A high performance, high voltage output buffer in a low voltage CMOS process

Author(s):  
R. Chauhan ◽  
K. Rajagopal ◽  
V. Menezes ◽  
H.M. Roopashree ◽  
S.K. Jacob

2012 ◽  
Vol 203 ◽  
pp. 469-473
Author(s):  
Ruei Chang Chen ◽  
Shih Fong Lee

This paper presents the design and implementation of a novel pulse width modulation control class D amplifiers chip. With high-performance, low-voltage, low-power and small area, these circuits are employed in portable electronic systems, such as the low-power circuits, wireless communication and high-frequency circuit systems. This class D chip followed the chip implementation center advanced design flow, and then was fabricated using Taiwan Semiconductor Manufacture Company 0.35-μm 2P4M mixed-signal CMOS process. The chip supply voltage is 3.3 V which can operate at a maximum frequency of 100 MHz. The total power consumption is 2.8307 mW, and the chip area size is 1.1497×1.1497 mm2. Finally, the class D chip was tested and the experimental results are discussed. From the excellent performance of the chip verified that it can be applied to audio amplifiers, low-power circuits, etc.



Author(s):  
Juan Zhang ◽  
Qingli Xu ◽  
Xiangyu Qian ◽  
Xinhou Wang ◽  
Kun Zhang

Yarn-shaped supercapacitors (YSSCs) based on aqueous electrolyte exhibit relatively low voltage output due to the low decomposition voltage of water (~1.23 V). Applying organic-based electrolyte or connecting YSSCs in series...



Author(s):  
Kasemsan Siri ◽  
Michael Willhoff ◽  
Kenneth A. Conner ◽  
Duc Q. Tran


2011 ◽  
Vol 58-60 ◽  
pp. 727-732
Author(s):  
Hai Chu Chen ◽  
Rui Hua Zhang ◽  
Gen Liang Xiong ◽  
Fa Yun Liang ◽  
Ling Teng Liu

In order to decrease output micro-flux ripple wave characteristics of the piezoelectric driven micro-flux valve, it carried out research on piezoelectric ceramics driving power supply. In the research, it especially designed the low-voltage and high-voltage stabilizing circuit, small signal amplifying circuit and power amplifying circuit. By applying the power supply, the function signal would be amplified to a high-voltage output to drive the piezoelectric ceramics stack (PZT) to control displacement of the micro-flux valve’s spool, and then realize precise control the micro-flux of the valve. At last, it carried out experimentations on the output characteristics of the power supply, and the experimental results proved the output signal of the power supply have excellent input-output linearity and small ripple wave characteristics, and the high-voltage output ripple wave error is less than 10mV. More over, it used the power supply to drive an 8×8×20mm PZT with capacitance 2.3, and measured the quickly discharging characteristics. The results prove the quickly discharging time is only 10.10ms when the driving voltage is 180V, which means the power supply has excellent quickly discharging characteristics.





Sign in / Sign up

Export Citation Format

Share Document