Deterministic deployment of in-plane silicon nanowires for high performance large area electronics

Author(s):  
Han Yin ◽  
Xiaoxiang Wu ◽  
Jun Xu ◽  
Kunji Chen ◽  
Linwei Yu
2013 ◽  
Vol 1553 ◽  
Author(s):  
R. A. Sporea ◽  
S. Georgakopoulos ◽  
X. Xu ◽  
X. Guo ◽  
M. Shkunov ◽  
...  

ABSTRACTIn order to achieve high performance, the design of devices for large-area electronics needs to be optimized despite material or fabrication shortcomings. In numerous emerging technologies thin-film transistor (TFT) performance is hindered by contact effects. Here, we show that contact effects can be used constructively to create devices with performance characteristics unachievable by conventional transistor designs. Source-gated transistors (SGTs) are not designed with increasing transistor speed, mobility or sub-threshold slope in mind, but rather with improving certain aspects critical for real-world large area electronics such as stability, uniformity, power efficiency and gain. SGTs can achieve considerably lower saturation voltage and power dissipation compared to conventional devices driven at the same current; higher output impedance for over two orders of magnitude higher intrinsic gain; improved bias stress stability in amorphous materials; higher resilience to processing variations; current virtually independent of source-drain gap, source-gate overlap and semiconductor thickness variations. Applications such as amplifiers and drivers for sensors and actuators, low cost large area analog or digital circuits could greatly benefit from incorporating the SGT architecture.


Nature ◽  
2018 ◽  
Vol 562 (7726) ◽  
pp. 254-258 ◽  
Author(s):  
Zhaoyang Lin ◽  
Yuan Liu ◽  
Udayabagya Halim ◽  
Mengning Ding ◽  
Yuanyue Liu ◽  
...  

2008 ◽  
Vol 18 (04) ◽  
pp. 1055-1068
Author(s):  
MOHAMMAD R. ESMAEILI-RAD ◽  
HYUN JUNG LEE ◽  
ANDREI SAZONOV ◽  
AROKIA NATHAN

Nanocrystalline silicon ( nc - Si ) thin film transistors (TFTs) have potential for high-performance applications in large area electronics, such as next generation of flat panel displays and medical x-ray imagers, for pixel drivers, readout circuits, as well as complementary channel logic circuits for system-on-panel integration. This potential stems from reduced threshold voltage shift and higher transconductance, compared to amorphous silicon counterpart. In this paper, we discuss various TFT structures, their associated design and performance considerations, including leakage current and threshold voltage stability mechanisms.


Author(s):  
Mahesh Soni ◽  
Dhayalan Shakthivel ◽  
Adamos Christou ◽  
Ayoub Zumeit ◽  
Nivasan Yogeswaran ◽  
...  

Sensors ◽  
2021 ◽  
Vol 21 (6) ◽  
pp. 2163
Author(s):  
Dongjin Kim ◽  
Seungyong Han ◽  
Taewi Kim ◽  
Changhwan Kim ◽  
Doohoe Lee ◽  
...  

As the safety of a human body is the main priority while interacting with robots, the field of tactile sensors has expanded for acquiring tactile information and ensuring safe human–robot interaction (HRI). Existing lightweight and thin tactile sensors exhibit high performance in detecting their surroundings. However, unexpected collisions caused by malfunctions or sudden external collisions can still cause injuries to rigid robots with thin tactile sensors. In this study, we present a sensitive balloon sensor for contact sensing and alleviating physical collisions over a large area of rigid robots. The balloon sensor is a pressure sensor composed of an inflatable body of low-density polyethylene (LDPE), and a highly sensitive and flexible strain sensor laminated onto it. The mechanical crack-based strain sensor with high sensitivity enables the detection of extremely small changes in the strain of the balloon. Adjusting the geometric parameters of the balloon allows for a large and easily customizable sensing area. The weight of the balloon sensor was approximately 2 g. The sensor is employed with a servo motor and detects a finger or a sheet of rolled paper gently touching it, without being damaged.


2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Muhammad Naqi ◽  
Kyung Hwan Choi ◽  
Hocheon Yoo ◽  
Sudong Chae ◽  
Bum Jun Kim ◽  
...  

AbstractLow-temperature-processed semiconductors are an emerging need for next-generation scalable electronics, and these semiconductors need to feature large-area fabrication, solution processability, high electrical performance, and wide spectral optical absorption properties. Although various strategies of low-temperature-processed n-type semiconductors have been achieved, the development of high-performance p-type semiconductors at low temperature is still limited. Here, we report a unique low-temperature-processed method to synthesize tellurium nanowire networks (Te-nanonets) over a scalable area for the fabrication of high-performance large-area p-type field-effect transistors (FETs) with uniform and stable electrical and optical properties. Maximum mobility of 4.7 cm2/Vs, an on/off current ratio of 1 × 104, and a maximum transconductance of 2.18 µS are achieved. To further demonstrate the applicability of the proposed semiconductor, the electrical performance of a Te-nanonet-based transistor array of 42 devices is also measured, revealing stable and uniform results. Finally, to broaden the applicability of p-type Te-nanonet-based FETs, optical measurements are demonstrated over a wide spectral range, revealing an exceptionally uniform optical performance.


Sign in / Sign up

Export Citation Format

Share Document