Design of Continuous Hydrogenation Control System Based on WinCC Configuration Software

2019 ◽  
Author(s):  
Zhang Wei ◽  
Ma Tao
Keyword(s):  
Control System ◽  
Configuration Software ◽  
Continuous Hydrogenation ◽  
Hydrogenation Control

Design of Airfield Lighting Monitor and Control System Based on Hybrid Network

2011 ◽  
Vol 467-469 ◽  
pp. 331-334
Author(s):  
Chang You Wang ◽  
Xiao Feng Yao
Keyword(s):  
Control System ◽  
Light Level ◽  
Configuration Software ◽  
Hybrid Network ◽  
Lighting System ◽  
Visual Aids ◽  
Lighting Control ◽  
Overall Design ◽  
Low Visibility ◽  
And Control

Airfield lighting system is necessary visual aids to ensure the normal movements of aircraft at night or under low visibility conditions. A hybrid network monitoring system based on CAN bus and Ethernet was introduced in the paper according to the actuality of national airfield lighting control system. The AC chop voltage regulating technology was adopted to adjust light level in the Dimmer what is the core of the system, configuration software, hybrid network technology were used to realize the remote monitoring, overall design scheme, the choice of hardware and software platform, and the realization method of network communication were gave out in the paper. Experimental results show that system performance is superior, and be worth promoting.

scholarly journals Application of Configuration Software in Process Control Course Teaching

2016 ◽  
Vol 11 (07) ◽  
pp. 74
Author(s):  
Chunguo Fei ◽  
Chunxin Li
Keyword(s):  
Control System ◽  
Process Control ◽  
Teaching Practice ◽  
Process Control System ◽  
Configuration Software ◽  
Control Configuration ◽  
Learning Interest ◽  
The Mathematical Model ◽  
Simulation Practice ◽  
Controlled Object

According to the characteristics of configuration software and process control course, the configuration software is applied to teaching practice of process control. Configuration software can realize the mathematical model and the design of the digital controller of the controlled object in the process control, and can build different process control system. In the teaching practice of process control, the combination of theory and simulation practice not only makes the boring process control theory more vivid and helps students to understand and remember the theoretical knowledge easily, but also improves the students’ learning interest, efficiency and enthusiasm. Practices prove that this method is an effective way to teach process control system. And it also provides a new idea for such kind of control courses.

Design and Implementation of Heat Exchange Station Control System

2012 ◽  
Vol 170-173 ◽  
pp. 2666-2669 ◽  
Author(s):  
Huan Zhang ◽  
Shu Qi Shang ◽  
Ran Bing Yang
Keyword(s):  
Control System ◽  
Heat Exchange ◽  
Pressure Control ◽  
Steam Pressure ◽  
Configuration Software ◽  
Main Process ◽  
Pid Algorithm ◽  
Design And Implementation ◽  
Level Of Automation ◽  
Station Control System

This paper introduced a design and implementation of heat exchange station control system based on PLC and industrial configuration software, including the control scheme and principle, hardware selection and software design, etc. The circulating pumps and replenishing pumps in the system can all be driven automatically by PLC and inverter. Main process parameters e.g. steam pressure and measurement temperature can all be shown on the industrial PC running configuration software, and instructions could be sent by the engineer and operator on-the-spot via the Human Machine Interface as well. The automatic pressures adjustment of steam supply of the heater by advanced PID algorithm has been realized finally. It is verified that the system is highly reliable and stable, and it greatly enhances the level of automation and pressure control accuracy of the heat exchange station and meets all the equipments running demands well.

Design of Control and Monitor System of Foam Cement Mixing Device Based on PLC and MCGS

2013 ◽  
Vol 756-759 ◽  
pp. 261-264
Author(s):  
C.G. Wang ◽  
Q.H. Sun ◽  
Z.M. Wang ◽  
Y.J. Qi
Keyword(s):  
Control System ◽  
Data Collection ◽  
Data Processing ◽  
Automatic Control ◽  
Configuration Software ◽  
Dynamic Monitoring ◽  
Monitor System ◽  
System Configuration ◽  
Monitoring Data Processing ◽  
And Control

Control and monitor system of foamed cement mixing device are designed based on PLC and MCGS(Monitor and Control Generated System) configuration software, it realizes data collection and dynamic monitoring, data processing. Through the control system, it achieves automatic control to foamed cement mixing device. Experiments show the system has advantanges of high precision, reliability and good maintain.

Research and Application of DDE Network Communication in Configuration Software

2013 ◽  
Vol 401-403 ◽  
pp. 1935-1938
Author(s):  
Yin Juan Zhang
Keyword(s):  
Control System ◽  
Data Exchange ◽  
Control Object ◽  
Configuration Software ◽  
Network Communication ◽  
Object Model ◽  
Dynamic Data ◽  
Interactive Interface ◽  
Theory Research ◽  
Research And Design

The network communication between MATLAB and configuration software is established using DDE(Dynamic Data Exchange) technology, which is easily to give full play to generate interactive interface in configuration software and simulation of control object model in MATLAB software. The calculation function of weakness in configuration software is repaired and the control object model and controller is to be isolated. The effective simulation platform for theory research and design of control system is established.

