Application of smart electronic systems, firm characteristics and efficient energy consumption – a case of public universities in Uganda

2020 ◽  
Vol 47 (8) ◽  
pp. 1023-1041
Author(s):  
Juliet Isingoma-Wakaisuka ◽  
Charles Kalvin Kikwanga Ibanda ◽  
Ruqqaiya Naluwooza ◽  
Christine Namaganda
Keyword(s):  
Energy Consumption ◽  
Technology Acceptance ◽  
Peer Review ◽  
Public Universities ◽  
Electronic Systems ◽  
Firm Characteristics ◽  
Content Type ◽  
Efficient Energy ◽  
Significant Difference ◽  
Acceptance Model

PurposeThe purpose of the study is to examine the relationship between the application of smart electronic systems, firm characteristics and efficient energy consumption: a case of public universities in Uganda.Design/methodology/approachThe study adopted both quantitative and qualitative approach as well as descriptive cross-sectional survey design tantamounting to an experimental-observation approach. A sample of four public academic universities were explored using primary data. A semi-structured questionnaire together with an evaluation form and a tested experimental kit (from one of the leading electronics centres in Uganda) was used to examine the consumption rates of different electronic appliances of less than 30 Amps. Further, a Pearson product moment correlation (r) analysis was also used to determine the direction of a relationship among the variables together with a linear relationship (regression) to predict a linear association of one or more variables. Recommendations were also given.FindingsSmart electronic systems make a significant determining factor to both firm characteristics (age, number of students, administrative staff and support staff) as well as efficient energy consumption. Nonetheless, there is no significant difference of efficient energy consumption as far as firm characteristics are concerned.Research limitations/implicationsResults support the contributions of the theory of technology and acceptance model by affirming that a number of factors influence the usefulness and ease of use of the smart electronic systems, which in turn influence energy consumption.Practical implicationsUniversities' management should endeavour to install smart electronic systems. But still, government should try to lower taxes on smart electronic systems and genuine agents should be named for easy and affordable access of the users, universities inclusive.Originality/valueThe study contributes towards a theoretical position by affirming the usefulness of technology acceptance model for efficient energy consumption in public universities.Peer reviewThe peer review history for this article is available at: https://publons.com/publon/10.1108/IJSE-02-2019-0083

A consumer satisfaction model based on the integration of EDT and TAM

2017 ◽  
Vol 29 (5) ◽  
pp. 978-993 ◽  
Author(s):  
Yunjin Cho
Keyword(s):  
Technology Acceptance ◽  
Consumer Satisfaction ◽  
Structural Equation ◽  
Measurement Model ◽  
Equation Model ◽  
Content Type ◽  
Multiple Group ◽  
Significant Difference ◽  
The Usa ◽  
Acceptance Model

Purpose The purpose of this paper is to examine the process of consumer satisfaction formation for e-commerce. The study also predicts that the satisfaction formation model of e-commerce will differ between the US and Korean consumers due to differences in cultural background. Design/methodology/approach The study integrates the expectation disconfirmation theory (EDT) and the technology acceptance model (TAM). The hypotheses are examined by analyzing a structural equation model for consumers in the USA and Korea. Findings The results show that the model demonstrates good fit for both groups. For consumers in both countries, when purchasing fashion products on a new e-commerce site, the performance of the site’s usefulness was found to be a crucial variable in their satisfaction and intention to use the site. While there was no significant difference in the multiple group measurement model invariance test, the findings are meaningful because the slight differences in the standard coefficients of the two groups are considered. Originality/value It is meaningful to apply EDT and the TAM to the daily deal site environment. The influence of related variables can be reconfirmed and new consumer behaviors can be better understood. The research provides fresh insights into consumer behavior that can benefit managers when they make decisions in the e-commerce field.

Causes and consequences of unauthorized use of books: readers, authors, and publishers' perspective

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Arūnas Gudinavičius ◽  
Vincas Grigas
Keyword(s):  
Technology Acceptance ◽  
Peer Review ◽  
The Body ◽  
Historical Background ◽  
Content Type ◽  
Face To Face ◽  
Use Of Technology ◽  
Actual Use ◽  
Points Of View ◽  
Acceptance Model

