An IOT Based Nurse Calling System for Real-time Emergency Alert Using Local Wireless Network

2021 ◽  
Author(s):  
Omar Faruk Riyad ◽  
Ahraf Sharif ◽  
Arif Ur Rahman Chowdhury Suhan ◽  
Mohammad Monirujjaman Khan
Keyword(s):  
Real Time ◽  
Wireless Network

The Design of ZigBee Wireless Network for the Detection Platform of the Cylinders

2012 ◽  
Vol 241-244 ◽  
pp. 2504-2509
Author(s):  
Yan Li ◽  
Qiao Xiang Gu
Keyword(s):  
Real Time ◽  
Wireless Network ◽  
Environmental Conditions ◽  
Protocol Stack ◽  
The Real ◽  
The Core ◽  
Core Components ◽  
Real Time Detection ◽  
Cable Connection

The equipment, called detection platform of the cylinders, is used for detecting cylinders so that cylinders can be at ease use. In order to transmit the real-time detection data to PC for further processing, the platform should be connected with PC. Cable connection, in some production and environmental conditions, is limited. Under the circumstance, building wireless network is the better choice. Through comparative studying, ZigBee is chosen to be the technology for building wireless network. ZigBee chip and ZigBee2006 protocol stack are the core components in the ZigBee nodes.

Using Computational Intelligence for Improved Teleoperation over Wireless Network

2012 ◽  
pp. 102-123 ◽  
Author(s):  
Salman H. Khan ◽  
Arsalan H. Khan ◽  
Zeashan H. Khan
Keyword(s):  
Applied Sciences ◽  
Real Time ◽  
Wireless Network ◽  
Computational Intelligence ◽  
Networked Control Systems ◽  
Engineering Applications ◽  
Intelligent Decision ◽  
Application Requirements

The role of computational intelligence techniques in applied sciences and engineering is becoming popular today. It is essential because the autonomous engineering applications require intelligent decision in real time in order to achieve the desired goal. This chapter discusses some of the approaches to demonstrate various applications of computational intelligence in dependable networked control systems and a case study of teleoperation over wireless network. The results have shown that computational intelligence algorithms can be successfully implemented on an embedded application to offer an improved online performance. The different approaches have been compared and could be chosen as per application requirements.

5G for IoT

2020 ◽  
pp. 1-23
Author(s):  
Nidhi Sharma ◽  
Priyanka Ahlawat
Keyword(s):  
Wireless Networks ◽  
Internet Of Things ◽  
Real Time ◽  
Wireless Network ◽  
Network Technology ◽  
Mission Critical ◽  
Management Capabilities

The 5th Generation of wireless network technology (5G) is a rising set of cellular technologies, specifications and projected standards that promise to dramatically improve the speed and responsiveness of wireless networks. The arrival of 5G guarantees new architectures for connecting billions of IoT (Internet of Things) devices and introduces a bunch of development challenges for sensible applications. Enterprises measure are trying to find out the solutions for omnipresent property and near-real-time remote solutions and management capabilities for mission-critical IoT systems and 5G is here to answer that decision.

A CNC Equipment Distributed Monitoring System Based on Cloud Computing Technology

2014 ◽  
Vol 1022 ◽  
pp. 392-395 ◽  
Author(s):  
Rang Yong Zhang ◽  
Geng Ma ◽  
Guang He Cheng
Keyword(s):  
Cloud Computing ◽  
Real Time ◽  
Wireless Network ◽  
Monitoring System ◽  
Communication Technology ◽  
Wide Area ◽  
Distributed Monitoring ◽  
Real Time Monitoring ◽  
Computing Technology ◽  
Remote Diagnostics

CNC equipment distributed monitoring system based on cloud computing technology provides a sable and reliable remote real time monitoring system to monitoring a mount of CNC equipment distributed in a large wide area by wireless network and GPRS communication technology which can be used to remote diagnostics and improve service respond speed.

Testing MANET Protocol using Zigbee based Xbee Modules

2016 ◽  
Vol 3 (2) ◽  
pp. 441
Author(s):  
S. Sundar ◽  
Piyush Arora ◽  
Sarthak Agrawal ◽  
R. Kumar ◽  
Harish M. Kittur
Keyword(s):  
Wireless Sensor Network ◽  
Internet Of Things ◽  
Mobile Phone ◽  
Real Time ◽  
Sensor Network ◽  
Wireless Network ◽  
Wireless Sensor ◽  
The Internet ◽  
Popular Approach ◽  
The Internet Of Things

<p>In the last few years,there has been big interest in adhoc wireless network as they have tremendous military and commercial potential[1].Traditionally to test various parameters in the MANET , the most popular approach is to use mobile phone and Laptops and use the popular WIFI based protocol . But in the recent years there is a huge attraction towards the Internet Of things and specifically wireless sensor network. In this paper we are going to test the MANET protocol using zigbee based XBee modules specifally to determine the Range and Throughput of the Xbee netowork using XCTU Software . The sensor network will be deployed in the car parking application to see the parameters in the real time and dynamically see the sustainability of the network .The network is being designed keeping in mind that the nodes are mobile and at the same time the network does not require a standard infrastructure.</p>

A Simulation Study of Wireless Network Performance

2014 ◽  
Vol 679 ◽  
pp. 176-183
Author(s):  
Ahmad Zulhusny Rozali ◽  
Robert Stewart ◽  
Sean Kennedy
Keyword(s):  
Data Collection ◽  
Real Time ◽  
Wireless Network ◽  
Simulation Study ◽  
Network Performance ◽  
Early Stage ◽  
Reliable Data ◽  
Future Research ◽  
Area Of Interest

WSN technology has now become ubiquitous due to its flexibility, efficiency and affordability. For example the nodes in a WSN can be easily deployed in any targeted area and last for many years. The nodes can supply reliable data from within the environment with minimal disturbance to the target area.However challenges remain in providing real-time communication in some communication hostile conditions. It may not always be possible to leave the sensors in situ but instead data collection is through the use of mobile a WSN. For example as a vehicle fitted with sensing devices passes through an area of interest data is collected and relayed at certain gateway nodes back to a backhaul network for processing.In this paper our aim is to analyse the interference caused by a mobile jammer node to the stationary transmitter and receiver nodes in a network by using the OPNET Modeler software. This is early stage work aimed at developing a mobile WSN node in our future research.

The Research of Vibrator Wireless Monitoring System Based on Compressive Sensing

2011 ◽  
Vol 301-303 ◽  
pp. 1612-1617
Author(s):  
Wei Shen ◽  
Jun Zheng Wang ◽  
Jing Li
Keyword(s):  
Compressive Sensing ◽  
Real Time ◽  
Wireless Network ◽  
Monitoring System ◽  
Wireless Monitoring ◽  
Sensing Technology ◽  
Time Operation ◽  
Remote Management ◽  
Real Time Operation ◽  
Acquisition Device

The vibrator wireless monitoring system is designed based on Zigbee and the theory of compressive sensing. This system consists of the sensor wireless acquisition device, the vibrator wireless automation recorder and the vibrator remote management computer. Different modules of the system communicate via the Zigbee wireless network. The data to transmit is compressed by applying compressive sensing technology. As result, the quantity of the data transmition decreases sharply with the reliability and real–time operation being ensured. The system is already in use and the effectiveness is proved.

Sign in / Sign up

Export Citation Format

Share Document