Determination of the insertion loss of EMI filters using a black-box model

2015 ◽  
Author(s):  
Carlos Cuellar ◽  
Nadir Idir
Keyword(s):  
Insertion Loss ◽  
Black Box ◽  
Box Model ◽  
Emi Filters

Simulation Model of the Dynamic Behavior of a Tire Running Over an Obstacle

1988 ◽  
Vol 16 (2) ◽  
pp. 62-77 ◽  
Author(s):  
P. Bandel ◽  
C. Monguzzi
Keyword(s):  
Simulation Model ◽  
Dynamic Behavior ◽  
Black Box ◽  
Box Model ◽  
Vehicle Suspension ◽  
Empirical Relationships ◽  
Static Tests ◽  
High Speeds ◽  
Dynamic Forces ◽  
Vehicle Suspension System

Abstract A “black box” model is described for simulating the dynamic forces transmitted to the vehicle hub by a tire running over an obstacle at high speeds. The tire is reduced to a damped one-degree-of-freedom oscillating system. The five parameters required can be obtained from a test at a given speed. The model input is composed of a series of empirical relationships between the obstacle dimensions and the displacement of the oscillating system. These relationships can be derived from a small number of static tests or by means of static models of the tire itself. The model can constitute the first part of a broader model for description of the tire and vehicle suspension system, as well as indicating the influence of tire parameters on dynamic behavior at low and medium frequencies (0–150 Hz).

scholarly journals MFPP: Morphological Fragmental Perturbation Pyramid for Black-Box Model Explanations

2021 ◽  
Author(s):  
Qing Yang ◽  
Xia Zhu ◽  
Jong-Kae Fwu ◽  
Yun Ye ◽  
Ganmei You ◽  
...  
Keyword(s):  
Black Box ◽  
Box Model

scholarly journals Synchronous Machine Winding Modeling Method Based on Broadband Characteristics

2021 ◽  
Vol 11 (10) ◽  
pp. 4631
Author(s):  
Yu Chen ◽  
Xiaoqing Ji ◽  
Zhongyong Zhao
Keyword(s):  
Equivalent Circuit ◽  
High Frequency ◽  
Equivalent Circuit Model ◽  
Black Box ◽  
Synchronous Machine ◽  
Circuit Model ◽  
Modeling Method ◽  
Experimental Results ◽  
Box Model ◽  
Impedance Curve

The accurate establishment of the equivalent circuit model of the synchronous machine windings’ broadband characteristics is the basis for the study of high-frequency machine problems, such as winding fault diagnosis and electromagnetic interference prediction. Therefore, this paper proposes a modeling method for synchronous machine winding based on broadband characteristics. Firstly, the single-phase high-frequency lumped parameter circuit model of synchronous machine winding is introduced, then the broadband characteristics of the port are analyzed by using the state space model, and then the equivalent circuit parameters are identified by using an optimization algorithm combined with the measured broadband impedance characteristics of port. Finally, experimental verification and comparison experiments are carried out on a 5-kW synchronous machine. The experimental results show that the proposed modeling method identifies the impedance curve of the circuit parameters with a high degree of agreement with the measured impedance curve, which indicates that the modeling method is feasible. In addition, the comparative experimental results show that, compared with the engineering exploratory calculation method, the proposed parameter identification method has stronger adaptability to the measured data and a certain robustness. Compared with the black box model, the parameters of the proposed model have a certain physical meaning, and the agreement with the actual impedance characteristic curve is higher than that of the black box model.

CYBERNETIC MODEL IN PLANNING AND FORECASTING

2020 ◽  
Author(s):  
D.S. Serebryanaya ◽  
Keyword(s):  
Higher Education ◽  
Building Materials ◽  
Black Box ◽  
Box Model ◽  
Sociological Research ◽  
Mathematical Approach ◽  
Cybernetic Model ◽  
Corrective Measures

This article analyzes the mathematical approach to the study of the motives of students to study in higher education. The possibility of using the “black box” model used in the production of building materials for sociological research is considered. This approach allows you to see the most significant causes of discrepancies and develop corrective measures for them.

Modeling and Analysis of Active EMI Filters with Cascade Connection to Improve the Insertion loss

2021 ◽  
Author(s):  
Yongxing Zhou ◽  
Haoyu Wang ◽  
Wenjie Chen ◽  
Ruitao Yan ◽  
Jinlu Liu ◽  
...  
Keyword(s):  
Insertion Loss ◽  
Modeling And Analysis ◽  
Cascade Connection ◽  
Emi Filters

Determination of Insertion Loss of noise barriers in Spanish roads

2022 ◽  
Vol 186 ◽  
pp. 108435
Author(s):  
Juan M. Martinez-Orozco ◽  
Antonio Barba
Keyword(s):  
Insertion Loss ◽  
Noise Barriers

Investigation of Black Box Model for Erbium-Doped Fiber Amplifiers in Space Radiation Environment

2012 ◽  
Vol 30 (23) ◽  
pp. 3667-3671 ◽  
Author(s):  
Mi Li ◽  
Jing Ma ◽  
Xuping Zhang ◽  
Yuejiang Song ◽  
Wenhe Du
Keyword(s):  
Space Radiation ◽  
Black Box ◽  
Fiber Amplifiers ◽  
Box Model ◽  
Radiation Environment ◽  
Erbium Doped ◽  
Space Radiation Environment
Sign in / Sign up

Export Citation Format

Share Document