PurposeThe current study aims to identify and explore causes and consequences of unauthorized use of books from readers', publishers', and authors' points of view. The case of Lithuania also assessed, especially historical background (banned alphabet, book smuggling, theft as the social norm in Soviet times) of the country.Design/methodology/approachAiming for more understanding why readers, authors and publishers are using or not using technology for unauthorized access of books, technology acceptance model approach was used, a total of 30 respondents (publishers, authors and readers) were interviewed in semi-structured face-to-face interviews and thematic analysis of collected qualitative data was conducted. Interviews were coded in English with coding software for further analysis.FindingsFindings indicate that the main cause for the unauthorized use of books is a lack of legal e-book titles and acquisition options. This mainly points at publishers, however, instead of using unauthorized sources as opportunities for author promotion or marketing, they rather concentrate on the causes of unauthorized use of books which they are not in control of, including access to unauthorized sources, habits and economic causes. Some publishers believe that the lack of legal e-book titles is the consequence of unauthorized use of book rather than its cause.Originality/valueThis research contributed to the body of knowledge by investigating unauthorized use of books from readers', publishers' and authors' points of view which renders to have a better understanding of the causes and consequences of such behavior, as well as differences between these roles. The authors suggest that these causes lead to the intention to use and actual use of technology which is easier to use and which gives more perceived advantages – technology for unauthorized downloading and reading of books vs legal e-book acquisition options.Peer reviewThe peer review history for this article is available at: https://publons.com/publon/10.1108/OIR-03-2021-0133.

Intention to adopt mobile payment in physical stores

2019 ◽  
Vol 33 (2) ◽  
pp. 285-308 ◽  
Author(s):  
Yonathan Dri Handarkho ◽  
Yulius Harjoseputro
Keyword(s):  
Theoretical Model ◽  
Technology Acceptance ◽  
Switching Behavior ◽  
Mobile Payment ◽  
Herd Behavior ◽  
User Intention ◽  
Consumer Innovativeness ◽  
Content Type ◽  
Use Of Technology ◽  
Acceptance Model

Purpose The purpose of this paper is to develop a theoretical model based on Push–Pull–Mooring (PPM) framework consisting of direct, indirect and moderating effects, derived from technology acceptance model, unified theory of acceptance and use of technology and other extended theory, to address the main factor influencing an individual in adopting mobile payment (MP) in physical stores. The research, therefore, utilized individual switching behavior as an underpinning to explain MP adoption in an offline context. Design/methodology/approach The theoretical model was tested by collecting data from 459 respondents in Indonesia through online self-administered questionnaires. Findings The finding indicated consumer innovativeness has the most influential direct effect on MP adoption, followed by deal proneness, perceived convenience and perceived herd behavior. Meanwhile, perceived enjoyment and subjective norms were found to have an indirect effect on the adaptation of MP through mediator convenience. Furthermore, age, gender, occupation and income did not have any moderating effect for all the direct influence of MP adoption. Originality/value Previous literature only focused on direct intention. However, this study observed the adoption of MP in a physical store by involving the switching behavior. It specifically puts concern and objective as the factors that influence user intention to switch from their old payment system to the MP system in bricks and mortar store using PPM framework.

I want to learn more! Integrating technology acceptance and task–technology fit models for predicting behavioural and future learning intentions

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Alessandro Lo Presti ◽  
Assunta De Rosa ◽  
Enrico Viceconte
Keyword(s):  
Technology Acceptance ◽  
Technology Acceptance Model ◽  
Ease Of Use ◽  
Perceived Ease Of Use ◽  
Content Type ◽  
Moderated Mediation Model ◽  
Task Technology Fit ◽  
Acceptance Model ◽  
Training Opportunities ◽  
Future Learning

Purpose Constant and frequent technological changes within organizations call for further scholarly attention, as behavioural intentions need to be coupled also with future learning intentions to predict the present and prospective individual adaptations and performance. This study, grounded on the technology acceptance model, aims to examine the association between training opportunities and behavioural and future learning intentions also taking into account the role of task–technology fit as a moderator. Design/methodology/approach A survey was carried out within a single organization in the water processing sector on a sample of 200 workers who recently experienced a technological change through the adoption of System Application and Product in data processing. A moderated–mediation model was estimated through regression analyses with bootstrapping. Findings The results were consistent with study hypotheses. In particular, task–technology fit amplified the positive association between perceived ease of use and training opportunities as well as the indirect effect of this latter on both behavioural and future learning intentions through perceived ease of use and perceived usefulness. In sum, the hypothesized moderated–mediation model was confirmed. Originality/value Three novelty factors of this study can be stressed: it is among the few studies carried out on Italian workers in the realm of technology adoption, it expanded the technology acceptance model by including traditional behavioural intentions and future learning intentions as outcome variables and it integrated the task–technology fit perspective within the technology acceptance model.

