Network Stress Assessment of Planning Distribution Approach on High Penetrations E-Mobility and DERs

Author(s):  
Candra Agus Dwi Wahyudi ◽  
Fathin Saifur Rahman
Keyword(s):  
2011 ◽  
Author(s):  
Barry D. Adams ◽  
Richard Westphal

2021 ◽  
Vol 13 (13) ◽  
pp. 2634
Author(s):  
Qiyuan Wang ◽  
Yanling Zhao ◽  
Feifei Yang ◽  
Tao Liu ◽  
Wu Xiao ◽  
...  

Vegetation heat-stress assessment in the reclamation areas of coal gangue dumps is of great significance in controlling spontaneous combustion; through a temperature gradient experiment, we collected leaf spectra and water content data on alfalfa. We then obtained the optimal spectral features of appropriate leaf water content indicators through time series analysis, correlation analysis, and Lasso regression analysis. A spectral feature-based long short-term memory (SF-LSTM) model is proposed to estimate alfalfa’s heat stress level; the live fuel moisture content (LFMC) varies significantly with time and has high regularity. Correlation analysis of the raw spectrum, first-derivative spectrum, spectral reflectance indices, and leaf water content data shows that LFMC and spectral data were the most strongly correlated. Combined with Lasso regression analysis, the optimal spectral features were the first-derivative spectral value at 1661 nm (abbreviated as FDS (1661)), RVI (1525,1771), DVI (1412,740), and NDVI (1447,1803). When the classification strategies were divided into three categories and the time sequence length of the spectral features was set to five consecutive monitoring dates, the SF-LSTM model had the highest accuracy in estimating the heat stress level in alfalfa; the results provide an important theoretical basis and technical support for vegetation heat-stress assessment in coal gangue dump reclamation areas.


Author(s):  
Tsunemichi Takahama ◽  
Kazuma Nishimura ◽  
Seiichiro Ninomiya ◽  
Yoshihiro Matsumoto ◽  
Yutaka Harada

To assess the stresses on small-bore piping, we have developed a new tool that can be easily installed on a piping surface without adhesive bonding and that measures strains on piping quickly and accurately. This tool, which we call a “strain gauge holder,” is patented in Japan. As the tool can contain four strain gauge rosettes, with each rosette comprising three elements, the longitudinal strains and sheer strains can be measured synchronously at any four points precisely 90 degrees apart, with one point in each quadrant. By mockup testing, we confirmed that the measured bending and torsional strains by the holder were almost equivalent to the measured strains by the bonded gauges with adhesive, and that the holder made it possible to synchronously measure all of the strains resulting from the moment of force acting in three axes on the piping by measuring the bending and torsional strains in each quadrant. The strain gauge holder is expected to significantly reduce the pre- and post-working time required for strain measurement and stress assessment of piping in real plants.


2015 ◽  
Vol 659 ◽  
pp. 623-627 ◽  
Author(s):  
Cherdpong Jomdecha ◽  
Isaratat Phung-On

The objective of this paper is an analysis of statistical discreteness and measurement capability of an eddy-current measurement system for residual stress assessment in stainless steel Grade 304 (SS304). Cylindrical specimens with 50 mm in diameter and 12 mm thickness were prepared to generate residual stress by Resistance Spot Welding at which the welding currents were set at 12, 14, and 16 kA. The eddy-current measurement system was including a probe with frequency range of 0.1 to 3 MHz and an eddy current flaw detector. They were performed by contacting the probe on the specimen. The measurements were performed particularly in the vicinity of heat affected zone (HAZ). In order to determine the results of the residual stress measurement, the calibration curves between static tensile stress and eddy current impedance at various frequencies were accomplished. The Measurement System Analysis (MSA) was utilized to evaluate the changed eddy-current probe impedance from residual stress. The results showed that using eddy current technique at 1 MHz for residual stress measurement was the most efficient. It can be achieved the Gauge Repeatability & Reproducibility %GR&R at 16.61479 and Number of Distinct Categories (NDC) at 8. As applied on actual butt welded joint, it could yield the uncertainty of ± 58 MPa at 95 % (UISO).


2018 ◽  
Vol 56 (3) ◽  
pp. 228-240 ◽  
Author(s):  
Hanne AUSTAD ◽  
Øystein WIGGEN ◽  
Hilde FÆREVIK ◽  
Trine M. SEEBERG

2007 ◽  
Vol 26 (3) ◽  
pp. 598-605 ◽  
Author(s):  
Frieke M.A. Box ◽  
Rob J. van der Geest ◽  
Jeroen van der Grond ◽  
Matthias J.P. van Osch ◽  
Aeilko H. Zwinderman ◽  
...  

2021 ◽  
Author(s):  
Fares Al-Shargie ◽  
Rateb Katmah ◽  
Usman Tariq ◽  
Fabio Babiloni ◽  
Fadwa Al-Mughairbi ◽  
...  
Keyword(s):  

2018 ◽  
Vol 35 (3) ◽  
pp. 409-418 ◽  
Author(s):  
Erhan Tenekecioglu ◽  
Ryo Torii ◽  
Yuki Katagiri ◽  
Ply Chichareon ◽  
Taku Asano ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document