Effect of angular speed of cam on oil film variation in the line contact thermal EHL of a cam-tappet pair

2020 ◽  
Vol 72 (6) ◽  
pp. 713-722
Author(s):  
Hongwei Tang ◽  
Jing Wang ◽  
Nannan Sun ◽  
Jianrong Zhu
Keyword(s):  
Film Thickness ◽  
Peer Review ◽  
Elastohydrodynamic Lubrication ◽  
Grid Method ◽  
Angular Speed ◽  
Content Type ◽  
Sliding Motion ◽  
Oil Characteristics ◽  
Thermal Ehl ◽  
Wedge Effect

Purpose The influence of the cam angular speed on the pressure, film thickness and temperature profiles at some selected angular positions together with the oil characteristics are investigated. Design/methodology/approach A high-order polynomial cam is used, and thermal elastohydrodynamic lubrication (EHL) calculations are carried out by the multi-grid method and line-line scanning technique. Findings It is found that the film thickness decreases with a decrease in angular speed. The depth of the dimple that occurred in the reverse motion is also reduced because of the recession in the “temperature–viscosity wedge” effect. Originality/value It is revealed that the reduction in the cam angular speed makes the classical big surface dimple evolve into a small centralized dimple during the opposite sliding motion. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-08-2019-0327

A thermal EHL investigation for size effect of finite line contact on bush-pin hinge pairs in industrial chains

2020 ◽  
Vol 72 (5) ◽  
pp. 695-701
Author(s):  
Mingyu Zhang ◽  
Jing Wang ◽  
Peiran Yang ◽  
Zhaohua Shang ◽  
Yi Liu ◽  
...  
Keyword(s):  
Film Thickness ◽  
Peer Review ◽  
Contact Zone ◽  
Line Contact ◽  
Equivalent Radius ◽  
Content Type ◽  
Oil Film ◽  
Finite Line Contact ◽  
Finite Line ◽  
Thermal Ehl

Purpose This paper aims to study the influence of the dimension change of bush-pin on the pressure, oil film thickness, temperature rise and traction coefficient in contact zone by using a thermal elastohydrodynamic lubrication (EHL) model for finite line contact. Concretely, the effects of the equivalent curvature radius of the bush and the pin, and the length of the bush are investigated. Design/methodology/approach In this paper, the contact between the bush and pin is simplified as finite line contact. The lubrication state is studied by numerical simulation using steady-state line contact thermal EHL. A constitutive equation Ree–Eyring fluid is used in the calculations. Findings It is found that by selecting an optimal equivalent radius of curvature and prolonging the bush length can improve the lubrication state effectively. Originality/value Under specific working conditions, there exists an optimal equivalent radius to maximize the minimum oil film thickness in the contact zone. The increase of generatrix length will weaken the stress concentration effect in the rounded corner area at both ends of the bush, which can improve the wear resistance of chain. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-10-2019-0448.

Transient thermal elastohydrodynamic lubrication of point contacts subjected to normal vibration

2016 ◽  
Vol 68 (5) ◽  
pp. 536-547
Author(s):  
Jianjun Zhang ◽  
Qibo Ni ◽  
Jing Wang ◽  
Feng Guo
Keyword(s):  
Film Thickness ◽  
Newtonian Fluid ◽  
Normal Vibration ◽  
Numerical Solutions ◽  
Elastohydrodynamic Lubrication ◽  
Vibration Period ◽  
Content Type ◽  
Multi Level ◽  
Vertical Vibrations ◽  
Thermal Ehl

Purpose Vibration exists widely in all machineries working under high speed. The unpredictability of vibration and the change of the relative surface speed may result in difficulties in the elastohydrodynamic lubrication (EHL) analysis. By far, few studies on EHL relating to vibration have been published. The purpose of the present study is to investigate the effect of the vertical vibrations and the influence of temperature on the thermal EHL contacts. Design/methodology/approach The lubricant was assumed to be Newtonian fluid. The time-dependent numerical solutions were achieved instant after instant in each period of the vibration. At each instant, the pressure field was solved with a multi-level technique, the surface deformation was solved with a multi-level multi-integration method and the temperature filed was solved with a finite different scheme through a sweeping progress. The periodic error was checked at each end of the vibration period until the responses of pressure, film thickness and temperature were all periodic functions with the frequency of the roller’s vibrations. Findings The results reveal that normal vibration produces little drastic change of pressure, film thickness and temperature in EHL. Under some conditions, the vibrations of the roller can produce transient dimples within the contact conjunction. It is also showed that the lubrication in the same sliding is better than the opposite sliding. Research limitations/implications For the unpredictability of vibration, it is not easy to do the experiment to realize a real comparison with numerical results. The reach does not show any verification and consider the effect of non-Newtonian fluid. Originality/value The effect of the vertical vibrations on the thermal EHL point contact hast been studied. The effects of both the amplitude and the frequency on the predicted load-carrying capacity, minimum film thickness, center pressure and center temperature and the coefficient of friction were investigated. The role of the thermal effect was given.