A new technology acceptance model: a mixed-method of grounded theory and system dynamics

Kybernetes ◽  
2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Mahdi Bastan ◽  
Masoumeh Zarei ◽  
Reza Tavakkoli-Moghaddam ◽  
Hamed Shakouri G.
Keyword(s):  
Grounded Theory ◽  
System Dynamics ◽  
Technology Acceptance ◽  
Conceptual Model ◽  
Technology Acceptance Model ◽  
Holistic Model ◽  
Content Type ◽  
Systemic Model ◽  
Effective Policy ◽  
Acceptance Model

Purpose The Iranian construction industry has been grappling with numerous problems in recent years, including rework, high costs and design errors. Engineers in this field have always highlighted the use of modern technological methods of construction to improve quality and productivity and reduce time and cost. One of these technologies is the so-called building information modeling (BIM), which has been very difficult to adopt and implement in Iran. The purpose of this study is to propose a systemic and holistic model to analyze the dynamics of adoption and implementation of BIM in this country. The purpose of this paper is to understand the dynamics of BIM acceptance to identify the most effective policy to maximize it in the Iranian manufacturing industry. Design/methodology/approach A two-stage methodology has been developed to achieve the purpose of the research. In the first stage, a technology acceptance model for BIM acceptance was developed using the grounded theory (GT) method. This conceptual model provides a holistic basis for building a simulation model. Thus, in the second stage, we used the dynamics system methodology to extract a dynamic model from the conceptual one. This dynamic model can simulate different policies and may be used to evaluate their respective effectiveness. Findings In this study, using the GT method, we obtained 510 primary codes, 118 secondary codes, 50 concepts and 17 categories. After determining the relationships between categories through axial coding, we reached a conceptual model based on selective coding. Mention some of the variables of the conceptual model. Awareness, security, perceived usefulness and perceived ease of use are some of the most important variables of this model. In the next part, this conceptual model was run using system dynamics and, thus, turned into a causal model in which all the effective variables on BIM technology and their relationships with each other are specified. The stock and flow diagram of the problem and its related equations were presented. To improve the model and solve the problem, we examined the four policies as four future scenarios on the model: continuing the status quo, development of specialist workforce training, bolstering governmental support and increasing awareness via advertisement within. The simulation results showed that government support is the most effective policy for maximizing BIM acceptance in Iran. Practical implications In addition to enumerating all the factors affecting BIM technology, this paper proposes a systemic model that provides an accurate and comprehensive view of the acceptance of this technology. In this regard, by introducing feedback loops, as well as reinforcing and balancing factors versus factors causing stasis, the model offers a much deeper insight into mechanisms associated with BIM development and its barriers. Therefore, this study provides a very useful perspective and basis for policy-makers and all stakeholders to accept and implement BIM technology. The findings of this study can lead to more accurate policy-making, removal of acceptance barriers, promotion of incentives, and consequently more effective acceptance of BIM technology. Originality/value In this study, a new mixed research method was used. The innovation of our study lies in its simultaneous use of GT method to construct an accurate and holistic model and applying the system dynamics methodology to build a holistic and systemic model of the BIM acceptance problem. This research also provides a suitable standard and tool for studying BIM technology in developing countries.

The adoption of biometric point-of-sale terminal for payments

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Siti Nurdiyana Atikah Sulaiman ◽  
Mohammad Nabil Almunawar
Keyword(s):  
Technology Acceptance ◽  
Large Scale ◽  
Time Frame ◽  
Ease Of Use ◽  
Perceived Usefulness ◽  
Perceived Ease Of Use ◽  
Content Type ◽  
Point Of Sale ◽  
Scale Point ◽  
Acceptance Model

Purpose The purpose of this paper is to investigate factors that influence customers’ adoption of biometric-based point-of-sale in Brunei. Design/methodology/approach This paper extends technology acceptance model constructs with trust and some other variables as the framework to investigate their influence on the attitude toward the usage of a biometric point-of-sale terminal for payments in Brunei. Nine variables may influence user’s perception toward usage. The nine variables are needed, perceived ease of use, perceived usefulness, experience, innovativeness, privacy, security, trust and attitude toward usage. Multiple regression analysis was conducted to test hypotheses related to these nine variables. Findings It is found that the innovativeness of an individual and similar experience corresponds toward trust, which is positively related to attitude toward usage. Perceived usefulness and trust have significantly influenced the intention of individuals to use biometrics as an authentication method for payment. Research limitations/implications The nature of this research is to gather the public’s opinion and perception as much as it is deemed possible to get a bigger and clearer picture of the study. As the target respondence is citizens and residents of Brunei without any specification or exclusion, a large response would be needed to have a more reliable and accurate result. However, only 205 respondents can be gathered in this study. Had there been a longer time frame, it would be best to gather a lot more responses. Originality/value This paper explores the adoption of biometric authentication in large-scale point-of-terminals. It identifies factors that influence adoption. The results of this study could assist future researchers in which direction to take to further explore biometric as an authentication method for payment. In addition to this, it could also provide banks and financial technology in Brunei a clearer picture of the Brunei market and Bruneians perspective on the biometric system.

