Dynamic phasor based modelling of hybrid FC-PV module for microgrid application

Author(s):  
R. Chavan
Keyword(s):  
2020 ◽  
Vol 2 (1) ◽  
pp. 19-24
Author(s):  
Sakhr Mohammed Sultan ◽  
Chih Ping Tso ◽  
Ervina Efzan Mohd Noor ◽  
Fadhel Mustafa Ibrahim ◽  
Saqaff Ahmed Alkaff

Photovoltaic Thermal Solar Collector (PVT) is a hybrid technology used to produce electricity and heat simultaneously. Current enhancements in PVT are to increase the electrical and thermal efficiencies. Many PVT factors such as type of absorber, thermal conductivity, type of PV module and operating conditions are important parameters that can control the PVT performance. In this paper, an analytical model, using energy balance equations, is studied for PVT with an improved parallel flow absorber. The performance is calculated for a typical sunny weather in Malaysia. It was found that the maximum electrical and thermal efficiencies are 12.9 % and 62.6 %, respectively. The maximum outlet water temperature is 59 oC.


2018 ◽  
Vol 12 (2) ◽  
pp. 98 ◽  
Author(s):  
Jalaluddin . ◽  
Baharuddin Mire

Actual performance of photovoltaic module with solar tracking is presented. Solar radiation can be converted into electrical energy using photovoltaic (PV) modules. Performance of polycristalline silicon PV modules with and without solar tracking are investigated experimentally. The PV module with dimension 698 x 518 x 25 mm has maximum power and voltage is 45 Watt and 18 Volt respectively. Based on the experiment data, it is concluded that the performance of PV module with solar tracking increases in the morning and afternoon compared with that of fixed PV module. It increases about 18 % in the morning from 10:00 to 12:00 and in the afternoon from 13:30 to 14:00 (local time). This study also shows the daily performance characteristic of the two PV modules. Using PV module with solar tracking provides a better performance than fixed PV module. 


2010 ◽  
Vol 24 (2) ◽  
pp. 131-136 ◽  
Author(s):  
Ze Cheng ◽  
Bingfeng Li ◽  
Li Liu ◽  
Yanli Liu

2016 ◽  
Vol 40 (4) ◽  
pp. 481-489
Author(s):  
Shu-Tsung Hsu ◽  
Yean-San Long ◽  
Teng-Chun Wu

The photovoltaic (PV) industry is expanding rapidly to meet the growing renewable-energy demands globally. The failure-rate analysis indicated that a large portion of the accelerated PV module qualification failures were related to the failure of PV cell itself, which was leading to the yield loss of PV products during shipping or transportation. Therefore, the damaged cell (or module) caused by shipping is always one of the serious problems to impact the long-term reliability of PV product. This paper aims to propose a new test method of reliability evaluation for shipping pallet of solar product. The first scenario is the test pallet shipped in fab (e.g., fork-lift truck or hand-pallet truck). The second scenario is the test pallet transported from fab to fab by different vehicle (e.g., truck, train, aircraft, and shipboard). Consequently, detailed results were applied to SEMI Doc. 5431 and released as SEMI PV56-1214 by voting in December 2014. The solar cell/module/system makers and buyers, or any other party interested like package design, can thus have a common document to refer to when desired.


2021 ◽  
Vol 230 ◽  
pp. 111219
Author(s):  
Alae Azouzoute ◽  
Charaf Hajjaj ◽  
Houssain Zitouni ◽  
Massaab El Ydrissi ◽  
Oumaima Mertah ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document