Effects of polymers concentration on EHL film-forming in point contacts

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Liangwei Qiu ◽  
Xiaoyang Chen ◽  
Fakai Dong
Keyword(s):  
Film Thickness ◽  
Peer Review ◽  
Point Contact ◽  
High Concentration ◽  
Content Type ◽  
Base Oils ◽  
Low Viscosity ◽  
Lubricant Oil ◽  
Pure Rolling ◽  
Film Forming

Purpose This paper aims to experimentally investigate the film-forming capability of base oils containing poly-methacrylate (PMA) and poly-isobutene (PIB), in a point contact under pure rolling. Design/methodology/approach By using the relative light intensity method, the film thickness is calculated from the interferometer images which are captured by multiple-contact optical elastohydrodynamic lubricated test rig. Findings The test results reveal that polymers, both PMA and PIB, have a significant contribution to the film-forming capability of base oils and the film thickness increases with concentration. The forming-film capabilities for PMA and PIB in base oils are similar at low concentration, while PIB gives a higher film thickness than PMA at high concentration. Shear-thinning phenomenon are observed in all polymer-based oils. Originality/value The polymer usually as an additive is added into the low viscosity base oils to improve the properties of lubricant oil. This paper reports the lubricated properties of PMA and PIB with different concentrations in base oils and to evaluate their functional mechanism in a point contact. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-07-2020-0263/

A thermal EHL investigation for size effect of finite line contact on bush-pin hinge pairs in industrial chains

2020 ◽  
Vol 72 (5) ◽  
pp. 695-701
Author(s):  
Mingyu Zhang ◽  
Jing Wang ◽  
Peiran Yang ◽  
Zhaohua Shang ◽  
Yi Liu ◽  
...  
Keyword(s):  
Film Thickness ◽  
Peer Review ◽  
Contact Zone ◽  
Line Contact ◽  
Equivalent Radius ◽  
Content Type ◽  
Oil Film ◽  
Finite Line Contact ◽  
Finite Line ◽  
Thermal Ehl

Purpose This paper aims to study the influence of the dimension change of bush-pin on the pressure, oil film thickness, temperature rise and traction coefficient in contact zone by using a thermal elastohydrodynamic lubrication (EHL) model for finite line contact. Concretely, the effects of the equivalent curvature radius of the bush and the pin, and the length of the bush are investigated. Design/methodology/approach In this paper, the contact between the bush and pin is simplified as finite line contact. The lubrication state is studied by numerical simulation using steady-state line contact thermal EHL. A constitutive equation Ree–Eyring fluid is used in the calculations. Findings It is found that by selecting an optimal equivalent radius of curvature and prolonging the bush length can improve the lubrication state effectively. Originality/value Under specific working conditions, there exists an optimal equivalent radius to maximize the minimum oil film thickness in the contact zone. The increase of generatrix length will weaken the stress concentration effect in the rounded corner area at both ends of the bush, which can improve the wear resistance of chain. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-10-2019-0448.

An adjustable oil film thickness test rig for detecting lubrication characteristics of slipper/swash-pair in piston pumps

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Haiji Wang ◽  
Guanglin Shi
Keyword(s):  
Film Thickness ◽  
Peer Review ◽  
Relative Error ◽  
Mathematical Analysis ◽  
Test Rig ◽  
Content Type ◽  
Oil Film ◽  
Displacement Sensors ◽  
Measuring Machine ◽  
Lubrication Characteristics

Purpose The purpose of this paper is to propose an adjustable oil film thickness test rig for detecting lubrication characteristics of the slipper. The mathematical analysis of lubrication is introduced. Based on the results from the test rig, the results comparison from test rig and mathematical analysis is carried out. Design/methodology/approach This paper introduces a mechanism which can adjust the oil film thickness between the slipper and swash-plate. Feasibility is ensured, and the accuracy of test rig is guaranteed by the three-coordinate measuring machine. Three displacement sensors show the oil film thickness and its shape. The reacting force and torque resulting from oil film can be achieved by three S-type force sensors and a torque sensor, respectively. Findings The relative error of the reacting force is small. The relative error reduces and is acceptable when the deformation of retainer is taken into account. The thickness and tilt angle of oil film have less effect on the reacting force. However, they are significantly impact on torque. Originality/value The test rig proposed in this paper is able to adjust the oil film thickness, which is used to detecting the lubrication characteristics in pump design. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-05-2020-0166/

scholarly journals Tribological behavior of oils additised with a phosphonium-derived ionic liquid compared to a commercial oil

