Low-Profile Conformal Circular Beam-Steering Array with Ultra-Broad Instantaneous Bandwidth

Author(s):  
Johnson J. H. Wang ◽  
David J. Triplett
2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
Shruti Vashist ◽  
M. K. Soni ◽  
P. K. Singhal

Rotman lenses are the beguiling devices used by the beamforming networks (BFNs). These lenses are generally used in the radar surveillance systems to see targets in multiple directions due to its multibeam capability without physically moving the antenna system. Now a days these lenses are being integrated into many radars and electronic warfare systems around the world. The antenna should be capable of producing multiple beams which can be steered without changing the orientation of the antenna. Microwave lenses are the one who support low-phase error, wideband, and wide-angle scanning. They are the true time delay (TTD) devices producing frequency independent beam steering. The emerging printed lenses in recent years have facilitated the advancement of designing high performance but low-profile, light-weight, and small-size and networks (BFNs). This paper will review and analyze various design concepts used over the years to improve the scanning capability of the lens developed by various researchers.


Author(s):  
Yelena A. Litinskaya ◽  
Stanislav V. Polenga ◽  
Yury P. Salomatov ◽  
Anastasia A. Baskova

Electronics ◽  
2020 ◽  
Vol 9 (8) ◽  
pp. 1191
Author(s):  
David Rotshild ◽  
Efraim Rahamim ◽  
Amir Abramovich

A tunable reflector component based on metasurface (MS) with a low profile and reduced mass is offered for indoor and outdoor 5G communication methods to overcome obstacles such as buildings, walls, and turns, and to allow wireless quasi-line of sight path communication at 37 GHz. Integrating varactors with MS unit cells allows tunability and reconfigurability. This approach was presented in many studies, with frequencies of up to K–band. However, today, higher frequencies are used, especially in communication. This work presents the design of a reconfigurable MS reflector, at Ka-band frequencies, based on a new type of resonant unit cell, with uniformed reflection for wide-incident-angular-range, and a simple stimulating DC bias for each MS unit cell, which allows a two–dimensional (2-D) continuous reflection phase manipulation. The unit cell provides a dynamic reflection phase range of over 300° at a wide bandwidth. Simulations of one-dimensional (1-D) and (2-D) at 37 GHz are presented. A steering range of up to ±48° was obtained for azimuth or elevation. A simultaneous independent 2-D beam steering range of up to ±10° in azimuth and up to ± 5° in elevation, allowing obstacles to overcome covering at a practical angular spatial cone of 20° and 10°, is presented.


Author(s):  
Chung-Tse Michael Wu ◽  
Pai-Yen Chen

In this chapter, we will review recent research advances on beamforming and spatial multiplexing techniques using reconfigurable metamaterials (MTMs) and metasurfaces. This chapter starts by discussing basic principles and practical applications of transmission line-based metamaterials and planar metasurfaces, followed by their active versions that enable novel smart antennas with beam steering and beamshaping functions. We include detailed descriptions of their practical realizations and the integration with circuits and the radio-frequency (RF) frontend, which are used to adaptively and dynamically manipulate electromagnetic radiation. We summarize the state-of-the-art MTM/metasurface-based beamforming techniques and provide a critical comparison for their uses in the RF-to-millimeter-wave range in terms of cost, reconfigurability, system integratability and radiation properties. These techniques are expected to pave the way for the massive deployment of communication, radar, remote sensing and medical and security imaging systems.


2012 ◽  
Vol 60 (4) ◽  
pp. 1796-1802 ◽  
Author(s):  
Daniel Rodrigo ◽  
Lluís Jofre ◽  
Bedri A. Cetiner

2017 ◽  
Vol 65 (8) ◽  
pp. 3905-3912 ◽  
Author(s):  
Arpan Pal ◽  
Amit Mehta ◽  
Dariush Mirshekar-Syahkal ◽  
Hisamatsu Nakano

2006 ◽  
Vol 54 (11) ◽  
pp. 3338-3346 ◽  
Author(s):  
J.J.H. Wang ◽  
D.J. Triplett ◽  
C.J. Stevens
Keyword(s):  

Author(s):  
Y. A. Litinskaya ◽  
S. V. Polenga ◽  
Y. P. Salomatov

Introduction. Introduction. Low-profile effective antenna systems (AS) with maintained directional characteristics in a wide sector of scanning angles are required for satellite communication at mobile objects. This article investigates the directional characteristics of a subarray based on a Fabry–Perot cavity and an antenna array with mechanoelectrical beam steering.Aim. To investigate a Fabry–Perot based antenna array with mechanoelectrical beam steering and to estimate its gain and directivity at different scanning angles.Materials and methods. Computer simulations were carried out using the finite element method (FEM), finite difference time domain (FDTD) method and template based post-processing.Results. A subarray based on a Fabry–Perot cavity for an antenna array with mechanoelectrical beam steering was simulated. The efficiency of the subarray comprised at least 65 % in the 11.9…12.5 GHz frequency band. An antenna array based on a Fabry–Perot cavity with mechanoelectrical beam steering was developed and investigated. The calculated characteristics of the developed antenna array agreed well with those obtained experimentally. The gain degradation did not exceed 2.5 dB in the 0…70° scanning angle range. The advantages of using antenna elements based on a Fabry–Perot cavity and developing on their basis mobile satellite antenna systems with wide-angle scanning are noted.Conclusion. The use of a radiator based on a Fabry–Perot cavity and the development on it basis an antenna array with mechanoelectrical beam steering provides an antenna efficiency of no less than 0.5 with a gain degradation of no more than 2.5 dB in the scanning angle range 0…70° from 11.9 to 12.5 GHz.


Sign in / Sign up

Export Citation Format

Share Document