C-fos and c-jun Proto-Oncogene Expression Is Decreased in Psoriasis: an In Situ Quantitative Analysis

A method is presented for measuring the thickness of the intima-media layer of the normal rabbit descending thoracic aortic wall under both relaxed (excised) and specified simulated in vivo conditions. The in vivo conditions were simulated by maintaining the aorta in situ at its normal longitudinal extension while perfusing its lumen at the normal mean arterial pressure with a mixture of liquid silicone polymer and a catalyst, thus providing physiological radial distension. After the rubber cured, both relaxed and extended-distended tissue segments were obtained from adjacent sites on the same aorta. These tissue segments were fixed and further processed for measurement of their medial thicknesses by light microscopy. This data was used to estimate the ratio of the medial thickness of the relaxed, excised aorta to that under in vivo conditions, 1.72 +/- 0.15. This information is required for quantitative analysis of data obtained from previous studies of in vivo macromolecular transport across the rabbit thoracic aortic wall.

Download Full-text

The application of the in situ high-temperature X-ray diffraction quantitative analysis

Journal of Alloys and Compounds ◽

10.1016/j.jallcom.2007.03.012 ◽

2008 ◽

Vol 452 (2) ◽

pp. 446-450 ◽

Cited By ~ 5

Author(s):

Qiuguo Xiao ◽

Ling Huang ◽

Hui Ma ◽

Xinhua Zhao

Keyword(s):

High Temperature ◽

Quantitative Analysis ◽

X Ray Diffraction ◽

X Ray

Download Full-text

Differences in HPV 16- and HPV 18 E6/E7 oncogene expression between in situ and invasive adenocarcinomas of the cervix uteri

Virchows Archiv ◽

10.1007/s004280000277 ◽

2000 ◽

Vol 437 (5) ◽

pp. 491-500 ◽

Cited By ~ 31

Author(s):

Sabine Riethdorf ◽

Lutz Riethdorf ◽

Karin Milde-Langosch ◽

Tjoung-Won Park ◽

Thomas Löning

Keyword(s):

Cervix Uteri ◽

Hpv 16 ◽

Oncogene Expression ◽

Hpv 18 ◽

E7 Oncogene

Download Full-text

Growth of AlN by Reactive Gas Injection of Nitrogen in an AlMg Matrix

Advanced Materials Research ◽

10.4028/www.scientific.net/amr.1036.117 ◽

2014 ◽

Vol 1036 ◽

pp. 117-121

Author(s):

Ildiko Peter ◽

Raluca Maria Florea ◽

Oana Bălţătescu ◽

Ioan Carcea

Keyword(s):

Quantitative Analysis ◽

Aluminum Nitride ◽

Composite Structure ◽

Volume Fraction ◽

Primary Objective ◽

Structure Characterization ◽

Alloy Matrix ◽

Typical Structure ◽

Reactive Gas

The primary objective of the present research was to provide a fundamental understanding of the processing science necessary to fabricate the Aluminum Nitride (AIN) reinforced Aluminum-Magnesium (AIMg) composites via Reactive Gas (N2) Injection in the AIMg alloy melt. Aluminum nitride (AlN) matrix composites were prepared by a novel approach. It was possible to produce a considerable amount of AIN particles in the AI alloy matrix at a reaction temperature as low as 900 °C utilizing the in-situ nitration reaction process developed in the present study. The volume fraction of AIN increases almost linearly with increasing the magnesium (Mg) content in the alloy and the reaction time. The shapes of AIN particles were found to have different forms, whose sizes were in the range from submicron to a few microns. From the present study, it is concluded that the new innovative in-situ nitridation process developed in the present study can be successfully applied for processing of high strength AIMg/AIN composites. For particles and composite structure characterization some methods were used, including: scanning microscopy, quantitative analysis of selected composite regions and XRD analyses. Composite structure and reinforcement distribution was compared with use of quantitative analysis. Morphology and diffraction pattern of aluminum nitride particles was shown. Typical structure of studied composites with microanalysis results was indicated. Aluminum nitride dispersion change was represented.

Download Full-text

A Direct Quantitative Raman Method for the Measurement of Dissolved Bisulfate in Acid-Sulfate Fluids

Applied Spectroscopy ◽

10.1177/0003702818773117 ◽

2018 ◽

Vol 72 (8) ◽

pp. 1234-1243 ◽

Cited By ~ 4

Author(s):

Shichuan Xi ◽

Xin Zhang ◽

Zhendong Luan ◽

Zengfeng Du ◽

Lianfu Li ◽

...