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Marlene Bartolomé Sáez ◽  
Antolin E. Hernández Battez ◽  
Jorge Espina Casado ◽  
José L. Viesca Rodríguez ◽  
Alfonso Fernández-González ◽  
...  
Keyword(s):  
Ionic Liquid ◽  
Peer Review ◽  
Formation Rate ◽  
Antiwear Additives ◽  
Stribeck Curve ◽  
Content Type ◽  
Base Oil ◽  
Base Oils ◽  
Antiwear Properties ◽  
Commercial Oil

Purpose The purpose of this paper is to study the antifriction, antiwear and tribolayer formation properties of the trihexyltetradecylphosphonium bis(2,4,4-trimethylpentyl) phosphinate ionic liquid (IL) as additive at 1 wt.% in two base oils and their mixtures, comparing the results with those of a commercial oil. Design/methodology/approach The mixture of the base oils used in the formulation of the commercial oil SAE 0W20 plus the IL was tested under rolling/sliding and reciprocating conditions to determine the so-called Stribeck curve, the tribolayer formation and the antifriction and antiwear behaviors. Findings The use of this IL as additive in these oils does not change their viscosity; improves the antifriction and antiwear properties of the base oils, making equal or outperforming these properties of the SAE 0W20; and the thickness and formation rate of the tribolayer resulting from the IL-surface interaction is highly dependent on the type of base oil and influence on the friction and wear results. Originality/value The use of this IL allows to replace partial or totally commercial antifriction and antiwear additives. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-05-2020-0179/

Solution of the Non-Newtonian Elastohydrodynamic Problem for Circular Contacts Based on a Flow Continuity Method

1996 ◽  
Vol 210 (4) ◽  
pp. 247-258 ◽  
Author(s):  
C A Holt ◽  
H P Evans ◽  
R W Snidle
Keyword(s):  
Film Thickness ◽  
Numerical Solution ◽  
Control Volume ◽  
Point Contact ◽  
Elastohydrodynamic Lubrication ◽  
Theoretical Formulation ◽  
New Approach ◽  
Limiting Shear Stress ◽  
Pure Rolling ◽  
Stress Behaviour

The paper describes a numerical solution method for the point contact elastohydrodynamic lubrication (EHL) problem under non-Newtonian, isothermal conditions. The theoretical formulation of the non-Newtonian effect is general and may be applied to both shear thinning and limiting shear stress behaviour. The particular rheological model investigated in this work is the Eyring ‘sinh law’ relation. The numerical solution of the lubrication equations is based upon a control volume approach rather than the more usual methods that utilize a modified Reynolds equation. This new approach ensures that flow continuity is satisfied at the discretization level. Results are presented to show the effect of non-Newtonian behaviour on film thickness and pressure distribution in circular EHL contacts operating over a range of slide-roll ratios from 0 (pure rolling) to 1.5. Under conditions of pure rolling or low sliding there is found to be little effect of non-Newtonian behaviour, but at the highest degree of sliding the film thickness over the central, flattened area of the contact is reduced by up to 10 per cent at the highest rolling speed of 0.75 m/s.

Effect of changing geometrical characteristics for different shapes of a single ridge passing through elastohydrodynamic of point contacts

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Mohamed Abd Alsamieh
Keyword(s):  
Film Thickness ◽  
Pressure Distribution ◽  
Reynolds Equation ◽  
Point Contact ◽  
Elastohydrodynamic Lubrication ◽  
Point Contacts ◽  
Time Step ◽  
Content Type ◽  
Geometrical Characteristics ◽  
Different Shapes