Coupling analysis of the fatigue life and the TEHL contact behavior of ball screw under the multidirectional load

2020 ◽  
Vol 72 (10) ◽  
pp. 1285-1293
Author(s):  
Jia-Jia Zhao ◽  
Ming-Xing Lin ◽  
Xian-Chun Song ◽  
Nan Wei
Keyword(s):  
Fatigue Life ◽  
Film Thickness ◽  
Peer Review ◽  
Elastohydrodynamic Lubrication ◽  
Contact Model ◽  
Ball Screw ◽  
Content Type ◽  
Entrainment Velocity ◽  
Contact Points ◽  
Lubrication Performance

Purpose This paper aims to provide thermal elastohydrodynamic lubrication (TEHL) contact model to study all balls’ lubrication performance of the ball screw when the multidirectional load is applied. Design/methodology/approach A new TEHL contact model combining the multidirectional load and the roughness surface texture is established to describe fatigue life of the ball screw. Meanwhile, the authors use the Reynolds equation to study the lubrication performance of the ball screw. Findings When the multidirectional load is applied, contact load, slide-roll ratio and entrainment velocity of all balls have a periodic shape. The TEHL performance values at the ball-screw contact points including contact stress, shear stress, minimum film thickness and temperature rise are higher than that at the ball-nut contact points. The TEHL performance values increase with the increase of root mean square (RMS) except for the film thickness. In addition, the radial load of the ball screw has a significant effect on the fatigue life. Originality/value The results of the studies demonstrate the new TEHL contact model that provides the instructive significance to analyze the fatigue life of the ball screw under the multidirectional load. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-03-2020-0097/

An improved TEHL analysis of textured roller bearings consider various texture parameters and slip

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Junning Li ◽  
Ka Han ◽  
Wuge Chen ◽  
Xiaojie Tang ◽  
Qian Wang
Keyword(s):  
Film Thickness ◽  
Peer Review ◽  
Contact Area ◽  
Surface Texturing ◽  
Elastohydrodynamic Lubrication ◽  
Content Type ◽  
Roller Bearings ◽  
Texture Parameters ◽  
Lubrication Performance ◽  
Texture Size

Purpose The purpose of this study is to reveal the lubrication performance of textured roller bearings under various texture size, texture depth, texture types and slip. Design/methodology/approach In the present study, the improved thermal elastohydrodynamic lubrication method based on the surface texturing of the textured roller bearings is proposed, and then the effect of texture size, texture depth, texture types and slip on the contact pressure, film thickness and temperature distribution are analyzed systematically. Findings The results show that the pressure decreases and the film thickness increases on the contact area because of the surface texturing. The temperature increases first and then decreases as the texture size increases, and then the temperature increases as the texture depth and the slip increases. Compared to circle and square texture, cross texture can obviously decrease the temperature on the contact area. The effectiveness of the proposed method is verified. Originality/value This study can help to reduce friction and wear of textured roller bearings. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-08-2020-0318/

Thermal Elastohydrodynamic Lubrication of an Optimized Cam–Tappet Pair in Smooth Contact

2015 ◽  
Vol 138 (2) ◽  
Author(s):  
W. Wu ◽  
J. Wang ◽  
C. H. Venner
Keyword(s):  
Film Thickness ◽  
Elastohydrodynamic Lubrication ◽  
Temperature Profiles ◽  
Cam Mechanism ◽  
Basic Segment ◽  
Order Polynomial ◽  
Isothermal Analysis ◽  
Base Circle ◽  
Smooth Contact ◽  
Oil Characteristics

