Controller Design of Voltage Source Converter Using Nyquist Array

Author(s):  
Hamed Pourgharibshahi ◽  
Majid Taheri Andani ◽  
Zahra Ramezani ◽  
Kamran Yousefpour ◽  
Tahere Pourseif ◽  
...  
Author(s):  
Majid Taheri Andani ◽  
Hamed Pourgharibshahi ◽  
Zahra Ramezani ◽  
Hassan Zargarzadeh

2013 ◽  
Vol 712-715 ◽  
pp. 1760-1766
Author(s):  
Gang Wang ◽  
Zhuo Xin Sun ◽  
Yu Zhu

The elementary structure and operation principle of the VSC are introduced. Detailed analysis of the PWM control principle and the steady-state mathematical model. And a steady-state controller design scheme based on the PID control principle is also proposed. The simulation results show that the method have good control ability, quick response to breakdown and good stability.


Author(s):  
Anantha Krishnan Venkatesan ◽  
Senthil Kumar Natarajan

An effective and robust controller is designed using Levenberg-Marquardt (LM) algorithm-based Artificial Neural Network (ANN) for the solar Photo-Voltaic (PV) based distributed generation units for stabilizing the grid-connected microgrid (MG) under load changes and irradiance variations. A test system comprising of two PV units and one diesel generator unit connected to the utility grid is modelled and considered for the controller design in MATLAB/Simulink environment. PV generated power is injected into the grid through voltage source converter (VSC) regulated by using the proposed ANN controller. Based on the grid voltage and available PV generation, the ANN controller regulates the inverter current by setting the reference voltage vector to synthesize gating pulses for the inverter. The robustness of the controller design is analysed and validated through time-domain simulations by subjecting it to extreme operating conditions. The controller performance is evaluated by Integral Square Error (ISE) and Integral Time Absolute Error (ITAE) for the test system. The results are compared with conventional PI and PID controllers to prove the superior performing ANN controller.


2020 ◽  
Author(s):  
Ziya Özkan ◽  
Ahmet Masum Hava

In three-phase three-wire (3P3W) voltage-source converter (VSC) systems, utilization of filter inductors with deep saturation characteristics is often advantageous due to the improved size, cost, and efficiency. However, with the use of conventional synchronous frame current control (CSCC) methods, the inductor saturation results in significant dynamic performance loss and poor steady-state current waveform quality. This paper proposes an inverse dynamic model based compensation (IDMBC) method to overcome these performance issues. Accordingly, a review of inductor saturation and core materials is performed, and the motivation on the use of saturable inductors is clarified. Then, two-phase exact modelling of the 3P3W VSC control system is obtained and the drawbacks of CSCC have been demonstrated analytically. Based on the exact modelling, the inverse system dynamic model of the nonlinear system is obtained and employed such that the nonlinear plant is converted to a fictitious linear inductor system for linear current regulators to perform satisfactorily.


Sign in / Sign up

Export Citation Format

Share Document