Keyword(s):

Quantitative Analysis ◽

Physicochemical Parameters ◽

Water Molecules ◽

Analysis Method ◽

Hydrogen Phosphate ◽

Acid Sulfate ◽

Different Temperatures ◽

Quantitative Analysis Method ◽

In Situ Detection

Raman spectroscopy has been applied to the quantitative analysis of the concentration of bisulfate in acid-sulfate fluids at different temperatures. The quantitative analysis method is based on the peak area ratios of [Formula: see text](ν1) and H2O (ν2), where PA([Formula: see text]/H2O) = [[Formula: see text]] × (0.0066 × T + 1.3070) at a temperature range of 0–100 ℃. We found that the molal scattering coefficient of bisulfate increases slightly at the elevated temperature may be due to the changes of fraction of water molecules that are hydrogen-bonded. The method can also be applied to analyze physicochemical parameters of other acid fluids, such as hydrogen phosphate, bicarbonate, etc., and especially to the in situ detection of deep sea acid-sulfate hydrothermal fluids in the future.

Download Full-text

Quantitative Analysis of TiB 2 Particles and Properties of Cu-TiB 2 Composite Prepared by in Situ Reaction

Rare Metal Materials and Engineering ◽

10.1016/s1875-5372(18)30039-0 ◽

2017 ◽

Vol 46 (11) ◽

pp. 3260-3266 ◽

Cited By ~ 3

Author(s):

Xia Meng ◽

Feng Yi ◽

Tian Pei ◽

Song Zhaokun ◽

Zhao Lan ◽

...

Keyword(s):

Quantitative Analysis ◽

In Situ Reaction

Download Full-text

Designing Mobile Multimodal Applications

Multimodality in Mobile Computing and Mobile Devices ◽

10.4018/978-1-60566-978-6.ch005 ◽

2010 ◽

pp. 106-135 ◽

Cited By ~ 3

Author(s):

Marco de Sá ◽

Carlos Duarte ◽

Luís Carriço ◽

Tiago Reis

Keyword(s):

Quantitative Analysis ◽

Mobile Application ◽

Early Stage ◽

Evaluation Process ◽

Scenario Generation ◽

Blind Users ◽

Digital Books ◽

Support Evaluation

In this chapter we describe a set of techniques and tools that aim at supporting designers while creating mobile multimodal applications. We explain how the additional difficulties that designers face during this process, especially those related to multimodalities, can be tackled. In particular, we present a scenario generation and context definition framework that can be used to drive design and support evaluation within realistic settings, promoting in-situ design and richer results. In conjunction with the scenario framework, we detail a prototyping tool that was developed to support the early stage prototyping and evaluation process of mobile multimodal applications, from the first sketch-based prototypes up to the final quantitative analysis of usage results. As a case study, we describe a mobile application for accessing and reading rich digital books. The application aims at offering users, in particular blind users, means to read and annotate digital books and it was designed to be used on Pocket PCs and Smartphones, including a set of features that enhance both content and usability of traditional books.

Download Full-text

Quantitative Analysis of Sulpiride and Impurities of 2-Aminomethyl-1-Ethylpyrrolidine and Methyl-5-Sulphamoyl-2-Methoxybenzoate in Pharmaceuticals by High-Performance Thin-Layer Chromatography and Scanning Densitometry

Journal of AOAC International ◽

10.1093/jaoac/82.4.825 ◽

1999 ◽

Vol 82 (4) ◽

pp. 825-829 ◽

Cited By ~ 3

Author(s):

Danica Agbaba ◽

Tatjana Miljkovic ◽

Valentina Marinkovic ◽

Dobrila Zivanov-Stakic ◽

Sote Vladimirov

Keyword(s):

Quantitative Analysis ◽

Thin Layer ◽

High Performance ◽

Methylene Chloride ◽

Solvent System ◽

Ammonia Solution ◽

Dosage Forms ◽

Raw Material ◽

Layer Chromatography

Abstract A simple and reliable thin-layer chromatographic method for determining sulpiride and impurities of 2-aminomethyl-1-ethylpyrrolidine and methyl-5-sulphamoyl-2-methoxybenzoate was developed and validated. A methylene chloride–methanol–ammonia solution (25%; 18 + 2.8 + 0.4, v/v) solvent system is used for separation and quantitative evaluation of chromatograms. The chromatographic plate is first scanned at 240 nm to locate chromatographic zones corresponding to sulpiride and methyl-5-sulphamoyl-2-methoxybenzoate. Then 2-aminomethyl-1-ethylpyrrolidine is derivatized in situ with ninhydrin, and resulting colored spots are measured at 500 nm. The method is reproducible and convenient for quantitative analysis and purity control of sulpiride in its raw material and in its dosage forms.

Download Full-text