Response of Algal Biomass to Large-Scale Nutrient Controls in the Clark Fork River, Montana, United States1

2012 ◽  
Vol 48 (5) ◽  
pp. 1008-1021 ◽  
Author(s):  
Michael W. Suplee ◽  
Vicki Watson ◽  
Walter K. Dodds ◽  
Chris Shirley
2010 ◽  
Vol 7 (1) ◽  
pp. 82 ◽  
Author(s):  
K. L. Plathe ◽  
F. von der Kammer ◽  
M. Hassellöv ◽  
J. Moore ◽  
M. Murayama ◽  
...  

Environmental context. Determining associations between trace metals and nanoparticles in contaminated systems is important in order to make decisions regarding remediation. This study analysed contaminated sediment from the Clark Fork River Superfund Site and discovered that in the <1-μm fraction the trace metals were almost exclusively associated with nanoparticulate Fe and Ti oxides. This information is relevant because nanoparticles are often more reactive and show altered properties compared with their bulk equivalents, therefore affecting metal toxicity and bioavailability. Abstract. Analytical transmission electron microscopy (aTEM) and flow field flow fractionation (FlFFF) coupled to multi-angle laser light scattering (MALLS) and high-resolution inductively coupled plasma mass spectroscopy (HR-ICPMS) were utilised to elucidate relationships between trace metals and nanoparticles in contaminated sediment. Samples were obtained from the Clark Fork River (Montana, USA), where a large-scale dam removal project has released reservoir sediment contaminated with toxic trace metals (namely Pb, Zn, Cu and As) which had accumulated from a century of mining activities upstream. An aqueous extraction method was used to recover nanoparticles from the sediment for examination; FlFFF results indicate that the toxic metals are held in the nano-size fraction of the sediment and their peak shapes and size distributions correlate best with those for Fe and Ti. TEM data confirms this on a single nanoparticle scale; the toxic metals were found almost exclusively associated with nano-size oxide minerals, most commonly brookite, goethite and lepidocrocite.


2021 ◽  
Vol 12 ◽  
Author(s):  
Xiaoxiang Miao ◽  
Jie Xiao ◽  
Shiliang Fan ◽  
Yu Zang ◽  
Xuelei Zhang ◽  
...  

An epiphytic gammarid species, Apohyale sp., was abundant in the floating Ulva prolifera (U. prolifera), which forms large-scale green tides in the Yellow Sea (YSGT). Field observation and laboratory experiments were subsequently conducted to study the species identity, abundance, and grazing effects on the floating algal biomass. The abundance of Apohyale sp. showed great spatial variation and varied from 0.03 to 1.47 inds g−1 in the YSGT. In average, each gram of Apohyale sp. body mass can consume 0.43 and 0.60 g algal mass of U. prolifera per day, and the grazing rates varied among the algae cultured with different nutritional seawaters. It was estimated that grazing of Apohale sp. could efficiently reduce ~0.4 and 16.6% of the algal growth rates in Rudong and Qingdao, respectively. The U. prolifera fragments resulting from gnawing of Apohyale sp. had a higher growth rate and similar photosynthetic activities compared to the floating algae, indicating probably positive feedback on the floating algal biomass. This research corroborated the significant impact of Apohyale sp. on the floating algal mass of YSGT through the top-down control. However, further research is needed to understand the population dynamics of these primary predators and hence their correlation with the expansion or decline of YSGT, especially under the complex food webs in the southern Yellow Sea.


2019 ◽  
Vol 21 (1) ◽  
pp. 82-89 ◽  

<p>New challenges for industrial microbiology and biotechnology of algae are to increase the efficiency of microalgae growth rates and decrease the cultivation costs. Algae could be cultivated in fresh water as well as in salty sea water or wastewater. Microalgae biomass can be used as a sorbent to remove microcontaminants (e.g. heavy metals, biogens) from wastewater. The obtained results showed that there is a possibility of application of a cheap and universal growing medium (Bf) despite common fertilizers: Bristol or BG-11 to cultivate Chlorella vulgaris and Scenedesmus armatus. The mixotrophic condition can be useful for cultivation of Chlorella vulgaris and Scenedesmus armatus. The highest concentrations of algal biomass for both species were determined after the application of the Bf medium, lower after the BG-11 medium and the lowest after the Br medium in autotrophic as well as mixotrophic conditions. The number of C. vulgaris cells in mixotrophic conditions was higher than S. armatus. The utilization of cheap growing media will lowering the production costs of algal biomass on a large scale.</p>