Purpose The purpose of this paper is to study the behavior of a single ridge passing through elastohydrodynamic lubrication of point contacts problem for different ridge shapes and sizes, including flat-top, triangular and cosine wave pattern to get an optimal ridge profile. Design/methodology/approach The time-dependent Reynolds’ equation is solved using Newton–Raphson technique. Several shapes of surface feature are simulated and the film thickness and pressure distribution are obtained at every time step by simultaneous solution of the Reynolds’ equation and film thickness equation, including elastic deformation. Film thickness and pressure distribution are chosen to be the criteria in the comparisons. Findings The geometrical characteristics of the ridge play an important role in the formation of lubricant film thickness profile and the pressure distribution through the contact zone. To minimize wear, friction and fatigue life, an optimal ridge profile should have smooth shape with small ridge size. Obtained results are compared with other published numerical results and show a good agreement. Originality/value The study evaluates the performance of different surface features of a single ridge with different shapes and sizes passing through elastohydrodynamic of point contact problem in relation to film thickness and pressure profile.

On Three-Dimensional Flat-Top Defects Passing Through an EHL Point Contact: A Comparison of Modeling with Experiments

2005 ◽  
Vol 127 (1) ◽  
pp. 51-60 ◽  
Author(s):  
A. Fe´lix-Quin˜onez ◽  
P. Ehret ◽  
J. L. Summers
Keyword(s):  
High Pressure ◽  
Film Thickness ◽  
Three Dimensional ◽  
Point Contact ◽  
Numerical Results ◽  
Shaped Surface ◽  
Pure Rolling ◽  
Pressure Region ◽  
Inlet Zone ◽  
High Pressure Region

A direct comparison between experimental and numerical results for the passage of an array of 3D flat-top, square shaped surface features through an EHL point contact is presented. Results for pure rolling conditions show that the features’ deformation in the high-pressure region is governed by their ability to entrap lubricant both underneath and in the grooves during their passage through the inlet zone. Film perturbations associated with each defect occur as locally enhanced regions of lubricant and film thickness micro-constrictions. Under sliding conditions the features sustain further deformations as they traverse the high-pressure conjunction and meet the highly viscous lubricant entrapped in the grooves, which moves at a different velocity. Lubricant is also seen to accumulate just in front or behind the features depending on the slide-to-roll ratio. Overall, the results highlight the importance of understanding the effects of the defects structure and the lubricant rheology on the film thickness to unravel the effects of real roughness patterns.

A Quantitative Solution for the Full Shear-Thinning EHL Point Contact Problem Including Traction

2007 ◽  
Author(s):  
Yuchuan Liu ◽  
Q. Jane Wang ◽  
Scott Bair ◽  
Philippe Vergne
Keyword(s):  
Film Thickness ◽  
Point Contact ◽  
Elastohydrodynamic Lubrication ◽  
Shear Thinning ◽  
High Viscosity ◽  
Viscosity Models ◽  
Pure Rolling ◽  
Volume Viscosity ◽  
Traction Coefficient ◽  
Simulation And Experiment

We present a realistic elastohydrodynamic lubrication (EHL) simulation in point contact using a Carreau-like model for the shear-thinning response and the Doolittle-Tait free-volume viscosity model for the piezoviscous response. The liquid is a high viscosity polyalphaolefin which possesses a relatively low threshold for shear-thinning. As a result, the measured EHL film thickness is about one-half of the Newtonian prediction. We derived and numerically solved the two-dimensional generalized Reynolds equation for the modified Carreau model based on Greenwood [1]. Departing from many previous solutions, the viscosity models used for the pressure and shear dependence were obtained entirely from viscometer measurements. Truly remarkable agreement is found in the comparisons of simulation and experiment for traction coefficient and for film thickness in both pure rolling and sliding cases. This agreement validates the use of a generalized Newtonian model in EHL.

