scholarly journals Millimeter-wave folded reflector antennas with high gain, low loss, and low profile

2002 ◽  
Vol 44 (3) ◽  
pp. 24-29 ◽  
Author(s):  
W. Menzel ◽  
D. Pilz ◽  
M. Al-Tikriti
2019 ◽  
Vol 18 (11) ◽  
pp. 2394-2398 ◽  
Author(s):  
Julio Gonzalez Marin ◽  
Affan A. Baba ◽  
Daniel Lopez Cuenca ◽  
Jan Hesselbarth ◽  
Raheel M. Hashmi ◽  
...  

2016 ◽  
Vol 2016 ◽  
pp. 1-7 ◽  
Author(s):  
Xue-Xia Yang ◽  
Guan-Nan Tan ◽  
Bing Han ◽  
Hai-Gao Xue

A novel millimeter wave coplanar waveguide (CPW) fed Fabry-Perot (F-P) antenna with high gain, broad bandwidth, and low profile is reported. The partially reflective surface (PRS) and the ground form the F-P resonator cavity, which is filled with the same dielectric substrate. A dual rhombic slot loop on the ground acts as the primary feeding antenna, which is fed by the CPW and has broad bandwidth. In order to improve the antenna gain, metal vias are inserted surrounding the F-P cavity. A CPW-to-microstrip transition is designed to measure the performances of the antenna and extend the applications. The measured impedance bandwidth ofS11less than −10 dB is from 34 to 37.7 GHz (10.5%), and the gain is 15.4 dBi at the center frequency of 35 GHz with a 3 dB gain bandwidth of 7.1%. This performance of the antenna shows a tradeoff among gain, bandwidth, and profile.


2016 ◽  
Vol 5 (3) ◽  
pp. 98 ◽  
Author(s):  
M. A. Matin

The millimeter wave (mmWave) band is considered as the potential candidate for high speed communication services in 5G networks due to its huge bandwidth. Moreover, mmWave frequencies lead to miniaturization of RF front end including antennas. In this article, we provide an overview of recent research achievements of millimeter-wave antenna design along with the design considerations for compact antennas and antennas in package/on chip, mostly in the 60 GHz band is described along with their inherent benefits and challenges. A comparative analysis of various designs is also presented. The antennas with wide bandwidth, high-gain, compact size and low profile with easiness of integration in-package or on-chip with other components are required for 5G enabled applications. 


2016 ◽  
Vol 2016 ◽  
pp. 1-10 ◽  
Author(s):  
Cheng-Nan Hu ◽  
Dau-Chyrh Chang ◽  
Chung-Hang Yu ◽  
Tsai-Wen Hsaio ◽  
Der-Phone Lin

This paper presents a high gain millimeter-wave (mmW) low-temperature cofired ceramic (LTCC) microstrip antenna array with a compact, simple, and low-profile structure. Incorporating minimum mean square error (MMSE) adaptive algorithms with the proposed 64-element microstrip antenna array, the numerical investigation reveals substantial improvements in interference reduction. A prototype is presented with a simple design for mass production. As an experiment, HFSS was used to simulate an antenna with a width of 1 mm and a length of 1.23 mm, resonating at 38 GHz. Two identical mmW LTCC microstrip antenna arrays were built for measurement, and the center element was excited. The results demonstrated a return loss better than 15 dB and a peak gain higher than 6.5 dBi at frequencies of interest, which verified the feasibility of the design concept.


2011 ◽  
Vol E94-C (10) ◽  
pp. 1548-1556 ◽  
Author(s):  
Takana KAHO ◽  
Yo YAMAGUCHI ◽  
Kazuhiro UEHARA ◽  
Kiyomichi ARAKI

Sign in / Sign up

Export Citation Format

Share Document