A high-order polynomial gas distribution cam mechanism is investigated theoretically from the viewpoint of thermal elastohydrodynamic lubrication (EHL). First, a cam with a larger base circle radius is employed, which results in slide–roll ratio 2.0 < S < 9.0 when the two surfaces move oppositely. The pressure, film thickness, and temperature profiles at a number of angular positions of the cam are presented, together with the isothermal results. The comparison between thermal and isothermal oil characteristics is also shown. It is revealed that the isothermal analysis partly overestimates the actual film thickness and it also misses some essential local phenomena. Second, a cam with a smaller base circle radius is studied, which leads to drastic variations in the slide–roll ratio which encounters four times’ occurrences of infinity in one working period. The pressure, film thickness, and temperature profiles at some angular cam positions together with the oil characteristics are given, showing much dramatic variations. A very small film thickness is observed at the contact of the tappet with the start of the cam basic segment, which suggests a possible risk of direct contact of both surfaces.

Effects of polymers concentration on EHL film-forming in point contacts

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Liangwei Qiu ◽  
Xiaoyang Chen ◽  
Fakai Dong
Keyword(s):  
Film Thickness ◽  
Peer Review ◽  
Point Contact ◽  
High Concentration ◽  
Content Type ◽  
Base Oils ◽  
Low Viscosity ◽  
Lubricant Oil ◽  
Pure Rolling ◽  
Film Forming

Purpose This paper aims to experimentally investigate the film-forming capability of base oils containing poly-methacrylate (PMA) and poly-isobutene (PIB), in a point contact under pure rolling. Design/methodology/approach By using the relative light intensity method, the film thickness is calculated from the interferometer images which are captured by multiple-contact optical elastohydrodynamic lubricated test rig. Findings The test results reveal that polymers, both PMA and PIB, have a significant contribution to the film-forming capability of base oils and the film thickness increases with concentration. The forming-film capabilities for PMA and PIB in base oils are similar at low concentration, while PIB gives a higher film thickness than PMA at high concentration. Shear-thinning phenomenon are observed in all polymer-based oils. Originality/value The polymer usually as an additive is added into the low viscosity base oils to improve the properties of lubricant oil. This paper reports the lubricated properties of PMA and PIB with different concentrations in base oils and to evaluate their functional mechanism in a point contact. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-07-2020-0263/

Size effect on thermal elastohydrodynamic lubrication of industrial chain bush-pin hinge pair

2019 ◽  
Vol 71 (9) ◽  
pp. 1080-1085 ◽  
Author(s):  
Mingyu Zhang ◽  
Jing Wang ◽  
Yi Liu ◽  
Longjie Dai ◽  
Zhaohua Shang
Keyword(s):  
Friction Coefficient ◽  
Film Thickness ◽  
Temperature Rise ◽  
Elastohydrodynamic Lubrication ◽  
Curvature Radius ◽  
Line Contact ◽  
Content Type ◽  
Oil Film ◽  
Industrial Chain ◽  
Infinite Line

Purpose The purpose of this paper is to use elastohydrodynamic lubrication (EHL) theory to study the variation of the equivalent curvature radius “R” on the change of oil film thickness, pressure, temperature rise and friction coefficient in the contact zone between bush-pin in industrial chain drive. Design/methodology/approach In this paper, the contact between bush and pin is simplified as infinitely long line contact. The lubrication state is studied by numerical simulation using steady-state line contact thermal EHL. The two constitutive equations, namely, Newton fluid and Ree–Eyring fluid are used in the calculations. Findings It is found that with the increase of equivalent curvature radius, the thickness of oil film decreases and the temperature rise increases. Under the same condition, the friction coefficient of Newton fluid is higher than that of Ree–Eyring fluid. When the load increases, the oil film thickness decreases, the temperature rise increases and the friction coefficient decreases; and the film thickness increases with the increase of the entraining speed under the condition “R < 1,000 mm”. Research limitations/implications The infinite line contact assumption is only an approximation. For example, the distances between the two inner plates are 5.72 mm, by considering the two parts assembled into the inner plates, the total length of the bush is less than 6 mm. The diameter of the pin and the bore diameter of the bush are 3.28 and 3.33 mm. However, the infinite line contact is also helpful in understanding the general variation of oil film characteristics and provides a reference for the future study of finite line contact of chain problems. Originality/value The change of the equivalent radius R on the variation of the oil film in the contact of the bush and the pin in industrial chain drive was investigated. The size effect influences the lubrication characteristic greatly in the bush-pin pair.