Author(s):  
Sourav Kumar Bagchi ◽  
Reeza Patnaik ◽  
Ramasare Prasad

The two major bottlenecks faced during microalgal biofuel production are, (a) higher medium cost for algal cultivation, and (b) cost-intensive and time consuming oil extraction techniques. In an effort to address these issues in the large scale set-ups, this comprehensive review article has been systematically designed and drafted to critically analyze the recent scientific reports that demonstrate the feasibility of microalgae cultivation using wastewaters in outdoor raceway ponds in the first part of the manuscript. The second part describes the possibility of bio-crude oil production directly from wet algal biomass, bypassing the energy intensive and time consuming processes like dewatering, drying and solvents utilization for biodiesel production. It is already known that microalgal drying can alone account for ∼30% of the total production costs of algal biomass to biodiesel. Therefore, this article focuses on bio-crude oil production using the hydrothermal liquefaction (HTL) process that converts the wet microalgal biomass directly to bio-crude in a rapid time period. The main product of the process, i.e., bio-crude oil comprises of C16-C20 hydrocarbons with a reported yield of 50–65 (wt%). Besides elucidating the unique advantages of the HTL technique for the large scale biomass processing, this review article also highlights the major challenges of HTL process such as update, and purification of HTL derived bio-crude oil with special emphasis on deoxygenation, and denitrogenation problems. This state of art review article is a pragmatic analysis of several published reports related to algal crude-oil production using HTL technique and a guide towards a new approach through collaboration of industrial wastewater bioremediation with rapid one-step bio-crude oil production from chlorophycean microalgae.


2009 ◽  
Vol 2009 (7) ◽  
pp. 7972-7977
Author(s):  
Kimberleigh C. Dinkins ◽  
Mark J. Zivojnovich ◽  
E. Allen Stewart ◽  
Robinson Bazurto

2017 ◽  
Vol 58 (75pt1) ◽  
pp. 68-77 ◽  
Author(s):  
Emiliano Cimoli ◽  
Arko Lucieer ◽  
Klaus M. Meiners ◽  
Lars Chresten Lund-Hansen ◽  
Fraser Kennedy ◽  
...  

ABSTRACTIce algae are a key component in polar marine food webs and have an active role in large-scale biogeochemical cycles. They remain extremely under-sampled due to the coarse nature of traditional point sampling methods compounded by the general logistical limitations of surveying in polar regions. This study provides a first assessment of hyperspectral imaging as an under-ice remote-sensing method to capture sea-ice algae biomass spatial variability at the ice/water interface. Ice-algal cultures were inoculated in a unique inverted sea-ice simulation tank at increasing concentrations over designated cylinder enclosures and sparsely across the ice/water interface. Hyperspectral images of the sea ice were acquired with a pushbroom sensor attaining 0.9 mm square pixel spatial resolution for three different spectral resolutions (1.7, 3.4, 6.7 nm). Image analysis revealed biomass distribution matching the inoculated chlorophyll a concentrations within each cylinder. While spectral resolutions >6 nm hindered biomass differentiation, 1.7 and 3.4 nm were able to resolve spatial variation in ice algal biomass implying a coherent sensor selection. The inverted ice tank provided a suitable sea-ice analogue platform for testing key parameters of the methodology. The results highlight the potential of hyperspectral imaging to capture sea-ice algal biomass variability at unprecedented scales in a non-invasive way.


Author(s):  
Clara Deal ◽  
Meibing Jin ◽  
Scott Elliott ◽  
Elizabeth Hunke ◽  
Mathew Maltrud ◽  
...  

Green ◽  
2013 ◽  
Vol 3 (3-4) ◽  
Author(s):  
Yusuf Chisti

AbstractRaceway ponds, or “high-rate algal ponds”, of various configurations have been used to treat wastewater since the 1950s. They are also known as Oswald ponds after their inventor W. J. Oswald. Large-scale outdoor culture of microalgae and cyanobacteria in raceways is well established (Terry and Raymond 1985; Oswald 1988; Borowitzka and Borowitzka 1989; Becker 1994; Lee 1997; Molina Grima 1999; Pulz 2001; Borowitzka 2005; Spolaore et al. 2006). Raceway culture is used commercially in the United States, Thailand, China, Israel and elsewhere, mostly to produce algae for relatively highvalue applications. This chapter is focused on raceways typically used in the production of algal biomass and not in the treatment of wastewater. The engineering design, operation and performance characteristics of raceways are discussed. The biomass productivity of the raceways is assessed in relation to limits imposed by algal biology. The economics of algal oil production in raceways are discussed.


Sign in / Sign up

Export Citation Format

Share Document