Integrating TAM, TPB and TOE frameworks and expanding their characteristic constructs for e-commerce adoption by SMEs

2015 ◽  
Vol 6 (1) ◽  
pp. 76-94 ◽  
Author(s):  
Hart O. Awa ◽  
Ojiabo Ukoha Ojiabo ◽  
Bartholomew Chinweuba Emecheta
Keyword(s):  
Technology Acceptance ◽  
Technology Acceptance Model ◽  
Reasoned Action ◽  
Theoretical Framework ◽  
Future Research ◽  
Content Type ◽  
Perceived Service Quality ◽  
Integrated Framework ◽  
Perceived Trust ◽  
Acceptance Model

Purpose – This paper aims to propose a framework that integrated the technology acceptance model (TAM), theory of planned behaviour (TPB) and technology-organization-environment (TOE) and extended the constructs to enrich literature and capture some peculiarities of small and medium-scale enterprises (SMEs). Individually, the frameworks of extant TAM, TPB and TOE are insightful to the understanding of e-commerce adoption but a bit parochial in their constructs and so, can rarely provide clear lenses to deal with SMEs. Design/methodology/approach – The adoption of e-commerce depends largely on the users’ conscious assessment of the influencing constructs as proposed, among others, in theories of reasoned action, TAM, TPB and TOE. This paper reviewed, synthesized and extended the constructs of these models in an integrated framework. The proposed integrated framework led to 18 propositions to promote and facilitate future research, and to guide explanation and prediction of e-commerce adoption in an organized system. Findings – The introduced constructs in the integrated framework (e.g. company mission, individual difference factors, perceived trust and perceived service quality) introduce socio-technical systems and improve the theoretical base of adoption. Research limitations/implications – Neither the adoption drivers nor the constructs in the theoretical framework are mutually exclusive and exhaustive; rather, they are complementary and could incorporate other factors. Although the theoretical implications of the findings of this paper extend the scope of adoption drivers, the proposed framework needs to be tested empirically. Originality/value – The integrated and extended theoretical framework links three adoption drivers and attempts to improve existing knowledge on e-commerce adoption and to provide bases for more informed decision(s).

Metrics development and modelling the mixed reality and digital twin adoption in the context of Industry 4.0

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Samad M.E. Sepasgozar ◽  
Mohsen Ghobadi ◽  
Sara Shirowzhan ◽  
David J. Edwards ◽  
Elham Delzendeh
Keyword(s):  
Technology Acceptance ◽  
Mixed Reality ◽  
Ease Of Use ◽  
Perceived Usefulness ◽  
Future Research ◽  
Key Factors ◽  
Content Type ◽  
Factors Affecting ◽  
Digital Twin ◽  
Acceptance Model

