Using the arithmetic representation properties of data to reduce the area and power consumption of FFT circuits for wireless OFDM systems

Author(s):  
Andreas Brokalakis ◽  
Vassilis Paliouras
Energies ◽  
2019 ◽  
Vol 12 (4) ◽  
pp. 599
Author(s):  
Seong-Joon Shim ◽  
Seung-Jin Choi ◽  
Hyoung-Kyu Song

For a low complexity signal detector to reduce the power consumption for multiple input and multiple output orthogonal frequency division multiplexing (MIMO-OFDM) systems, the depth-first sphere decoding (DFSD) detection scheme was proposed. However, the DFSD detection scheme still has high complexity in the hardware implementation. The complexity is especially high when the signal-to-noise ratio (SNR) is low. Therefore, this paper proposes an adaptive DFSD detection scheme. The proposed detection scheme arrays nodes, sorting by ascending order of squared Euclidean distance (ED) at the top layer of tree structure. Then, the proposed detection scheme uses the different number of nodes according to thresholds based on channel condition. In the simulation results, the proposed detection scheme has similar error performance and low complexity compared with the conventional DFSD detection scheme. Therefore, the proposed detection scheme reduces the power consumption in the signal detector.


2016 ◽  
Vol 15 (6) ◽  
pp. 1305-1317 ◽  
Author(s):  
Ebrahim Bedeer ◽  
Octavia A. Dobre ◽  
Mohamed H. Ahmed ◽  
Kareem E. Baddour

2020 ◽  
Author(s):  
SMITA GAJANAN NAIK ◽  
Mohammad Hussain Kasim Rabinal

Electrical memory switching effect has received a great interest to develop emerging memory technology such as memristors. The high density, fast response, multi-bit storage and low power consumption are their...


2020 ◽  
Vol 64 (1-4) ◽  
pp. 165-172
Author(s):  
Dongge Deng ◽  
Mingzhi Zhu ◽  
Qiang Shu ◽  
Baoxu Wang ◽  
Fei Yang

It is necessary to develop a high homogeneous, low power consumption, high frequency and small-size shim coil for high precision and low-cost atomic spin gyroscope (ASG). To provide the shim coil, a multi-objective optimization design method is proposed. All structural parameters including the wire diameter are optimized. In addition to the homogeneity, the size of optimized coil, especially the axial position and winding number, is restricted to develop the small-size shim coil with low power consumption. The 0-1 linear programming is adopted in the optimal model to conveniently describe winding distributions. The branch and bound algorithm is used to solve this model. Theoretical optimization results show that the homogeneity of the optimized shim coil is several orders of magnitudes better than the same-size solenoid. A simulation experiment is also conducted. Experimental results show that optimization results are verified, and power consumption of the optimized coil is about half of the solenoid when providing the same uniform magnetic field. This indicates that the proposed optimal method is feasible to develop shim coil for ASG.


2020 ◽  
pp. 57-62
Author(s):  
Olga Yu. Kovalenko ◽  
Yulia A. Zhuravlyova

This work contains analysis of characteristics of automobile lamps by Philips, KOITO, ETI flip chip LEDs, Osram, General Electric (GE), Gtinthebox, OSLAMPledbulbs with H1, H4, H7, H11 caps: luminous flux, luminous efficacy, correlated colour temperature. Characteristics of the studied samples are analysed before the operation of the lamps. The analysis of the calculation results allows us to make a conclusion that the values of correlated colour temperature of halogen lamps are close to the parameters declared by manufacturers. The analysis of the study results has shown that, based on actual values of correlated colour temperature, it is not advisable to use LED lamps in unfavourable weather conditions (such as rain, fog, snow). The results of the study demonstrate that there is a slight dispersion of actual values of luminous flux of halogen lamps by different manufacturers. Maximum variation between values of luminous flux of different lamps does not exceed 14 %. The analysis of the measurement results has shown that actual values of luminous flux of all halogen lamps comply with the mandatory rules specified in the UN/ECE Regulation No. 37 and luminous flux of LED lamps exceeds maximum allowable value by more than 8 %. Luminous efficacy of LED lamps is higher than that of halogen lamps: more than 82 lm/W and lower power consumption. The results of the measurements have shown that power consumption of a LED automobile lamp is lower than that of similar halogen lamps by 3 times and their luminous efficacy is higher by 5 times.


2014 ◽  
pp. 192-196
Author(s):  
A. Drozd ◽  
◽  
S. Mileiko ◽  
V. Kalinichenko ◽  
N. Ulchenko
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document