3-D low-loss coplanar waveguide transmission line structures with wide range of characteristic impedance for MMICs

2005 ◽  
Author(s):  
V.T. Vo ◽  
L. Krishnamurthy ◽  
Q. Sun ◽  
A.A. Rezazadeh ◽  
R. Sloan
Keyword(s):  
Transmission Line ◽  
Coplanar Waveguide ◽  
Characteristic Impedance ◽  
Low Loss ◽  
Wide Range ◽  
Waveguide Transmission

Low Loss Gap Waveguide Transmission line and Transitions at 220–320 GHz Using Dry Film Micromachining

2021 ◽  
pp. 1-1
Author(s):  
Sadia Farjana ◽  
Mohammadamir Ghaderi ◽  
Ashraf Uz Zaman ◽  
Sofia Rahiminejad ◽  
Per Lundgren ◽  
...  
Keyword(s):  
Transmission Line ◽  
Low Loss ◽  
Waveguide Transmission ◽  
Dry Film

A Low Loss Fully Embedded Stripline Parallel Coupled BPF for Applications using the 60 GHz Band

2011 ◽  
Vol 2011 (CICMT) ◽  
pp. 000050-000053
Author(s):  
Alexander Schulz ◽  
Sven Rentsch ◽  
Lei Xia ◽  
Robert Mueller ◽  
Jens Mueller
Keyword(s):  
Return Loss ◽  
Bandpass Filter ◽  
Coplanar Waveguide ◽  
Center Frequency ◽  
60 Ghz ◽  
Low Loss ◽  
Wireless Applications ◽  
High Data ◽  
V Band ◽  
Waveguide Transmission

This paper presents a low loss fully embedded bandpass filter (BPF) using low temperature co-fired ceramic (LTCC) for multilayer System-in-Package (SiP) and Multi-Chip-Module (MCM) applications, e.g. wireless applications for the unlicensed 60 GHz band. The measured insertion loss was 1.5 dB at the center frequency 58 GHz, and a return loss of less than −10 dB was achieved, including two grounded coplanar waveguide transmission line (CPWg) to stripline transitions. The four layers BPF has a 3 dB bandwidth of about 11 GHz which supplies e.g. broadband and high data rate applications. The whole BPF requires a substrate area of 5.6 × 2.1 × 0.42 mm3 with transitions and a shielding via fence. This BPF suits well for V-band applications in a LTCC package because of the compact dimensions and the good performance.

scholarly journals Solving the Complexity Problem in the Electronics Production Process by Reducing the Sensitivity of Transmission Line Characteristics to Their Parameter Variations

Complexity ◽  
2019 ◽  
Vol 2019 ◽  
pp. 1-11 ◽  
Author(s):  
Talgat R. Gazizov ◽  
Indira Ye. Sagiyeva ◽  
Sergey P. Kuksenko
Keyword(s):  
Transmission Line ◽  
Production Process ◽  
Transmission Lines ◽  
Unit Length ◽  
Characteristic Impedance ◽  
Optimal Choice ◽  
Wide Range ◽  
Complexity Problem ◽  
Parameter Variations ◽  
Parameter Values

In this paper we consider the complexity problem in electronics production process. Particularly, we investigate the ways to reduce sensitivity of transmission line characteristics to their parameter variations. The reduction is shown for the per-unit-length delay and characteristic impedance of several modifications of microstrip transmission lines. It can be obtained by means of making an optimal choice of parameter values, enabling proper electric field redistribution in the air and the substrate. To achieve this aim we used an effective simulation technique and software tools. Taken together, for the first time, they have allowed formulating general approach which is relevant to solve a wide range of similar tasks.

Sign in / Sign up

Export Citation Format

Share Document