The Shear-Thinning Elastohydrodynamic Film Thickness of a Two-Component Mixture

2008 ◽  
Vol 130 (2) ◽  
Author(s):  
Yuchuan Liu ◽  
Q. Jane Wang ◽  
Ivan Krupka ◽  
Martin Hartl ◽  
Scott Bair
Keyword(s):  
Film Thickness ◽  
Ambient Pressure ◽  
Point Contact ◽  
Elastohydrodynamic Lubrication ◽  
Shear Thinning ◽  
Component Mixture ◽  
Base Oil ◽  
Viscosity Models ◽  
Viscosity Behavior ◽  
Pure Rolling

Lubricant base oils are often blends of different molecular weight cuts to arrive at a specified ambient pressure viscosity and, to improve the temperature-viscosity behavior or to simply increase the viscosity, viscosity-modifying polymer additives are often added to the base oil. This paper investigates the effect of mixture rheology on elastohydrodynamic lubrication (EHL) film thickness using EHL contact measurements and a full numerical analysis for three synthetic lubricants including two single-component lubricants PAO650 and PAO100 and a mixture of these. The pressure and shear dependences of the viscosity of these lubricants were measured with high-pressure viscometers; viscosities were not adjusted to fit experiment. The point contact film thicknesses for these lubricants in pure rolling were measured using a thin-film colorimetric interferometry apparatus. Numerical simulations based on the measured rheology show very good agreement with the measurements of film thickness while the Newtonian prediction is up to twice the measurement. These results validate the use of realistic shear-thinning and pressure-viscosity models, which originate from viscosity measurements. It is conceivable that simulation may provide a means to “engineer” lubricants with the optimum balance of film thickness and friction through intelligent mixing of components.

On the characteristics of gas foil conical bearings considering misalignment

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Hongyang Hu ◽  
Ming Feng ◽  
Tianming Ren
Keyword(s):  
Film Thickness ◽  
Peer Review ◽  
Load Capacity ◽  
Dynamic Performance ◽  
Critical Role ◽  
Friction Torque ◽  
Misalignment Angle ◽  
Content Type ◽  
Stiffness Model ◽  
Dynamic Performances

Purpose The purpose of this paper is to study the characteristics of gas foil conical bearings (GFCBs) considering the misalignment, the static and dynamic performances with different misalignment cases were studied. Design/methodology/approach A test rig on the air compressor supported by GFCBs has been developed to measure the practicability. A nonlinear bump stiffness model and one-dimensional beam top foil stiffness model were used as a basis for the calculation of static and dynamic performance. The finite element method and finite difference method are adopted to solve the Reynolds equation and the film thickness equation coupled, in which different misalignment cases were considered by changing the film thickness. Findings The supporting performance of GFCB is excellent, and the film clearance plays a critical role. The misalignment effects depend on the assembled angle and the misalignment angle. The load capacity, friction torque, temperature of GFCB decrease when the misalignment assembled angle is between 120° and 240°, while the dynamic bearing stability is improved. The static and dynamic performances show the opposite law for the other assembled angles, and the misalignment effect is more dramatic when there is a larger misalignment angle. Moreover, the bearing and running parameters largely affect the bearing performance. Originality/value The present study focuses on the static and dynamic characteristics of GFCB and investigates the effects of misalignment on the bearing performance. Peer review The peer review history for this article is available at: https://publons.com/publon/10.1108/ILT-04-2020-0117

The Viscosity of Polyalphaolefins Mixtures at High Pressure and Stress

2018 ◽  
Vol 141 (2) ◽  
Author(s):  
Scott Bair ◽  
Samuel Flores-Torres
Keyword(s):  
High Pressure ◽  
Shear Stress ◽  
Film Thickness ◽  
Shear Viscosity ◽  
Mixing Rule ◽  
Base Oils ◽  
Film Forming ◽  
Low Shear Viscosity ◽  
Temperature And Pressure ◽  
Low Shear

Understanding the pressure and shear dependence of viscosity is essential to an understanding of the mechanisms of film forming and friction in concentrated contacts. The blending of different molecular mass polyalphaolefins (PAOs) may permit the formulator to arrive at a desired combination of film thickness and friction. The viscosities of PAO base oils and their blends were measured versus temperature, pressure, and shear stress to 1 GPa in pressure. The Grunberg–Nissan mixing rule, with effective mole fractions, provides an excellent mixing rule for the temperature and pressure-dependent low-shear viscosity. This work provides the first look at a possible mixing rule for the non-Newtonian response of mixtures of base oils.

Sign in / Sign up

Export Citation Format

Share Document