Research on sealing performance of oil seals with micro-dimple texture on lips

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Fuying Zhang ◽  
Yuanhao Zhang
Keyword(s):  
Peer Review ◽  
Surface Texture ◽  
Elastohydrodynamic Lubrication ◽  
Friction Torque ◽  
Pumping Rate ◽  
Content Type ◽  
Rotation Direction ◽  
Sealing Performance ◽  
Pumping Efficiency ◽  
Shaft Seals

Purpose The purpose of this paper is to study the pumping efficiency of oil seals with different surface textures at different speeds, and the influence of the rotation direction of triangular texture on the sealing performance was further analyzed. Design/methodology/approach Based on the theory of elastohydrodynamic lubrication and the pumping mechanism of rotary shaft seals, establishing a numerical model of mixed lubrication in oil seal sealing area. The model is coupled with the lip surface texture parameters and the two-dimensional average Reynolds equation considering the surface roughness. Findings The results show that the application of lip surface texture technology has obvious influence on the oil film thickness, friction torque and pumping rate of oil seal. The triangular texture has the most significant effect on the increase of pump suction rate. When the rotation direction of triangular texture is 315 degrees, the pumping rate of oil seal is the largest compared with the other seven directions. Originality/value The model has a comprehensive theoretical guidance for the design of new oil seal products, which provides a certain basis for the application of surface texture technology in the field of sealing in the future. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-06-2020-0198/

An adjustable oil film thickness test rig for detecting lubrication characteristics of slipper/swash-pair in piston pumps

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Haiji Wang ◽  
Guanglin Shi
Keyword(s):  
Film Thickness ◽  
Peer Review ◽  
Relative Error ◽  
Mathematical Analysis ◽  
Test Rig ◽  
Content Type ◽  
Oil Film ◽  
Displacement Sensors ◽  
Measuring Machine ◽  
Lubrication Characteristics

Purpose The purpose of this paper is to propose an adjustable oil film thickness test rig for detecting lubrication characteristics of the slipper. The mathematical analysis of lubrication is introduced. Based on the results from the test rig, the results comparison from test rig and mathematical analysis is carried out. Design/methodology/approach This paper introduces a mechanism which can adjust the oil film thickness between the slipper and swash-plate. Feasibility is ensured, and the accuracy of test rig is guaranteed by the three-coordinate measuring machine. Three displacement sensors show the oil film thickness and its shape. The reacting force and torque resulting from oil film can be achieved by three S-type force sensors and a torque sensor, respectively. Findings The relative error of the reacting force is small. The relative error reduces and is acceptable when the deformation of retainer is taken into account. The thickness and tilt angle of oil film have less effect on the reacting force. However, they are significantly impact on torque. Originality/value The test rig proposed in this paper is able to adjust the oil film thickness, which is used to detecting the lubrication characteristics in pump design. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-05-2020-0166/

Surface virtual texturing of the journal bearings of a three-cylinder ethanol engine

2020 ◽  
Vol 72 (9) ◽  
pp. 1059-1073
Author(s):  
Gabriel Welfany Rodrigues ◽  
Marco Lucio Bittencourt
Keyword(s):  
Peer Review ◽  
Power Loss ◽  
Mathematical Formulation ◽  
Surface Texturing ◽  
Elastohydrodynamic Lubrication ◽  
Element Model ◽  
Content Type ◽  
Linear Elastic ◽  
Numerical Experimentation ◽  
Coupling Procedure

Purpose This paper aims to numerically investigate the surface texturing effects on the main bearings of a three-cylinder ethanol engine in terms of the power loss and friction coefficient for dynamic load conditions. Design/methodology/approach The mathematical formulation considers the Partir-Cheng modified Reynolds equation. The mass-conserving Elrod-Adams p-θ model with the JFO approach is used to deal with cavitation. A fluid-structure coupling procedure is considered for the elastohydrodynamic lubrication. Accordingly, a 3-D linear-elastic substructured finite element model obtained from Abaqus is applied Findings Simulations were carried out considering different dimple texture designs in terms of location, depth and radius. The results suggested that there are regions where texturing is more effective. In addition, distinct journal rotation speeds are studied and the surface texture was able to reduce friction and the power loss by 7%. Practical implications The surface texturing can be a useful technique to reduce the power loss on the crankshaft bearing increasing the overall engine efficiency. Originality/value The surface texturing performance in a three-cylinder engine using ethanol as fuel was investigated through numerical experimentation. The results are supported by previous findings. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-09-2019-0380/

Sign in / Sign up

Export Citation Format

Share Document