ERP stock by means of construction materials coming from local km0 agricultural waste and by-products. The research was conducted by means of in field and numerical analyses of the energy performances of a relevant case study building. Different layers of bio-based, recycled construction materials for the envelope were tested with respect to their efficacy in improving the energy performance of a case study building. The results demonstrate that the most performing envelope solutions and their combination are able to reduce up to 36% of the yearly energy consumption for heating.

A case study to explore the synergy between HBIM and BEM for maintenance of historical buildings

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Ana Carolina Franco De Oliveira ◽  
Cristiano Saad Travassos do Carmo ◽  
Alexandre Santana Cruz ◽  
Renata Gonçalves Faisca
Keyword(s):  
Energy Consumption ◽  
Building Information Modeling ◽  
Energy Performance ◽  
Energy Modeling ◽  
Information Modeling ◽  
Historical Buildings ◽  
Content Type ◽  
Building Information ◽  
Terrestrial Photogrammetry

PurposeIn developing countries, such as Brazil, the construction sector is consistently focused on the construction of new buildings, and there is no dissemination of the preservation, restoration and maintenance of historic buildings. Idle buildings, due to the use and lack of maintenance, present pathological manifestations, such as moisture problems that compromise specially their thermal and energy performance. With this in mind, the purpose of this work is to create a digital model using terrestrial photogrammetry and suggest retrofit interventions based on computer simulation to improve the thermal and energy performance of a historical building.Design/methodology/approachThe proposed methodology combined terrestrial photogrammetry using common smartphones and commercial software for historical buildings with building information modeling (historic building information modeling (HBIM)) and building energy modeling (BEM). The approach follows five steps: planning, site visit, data processing, data modeling and results. Also, as a case study, the School of Architecture and Urbanism of the Fluminense Federal University, built in 1888, was chosen to validate the approach.FindingsA digital map of pathological manifestations in the HBIM model was developed, and interventions considering the application of expanded polystyrene in the envelope to reduce energy consumption were outlined. From the synergy between HBIM and BEM, it was concluded that the information modeled using photogrammetry was fundamental to create the energy model, and simulations were needed to optimize the possible solutions in terms of energy consumption.Originality/valueFirstly, the work proposes a reasonable methodology to be applied in development countries without sophisticated technologies, but with acceptable precision for the study purpose. Secondly, the presented study shows that the use of HBIM for energy modeling proved to be useful to simulate possible solutions that optimize the thermal and energy performance.

Development of a numerical approach to assess the effect of coupled heat and moisture transfer on energy consumption of residential buildings in Moroccan context

2021 ◽  
pp. 174425912110560
Author(s):  
Yassine Chbani Idrissi ◽  
Rafik Belarbi ◽  
Mohammed Yacine Ferroukhi ◽  
M’barek Feddaoui ◽  
Driss Agliz
Keyword(s):  
Energy Consumption ◽  
Building Materials ◽  
Moisture Transfer ◽  
Residential Buildings ◽  
Building Design ◽  
Energy Performance ◽  
Climatic Conditions ◽  
Heat And Moisture Transfer ◽  
Coupled Heat And Moisture ◽  
Heat And Moisture

Hygrothermal properties of building materials, climatic conditions and energy performance are interrelated and have to be considered simultaneously as part of an optimised building design. In this paper, a new approach to evaluate the energy consumption of residential buildings in Morocco is presented. This approach is based on the effect of coupled heat and moisture transfer in typical residential buildings and on their responses to the varied climatic conditions encountered in the country. This approach allows us to evaluate with better accuracy the response of building energy performance and the indoor comfort of building occupants. Annual energy consumption, cooling and heating energy requirements were estimated considering the six climatic zones of Morocco. Based on the results, terms related to coupled heat and moisture transfer can effectively correct the existing energy consumption calculations of the six zones of Morocco, which currently do not consider energy consumption due to coupled heat and moisture transfer.

Recommended angle of a modular dynamic façade in hot-arid climate: daylighting and energy simulation

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Seyedeh Samaneh Golzan ◽  
Mina Pouyanmehr ◽  
Hassan Sadeghi Naeini
Keyword(s):  
Energy Consumption ◽  
Energy Efficient ◽  
Energy Performance ◽  
Arid Climate ◽  
Visual Comfort ◽  
Building Envelopes ◽  
Content Type ◽  
Optimum Angle ◽  
Energy Efficient Buildings ◽  
Hot Arid Climate

PurposeThe modular dynamic façade (MDF) concept could be an approach in a comfort-centric design through proper integration with energy-efficient buildings. This study focuses on obtaining and/or calculating an efficient angle of the MDF, which would lead to the optimum performance in daylight availability and energy consumption in a single south-faced official space located in the hot-arid climate of Yazd, Iran.Design/methodology/approachThe methodology consists of three fundamental parts: (1) based on previous related studies, a diamond-based dynamic skin façade was applied to a south-faced office building in a hot-arid climate; (2) the daylighting and energy performance of the model were simulated annually; and (3) the data obtained from the simulation were compared to reach the optimum angle of the MDF.FindingsThe results showed that when the angle of the MDF openings was set at 30°, it could decrease energy consumption by 41.32% annually, while daylight simulation pointed that the space experienced the minimum possible glare at this angle. Therefore, the angle of 30° was established as the optimum angle, which could be the basis for future investment in responsive building envelopes.Originality/valueThis angular study simultaneously assesses the daylight availability, visual comfort and energy consumption on a MDF in a hot-arid climate.

Sign in / Sign up

Export Citation Format

Share Document