Selection of the cross-section design for the LHC main dipole

In the paper there is the developed methodology for selecting the installation places and number of sectionalizing units which allows solving the problem according to the criterion of providing the necessary sensitivity of the protective devices installed on the line input. The obtained expression allows calculating the maximum distance to the installation place of a sectionalizing unit. It also allows determining the need to install a sectionalizing unit in a power line. If a sectionalizing unit is installed to protect an outgoing line, the technique can also be used taking into account the adjustment of the original calculated data. The developed methodology for determining the installation place of a sectionalizing unit can be used for other purposes. For example, it allows selecting the cross section of power lines in terms of the protection sensitivity when designing power lines or when reconstructing them.

Download Full-text

Discussion of “Selection of the Cross Section for a Composite T-Beams”

Journal of the Structural Division ◽

10.1061/jsdeag.0000197 ◽

1958 ◽

Vol 84 (1) ◽

Author(s):

A. Zaslavsky

Keyword(s):

Cross Section ◽

The Cross ◽

Selection Of

Download Full-text

Operational problems of 2+1 bypass road sections

Archives of Transport ◽

10.5604/08669546.1218797 ◽

2016 ◽

Vol 38 (2) ◽

pp. 79-89 ◽

Cited By ~ 1

Author(s):

Marian Tracz ◽

Mariusz Kieć

Keyword(s):

Cross Section ◽

Road Safety ◽

Final Part ◽

Traffic Performance ◽

Operation Stage ◽

Trunk Road ◽

The Cross ◽

Traffic Operation ◽

Selection Of

The paper presents several problems of designing trunk-road bypasses of towns, which can be very helpful in improving their traffic performance. Such roads perform supplementary functions to the operation of network of motorways and express-roads constructed in Poland over the last decade. These problems include: selection of the cross section, selection and design of intersections and interchanges on bypasses, safety and traffic operation problems. The authors highlight the advantages of bypasses and point out some errors, which can be seen in the operation stage, basing on research and observation of 8 bypasses. In the paper traffic operation and road safety analyses for Zyrardow bypass are presented. The final part of the paper gives conclusions and recommendations for 2+1 bypass use and design.

Download Full-text

INFLUENCE OF WARM ROLLING AND RECRYSTALLIZATION ANNEALING ON MECHANICAL AND METALLOGRAPHIC PROPERTIES OF THE SUPERALLOY N07080

International Journal of Advanced Research ◽

10.21474/ijar01/13594 ◽

2021 ◽

Vol 9 (10) ◽

pp. 680-689

Author(s):

Omer Beganovic ◽

◽

Belma Fakic ◽

Branka Muminovic ◽

◽

...

Keyword(s):

Grain Size ◽

Cross Section ◽

Warm Rolling ◽

Recrystallization Temperature ◽

Recrystallization Annealing ◽

Warm Deformation ◽

Partial Recrystallization ◽

The Cross ◽

Selection Of

Additional strengthening of superalloy N07080 described in this work was achieved by warm rolling. Control of the ratio of strength and ductile properties of the superalloy is possible by appropriate selection of the amount of warm deformation and the appropriate selection of the partial recrystallization temperature. In addition, recrystallization annealing makes it possible to equalize the grain size across the cross section of the warm rolled bars, which before recrystallization differ significantly in size in the central and peripheral parts of the bars.

Download Full-text

Impact of Road Cuts in Slope Stability in Hilly Regions of Nepal

Journal of Advanced College of Engineering and Management ◽

10.3126/jacem.v6i0.38289 ◽

2021 ◽

Vol 6 ◽

pp. 43-55

Author(s):

Jagat Kumar Shrestha

Keyword(s):

Slope Stability ◽

Cross Section ◽

Design Parameter ◽

Road Construction ◽

Slope Failures ◽

Rural Roads ◽

Rural Road ◽

Section Design ◽

The Impact ◽

Selection Of

This paper reviews the geological and engineering aspects of rural road construction in the hilly areas of Nepal. The general background in geological, climatic and geographical setting is briefly presented in reference to the five-zone Himalayan model for the Nepal Himalayas. Then, alignment selection of rural roads is discussed in the context of the five zone mountain model. The impact of road cross section design and construction on mountain slopes has been studied. The cut width is a key geometric design parameter that has a significant impact on slope stability and volume of excavation. The choice of cut width in cross-section is reviewed and appropriate cut width in cross-section is recommended in terrain slopes to minimize slope failures and volume of excavation.

Download Full-text

Selection of the Cross Section for a Composite T-Beam

Journal of the Structural Division ◽

10.1061/jsdeag.0000135 ◽

1957 ◽

Vol 83 (4) ◽

Author(s):

R. S. Fountain ◽

I. M. Viest

Keyword(s):

Cross Section ◽

The Cross ◽

T Beam ◽

Selection Of

Download Full-text

A New Approach to the Demonstration of Oxidase-Localization Using Tannic Acid Or Catechin

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100073933 ◽

1973 ◽

Vol 31 ◽

pp. 698-699

Author(s):

V. Mizuhira ◽

Y. Futaesaku

Keyword(s):

Cross Section ◽

Tannic Acid ◽

Elastic Fiber ◽

The Other ◽

New Approach ◽

Tissue Block ◽

Active Reaction ◽

The Cross

Previously we reported that tannic acid is a very effective fixative for proteins including polypeptides. Especially, in the cross section of microtubules, thirteen submits in A-tubule and eleven in B-tubule could be observed very clearly. An elastic fiber could be demonstrated very clearly, as an electron opaque, homogeneous fiber. However, tannic acid did not penetrate into the deep portion of the tissue-block. So we tried Catechin. This shows almost the same chemical natures as that of proteins, as tannic acid. Moreover, we thought that catechin should have two active-reaction sites, one is phenol,and the other is catechole. Catechole site should react with osmium, to make Os- black. Phenol-site should react with peroxidase existing perhydroxide.

Download Full-text

Energy Distribution in Electron Beams

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100096096 ◽

1972 ◽

Vol 30 ◽

pp. 568-569

Author(s):

Tamotsu Ohno

Keyword(s):

Electron Beam ◽

Energy Distribution ◽

Cross Section ◽

Integral Curve ◽

Electron Beams ◽

Electron Gun ◽

Angular Divergence ◽

Apparent Increase ◽

Integral Width ◽

The Cross

The energy distribution in an electron; beam from an electron gun provided with a biased Wehnelt cylinder was measured by a retarding potential analyser. All the measurements were carried out with a beam of small angular divergence (<3xl0-4 rad) to eliminate the apparent increase of energy width as pointed out by Ichinokawa.The cross section of the beam from a gun with a tungsten hairpin cathode varies as shown in Fig.1a with the bias voltage Vg. The central part of the beam was analysed. An example of the integral curve as well as the energy spectrum is shown in Fig.2. The integral width of the spectrum ΔEi varies with Vg as shown in Fig.1b The width ΔEi is smaller than the Maxwellian width near the cut-off. As |Vg| is decreased, ΔEi increases beyond the Maxwellian width, reaches a maximum and then decreases. Note that the cross section of the beam enlarges with decreasing |Vg|.

Download Full-text