Right-Half-Plane Zero Elimination of Boost Converter Using Magnetic Coupling With Forward Energy Transfer

2019 ◽  
Vol 66 (11) ◽  
pp. 8454-8462 ◽  
Author(s):  
Behzad Poorali ◽  
Ehsan Adib
Keyword(s):  
Energy Transfer ◽  
Half Plane ◽  
Magnetic Coupling ◽  
Boost Converter ◽  
Forward Energy

A new technique for right half plane zero elimination from dynamics of a boost converter using magnetic coupling concept

Circuit World ◽  
2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Alireza Goudarzian
Keyword(s):  
Dynamic Response ◽  
Half Plane ◽  
Phase Structure ◽  
Voltage Regulation ◽  
Boost Converter ◽  
Open Loop ◽  
Positive Zero ◽  
Voltage Gain ◽  
Minimum Phase ◽  
Content Type

Purpose Control-signal-to-output-voltage transfer function of the conventional boost converter has at least one right-half plane zero (RHPZ) in the continuous conduction mode which can restrict the open-loop bandwidth of the converter. This problem can complicate the control design for the load voltage regulation and conversely, impact on the stability of the closed-loop system. To remove this positive zero and improve the dynamic performance, this paper aims to suggest a novel boost topology with a step-up voltage gain by developing the circuit diagram of a conventional boost converter. Design/methodology/approach Using a transformer, two different pathways are provided for a classical boost circuit. Hence, the effect of the RHPZ can be easily canceled and the voltage gain can be enhanced which provides conditions for achieving a smaller working duty cycle and reducing the voltage stress of the power switch. Using this technique makes it possible to achieve a good dynamic response compared to the classical boost converter. Findings The observations show that the phase margin of the proposed boost converter can be adequately improved, its bandwidth is largely increased, due to its minimum-phase structure through RHPZ cancellation. It is suitable for fast dynamic response applications such as micro-inverters and fuel cells. Originality/value The introduced method is analytically studied via determining the state-space model and necessary criteria are obtained to achieve a minimum-phase structure. Practical observations of a constructed prototype for the voltage conversion from 24 V to 100 V and various load conditions are shown.

scholarly journals Design issues and performance analysis of CCM boost converters with RHP zero mitigation via inductor current sensing

2020 ◽  
Author(s):  
Mauro Leoncini ◽  
Salvatore Levantino ◽  
Massimo Ghioni
Keyword(s):  
Half Plane ◽  
Dynamic Performance ◽  
Tracking Error ◽  
Boost Converter ◽  
Design Guidelines ◽  
System Stability ◽  
Current Sensing ◽  
Practical Applications ◽  
The Right ◽  
The Impact

AbstractThe right-half plane (RHP) zero in the control to output voltage transfer function of a boost converter operating in the continuous conduction mode limits the loop bandwidth. By injecting a scaled version of the inductor current into the loop, it is possible to shift the zero from the right-half plane to the left-half plane, which leads to increased stability of the control loop. This solution generates a static voltage error at the output of the converter (tracking error), which may be unacceptable in practical applications. A few strategies to mitigate or correct this tracking error have been suggested. However, they have never been fully assessed. This paper thoroughly investigates the impact of the RHP zero mitigation technique on the dynamic performance of a boost converter, and identifies the complex trade-off between the system stability, transient response, and tracking error correction capability. Based on these findings, design guidelines are provided to help maximize system performance. A representative case study is considered to highlight the performance benefits and simulation results are presented to validate the analysis.

An Improved Zero Voltage Transition PWM Boost Converter with an Active Snubber Cell

2016 ◽  
Vol 25 (10) ◽  
pp. 1650128 ◽  
Author(s):  
Sevilay Cetin
Keyword(s):  
Energy Transfer ◽  
Boost Converter ◽  
Maximum Efficiency ◽  
Current Stress ◽  
Zero Voltage Switching ◽  
Turn On ◽  
Zero Current Switching ◽  
Zero Current ◽  
Voltage Stress ◽  
Zero Voltage

This study presents an improved zero voltage switching (ZVS) boost converter with an active snubber cell providing soft switched operation for all semiconductors. The active snubber cell reduces the reverse recovery loss of the boost diode and also provides the zero voltage transition (ZVT) Turn-on and ZVS Turn-off for the boost switch. The zero current switching (ZCS) Turn-on and ZVS Turn-off for the snubber switch is also achieved. All diodes in the converter can be operated with soft switching (SS). In the snubber cell, SS energy can be transfered effectively to the output by the use of a snubber inductor and a capacitor. This energy transfer allows the use of additional parallel connected capacitor to the boost switch to provide ZVS turning off. There is no additional voltage and current stress on the boost switch and boost diode. The voltage stress of the snubber switch is also limited by the output voltage and the current stress of the snubber switch is reduced by the energy transfer to the output. SS operating of the semiconductors is maintained at very wide load ranges. The operation of the proposed converter is presented with a detailed steady state analysis. The predicted theoretical analysis is validated by a prototype with 500[Formula: see text]W output power and 100[Formula: see text]kHz operating frequency. The measured maximum efficiency values are obtained as approximately 97% and 85.4% at full load and 10% load conditions, respectively.

Sign in / Sign up

Export Citation Format

Share Document