Control Algorithm Study on Cantilever Machine Teaching-Playback

2014 ◽  
Vol 635-637 ◽  
pp. 1212-1215
Author(s):  
Ruo Han Liu ◽  
Chun Hua Li
Keyword(s):  
Control System ◽  
Intelligent Control ◽  
Control Algorithm ◽  
Control Method ◽  
Tracking Error ◽  
Cutting Parameters ◽  
Configuration Software ◽  
Monitoring Site ◽  
Software Monitoring ◽  
Operation Panel

In order to realize intelligent control, the cutting trajectory of TBM research machine adopts the principle of teaching and reappearing cutting trajectory control method, combining with the control system of teaching and reappearing and SIMATIC C7, operation interface is realized by using configuration software monitoring, monitoring site visually through the operation panel parameters change, timely adjust the cutting parameters. The experimental results show that the tracking error within the scope of the permit. The method to improve the intelligence of machine cutting control provides a reference basis.

Automation Control System of Pharmaceutical Factory Based on Wireless Sensor Network

2013 ◽  
Vol 397-400 ◽  
pp. 1271-1277
Author(s):  
Qiu Feng Shang ◽  
Lin Zhang
Keyword(s):  
Control System ◽  
Production Efficiency ◽  
Configuration Software ◽  
Plant Production ◽  
Wireless Sensor ◽  
Pharmaceutical Factory ◽  
Labview Software ◽  
Plc Control ◽  
Zigbee Technology ◽  
Automation Control

In view of the traditional wired sensing network PLC control system wiring difficulty, the equipment mobilized shortcoming, this article has designed based on the ZigBee wireless communication pharmaceutical factory automation control system. Using the ZigBee technology realization wireless sensing network, completes automatically to the plant production in various parameters monitor, the analysis, processing, automatically does not conform to the request parameter to completely or the part production process in to carry on the adjustment. This design uses the LabView software to replace the configuration software to complete the backstage the movement. Using LabView to carry on the instrument system the design, the examination and the realization, may reduce the system the development time, enhances the production efficiency. This system has the broad application prospect.

Design and Realization of One Key Download Software Based on Distributed Control System

2011 ◽  
Vol 148-149 ◽  
pp. 1037-1040
Author(s):  
Ya Guang Kong ◽  
Biao Huang
Keyword(s):  
Control System ◽  
Distributed Control ◽  
Configuration Software ◽  
Distributed Control System ◽  
Download Time ◽  
Hardware Configuration

In view of the complex and error-prone steps when hardware configuration software downloads its engineering files to control templates in a distributed control system, the OneKeyDownload was designed to develop the hardware configuration software, and it was realized by C++. The practice shows that the developments of OneKeyDownload not only simplify the download steps, but also shorten the download time, and it can download the files according to the accurate order by judging the control template is master or slave automatically.

Research on the KingSCADA Crude Oil Transmission Separator in Oil Level Automatic Control System

2014 ◽  
Vol 1046 ◽  
pp. 232-235
Author(s):  
Na Liu
Keyword(s):  
Control System ◽  
Automatic Control ◽  
Crude Oil ◽  
Automatic Control System ◽  
Configuration Software ◽  
Hardware Platform ◽  
Remote Transmission ◽  
Oil Transportation ◽  
Level Transmitter ◽  
Visual Interface

Using industrial machines, magnetic sub-level transmitter, AI Artificial Intelligence regulator, Germany HERION solenoid valve for the hardware platform, and KingSCADA configuration software for software platform, constituting Crude Oil Transportation separator oil level automatic control system, according to the production process requirement automatically keep the oil level in a need value, then realize automatic oil level collection, display, record, remote transmission, the visual interface.

The Development and Design of Human Machine Interface of the Monitor & Control System for Nuclear Power Plants

2011 ◽  
Vol 121-126 ◽  
pp. 4156-4160
Author(s):  
Shou Yu Cheng ◽  
Xin Kai Liu ◽  
Min Jun Peng
Keyword(s):  
Control System ◽  
Nuclear Power ◽  
Power Plants ◽  
Human Error ◽  
Nuclear Power Plants ◽  
Computer Software ◽  
Human Machine Interface ◽  
Configuration Software ◽  
Control Room ◽  
Machine Interface

The Human Machine Interface (HMI) of Monitor& Control System (MCS) is an important part of main control room in Nuclear Power Plants (NPP). The MCS is integrated by networks, digital computers and computer software. The paper discusses a new design mode for the HMI of MCS in Nuclear Power Plants. How to make the MCS information available is the focus of the HMI research. The paper discusses the design and research about the main layout and functions of the HMI. In order to verify and validate the design of HMI, the HMI of MCS is developed by a configuration software of JADE. HMI debugged with the NPP simulator. The Test illustrates that the HMI can help the operators to get very important information from MCS, which help the operators to operate the nuclear plant safely and reduces the human error.

Sign in / Sign up

Export Citation Format

Share Document