scholarly journals Integration of solar energy and optimized economic dispatch using genetic algorithm: A case-study of Abu Dhabi

Author(s):  
Muhammad Akmal ◽  
Samr Ali ◽  
Yasmina Al Khalil ◽  
Nusrat Binte Iqbal ◽  
Salim Alzaabi
Author(s):  
Adriano Lima Pedrosa ◽  
Nadime Mustafa Moraes ◽  
Jorge Laureano Moya Rodríguez ◽  
Henrique Reis do Nascimento ◽  
Silas Farias Fernandes Filho

2018 ◽  
Vol 12 (3) ◽  
pp. 181-187
Author(s):  
M. Erkan Kütük ◽  
L. Canan Dülger

An optimization study with kinetostatic analysis is performed on hybrid seven-bar press mechanism. This study is based on previous studies performed on planar hybrid seven-bar linkage. Dimensional synthesis is performed, and optimum link lengths for the mechanism are found. Optimization study is performed by using genetic algorithm (GA). Genetic Algorithm Toolbox is used with Optimization Toolbox in MATLAB®. The design variables and the constraints are used during design optimization. The objective function is determined and eight precision points are used. A seven-bar linkage system with two degrees of freedom is chosen as an example. Metal stamping operation with a dwell is taken as the case study. Having completed optimization, the kinetostatic analysis is performed. All forces on the links and the crank torques are calculated on the hybrid system with the optimized link lengths


Smart Cities ◽  
2021 ◽  
Vol 4 (3) ◽  
pp. 1039-1057
Author(s):  
Amro M. Farid ◽  
Asha Viswanath ◽  
Reem Al-Junaibi ◽  
Deema Allan ◽  
Thomas J. T. Van der Van der Wardt

Recently, electric vehicles (EV) have gained much attention as a potential enabling technology to support CO2 emissions reduction targets. Relative to their internal combustion vehicle counterparts, EVs consume less energy per unit distance, and add the benefit of not emitting any carbon dioxide in operation and instead shift their emissions to the existing local fleet of power generation. However, the true success of EVs depends on their successful integration with the supporting infrastructure systems. Building upon the recently published methodology for the same purpose, this paper presents a “systems-of-systems” case study assessing the impacts of EVs on these three systems in the context of Abu Dhabi. For the physical transportation system, a microscopic discrete-time traffic operations simulator is used to predict the kinematic state of the EV fleet over the duration of one day. For the impact on the intelligent transportation system (ITS), the integration of EVs into Abu Dhabi is studied using a multi-domain matrix (MDM) of the Abu Dhabi Department of Transportation ITS. Finally, for the impact on the electric power system, the EV traffic flow patterns from the CMS are used to calculate the timing and magnitude of charging loads. The paper concludes with the need for an intelligent transportation-energy system (ITES) which would coordinate traffic and energy management functionality.


Electricity ◽  
2021 ◽  
Vol 2 (1) ◽  
pp. 91-109
Author(s):  
Julian Wruk ◽  
Kevin Cibis ◽  
Matthias Resch ◽  
Hanne Sæle ◽  
Markus Zdrallek

This article outlines methods to facilitate the assessment of the impact of electric vehicle charging on distribution networks at planning stage and applies them to a case study. As network planning is becoming a more complex task, an approach to automated network planning that yields the optimal reinforcement strategy is outlined. Different reinforcement measures are weighted against each other in terms of technical feasibility and costs by applying a genetic algorithm. Traditional reinforcements as well as novel solutions including voltage regulation are considered. To account for electric vehicle charging, a method to determine the uptake in equivalent load is presented. For this, measured data of households and statistical data of electric vehicles are combined in a stochastic analysis to determine the simultaneity factors of household load including electric vehicle charging. The developed methods are applied to an exemplary case study with Norwegian low-voltage networks. Different penetration rates of electric vehicles on a development path until 2040 are considered.


Author(s):  
D Kodirov ◽  
O Tursunov ◽  
A Ahmedov ◽  
R Khakimov ◽  
M Rakhmataliev

Author(s):  
Alireza Refiei ◽  
Reyhaneh Loni ◽  
Gholamhassan Najafi ◽  
Evangelos Bellos ◽  
Mohsen Sharifpur ◽  
...  

Author(s):  
John F. McGrew

This paper discusses a case study of a design and evaluation of a change management system at a large Telecommunications Corporation. The design and evaluation were done using the facilitated genetic algorithm (a parallel design method) and user decision style analysis. During the facilitated genetic algorithm the design team followed the procedure of the genetic algorithm. Usability was evaluated by applying user decision style analysis to the designed system. The design is compared with an existing system and with one designed by an analyst. The change management system designed by the facilitated genetic algorithm took less time to design and decision style analysis indicated it would be easier to use than the other two systems.


Sign in / Sign up

Export Citation Format

Share Document