PurposeThis paper aims to examine the current technology acceptance model (TAM) in the field of mixed reality and digital twin (MRDT) and identify key factors affecting users' intentions to use MRDT. The factors are used as a set of key metrics for proposing a predictive model for virtual, augmented and mixed reality (MR) acceptance by users. This model is called the extended TAM for MRDT adoption in the architecture, engineering, construction and operations (AECO) industry.Design/methodology/approachAn interpretivist philosophical lens was adopted to conduct an inductive systematic and bibliographical analysis of secondary data contained within published journal articles that focused upon MRDT acceptance modelling. The preferred reporting items for systematic reviews and meta-analyses (PRISMA) approach to meta-analysis were adopted to ensure all key investigations were included in the final database set. Quantity indicators such as path coefficients, factor ranking, Cronbach’s alpha (a) and chi-square (b) test, coupled with content analysis, were used for examining the database constructed. The database included journal papers from 2010 to 2020.FindingsThe extant literature revealed that the most commonly used constructs of the MRDT–TAM included: subjective norm; social influence; perceived ease of use (PEOU); perceived security; perceived enjoyment; satisfaction; perceived usefulness (PU); attitude; and behavioural intention (BI). Using these identified constructs, the general extended TAM for MRDT in the AECO industry is developed. Other important factors such as “perceived immersion” could be added to the obtained model.Research limitations/implicationsThe decision to utilise a new technology is difficult and high risk in the construction project context, due to the complexity of MRDT technologies and dynamic construction environment. The outcome of the decision may affect employee performance, project productivity and on-site safety. The extended acceptance model offers a set of factors that assist managers or practitioners in making effective decisions for utilising any type of MRDT technology.Practical implicationsSeveral constraints are apparent due to the limited investigation of MRDT evaluation matrices and empirical studies. For example, the research only covers technologies which have been reported in the literature, relating to virtual reality (VR), augmented reality (AR), MR, DT and sensors, so newer technologies may not be included. Moreover, the review process could span a longer time period and thus embrace a fuller spectrum of technology development in these different areas.Originality/valueThe research provides a theoretical model for measuring and evaluating MRDT acceptance at the individual level in the AECO context and signposts future research related to MRDT adoption in the AECO industry, as well as providing managerial guidance for progressive AECO professionals who seek to expand their use of MRDT in the Fourth Industrial Revolution (4IR). A set of key factors affecting MRDT acceptance is identified which will help innovators to improve their technology to achieve a wider acceptance.

Exploring customers’ attitudes to the adoption of robots in tourism and hospitality

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Mohamed Abou-Shouk ◽  
Hesham Ezzat Gad ◽  
Ayman Abdelhakim
Keyword(s):  
Technology Acceptance ◽  
Technology Acceptance Model ◽  
Structural Equation ◽  
Service Robots ◽  
Content Type ◽  
Factors Affecting ◽  
Positive Attitudes ◽  
Travel Agencies ◽  
Tourism And Hospitality ◽  
Acceptance Model

Purpose This study aims to explore the factors affecting customers’ attitudes to the adoption of robots in hotels and travel agencies. Design/methodology/approach Structural equation modelling was used to test the extended technology acceptance model based on data collected from 570 customers of hotels and travel agencies. Findings The findings revealed that hotel customers have more positive attitudes to service robots than their peers in travel agencies. Originality/value This research contributes to the literature on robots in tourism and responds to the call to investigate customers’ attitudes to the adoption of robots in developing countries.

Construction and empirical research on acceptance model of service robots applied in hotel industry

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Lina Zhong ◽  
Xiaoya Zhang ◽  
Jia Rong ◽  
Hing Kai Chan ◽  
Jinyu Xiao ◽  
...  
Keyword(s):  
Factor Analysis ◽  
Technology Acceptance ◽  
Empirical Research ◽  
Hotel Industry ◽  
Perceived Value ◽  
Service Robots ◽  
Content Type ◽  
Hotel Service ◽  
Acceptance Model ◽  
Robot Selection

PurposeRobots, as the crystallization of new artificial intelligence, are being applied in various fields, especially the hotel industry. They are seizing the opportunities, using technology to improve the overall quality and comprehensive competitiveness. However, they also cause many problems due to practical limitations. The purpose of this paper is to study customers' recognition and acceptance of hotel service robots to guide the successful promotion of this technology.Design/methodology/approachThis paper proposed a comprehensive model based on the theory of planned behavior, the technology acceptance model and then the perceived value-based acceptance model. Exploratory factor analysis, confirmatory factor analysis, grouped regression analysis and path analysis was adopted to validate the impacts of each variable to obtain the final reliable model using data collected from hotel guests using a self-designed questionnaire.FindingsThe empirical research based on the theoretical model shows that the constructed conceptual model can thoroughly explain the influencing factors of hotel robot acceptance, enrich the acceptance theory and provide academic support for the use and popularization of hotel service robots. Among all variables, attitude, usefulness and perceived value are the factors that have the greatest impact on acceptance. They have significant differences in the effects of adjustment variables such as gender, educational level, whether hotel robots have been used, and whether other robot services have been experienced on different paths in the model.Practical implicationsThis paper explored the customer acceptance of service robots in hotels, helped to understand the process of decision-making on service robot selection and contributed to the theoretical extension of the hospitality industry. The work guides hotel management to promote better-personalized products and services of robot technology in the hospitality industries.Originality/valueThe acceptance study on hotel service robots provides insight into the hotel industry to understand customers' attitudes and acceptance of emerging technology.

Sign in / Sign up

Export Citation Format

Share Document